DYEING OF WOOL/POLYESTER BLENDED FABRICS USING BASIC DYES. | ||||
Al-Azhar Bulletin of Science | ||||
Article 9, Volume 22, Issue 2-A, December 2011, Page 93-112 PDF (110.15 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/absb.2011.7020 | ||||
View on SCiNiTO | ||||
Abstract | ||||
The main task of this study is to establish a one step dyeing of wool/polyester blended fabric using basic dyes. Wide range of parameters has been studied such as pH values, PEG-600 concentration, dyeing technique, fixation time and temperature. The best dyeing conditions were achieved, using different colors of basic dyes at pH 9. The color strength (K/S) values of the dyed blend with temperature increased rapidly the fixation time and temperature until 30 min. at 130˚C.This was followed by a relatively increase in the k/s values by using different amounts of PEG-600. The dyeing technique has an important effect on the k/s values and the improvement can follow the decreasing order of exhaustion under pressure< exhaustion< pad-dry cure method. | ||||
Keywords | ||||
wool; polyester; basic dyes | ||||
Statistics Article View: 170 PDF Download: 263 |
||||