NUMERICAL ANALYSIS OF LIQUEFACTION PHENOMENON BY USING UBC3D-PLM CONSTITUTIVE MODEL | ||||
| Journal of Advanced Engineering Trends | ||||
| Article 5, Volume 38, Issue 2, July 2019, Page 81-96 PDF (1.34 MB) | ||||
| DOI: 10.21608/jaet.2020.73029 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Amr Mohey Mohamed  1; Mohamed Abd El Fattah2; Ahmed Mohamed hassan2; Ahmed Moussa Abu Bakr3
| ||||
| 1Civil engineer | ||||
| 2Associate Professor in Civil Engineering Dept., Faculty of Engineering, Minia University | ||||
| 3Associate Professor in Civil Engineering Dept., Faculty of Engineering, Minia University, | ||||
| Abstract | ||||
| This research is considering of numerical analysis of liquefaction phenomenon by using UBC3D-PLM constitutive model. Liquefaction is a phenomenon in which the strength and stiffness of a soil is reduced by earthquake shaking or other rapid loading. Liquefaction occurs in saturated soils, that is, soils in which the space between individual particles is completely filled with water. This water exerts a pressure on the soil particles that influences how tightly the particles themselves are pressed together. Prior to an earthquake, the water pressure is relatively low. However, earthquake shaking can cause the water pressure to increase to the point where the soil particles can readily move with respect to each other. The UBC3D-PLM is one of the most commonly used constitutive models for liquefaction problems in practice. Even though it is an advanced model, it is relatively simple to apply, since it has a reasonable number of parameters that can be extracted from laboratory or in situ tests. The model was initially developed for sand-like soils having the potential for liquefaction under seismic loading. The UBC3D-PLM model has been developed by Tsegayce (2010) and implemented as a user defined model in PLAXIS. In this research, the capability of this model is considered by using PLAXIS software. The real data of El Centro earthquake 1940, Imperial Valley earthquake 1979 and Upland earthquake 1990 were used. The results of the simulation have shown resembling trend of the UBC3D-PLM and HSSMALL models. This research compare between the results which get after earthquake on liquefied sand and strong layer (coarse sand). | ||||
| Keywords | ||||
| Liquefaction; Soil; Stress-strain; Pore-Water pressure; UBC3DPLM; HSSMALL; Earthquake impact | ||||
| References | ||||
|
[1] National Research Council (NRC), “Liquefaction of Soils During Earthquakes”,Washington DC: National Academy Press, 1985.
[2] Binkgreve, R. B. J. B “Selection of Soil Models and Parameters for Geotechnical Engineering Application”, J. Yamamuro, & V. Kaliakin (Eds.), Geotechnical Special Publication, 128, pp.69-98, 2005.
[3] Schweiger, H. F. “The Role of Advanced Constitutive Models in Geotechnical Engineering”, J. Geomechanics and Tunneling, 1(5), pp.336-344. 1981, 2008.
[4] Abbas Daftari, Wolfram Kudla, TU Freiberg, Stravros Savidis, TU Berlin, habil. Heinz Konietzky, TU Freiberg “New approach in prediction of soil liquefaction” Faculty of Geosciences, Geo-Engineering and Mining of the Technische Universität Bergakademie Freiberg,2015
[5] Brinkgreve, R. B. J, Bakker, K.J., and Bonnier,“ The relevance of small-strain soil stiffness in numerical simulation of excavation and tunneling projects", In: H.F. Schweiger (ed.) Numerical Methods in Geotechnical Engineering. Taylor & Francis. P.G .133-139. 2006.
[6] Beaty, M., and Byrne, P. “An effective stress model for predicting liquefaction behavior of sand”, Geotechnical Earthquake Engineering and Soil Dynamics III ASCE Geotechnical Special Publication No.75, 1:766-777, 1998.
[7] Beaty, M. and Byrne, P.“UBCSAND constitutive model: Version 904aR”, Documentation Report: UBCSAND Constitutive Model on Itasca UDM Web Site, Boulanger RW. Relating K_ to relative state parameter index. Journal of Geotechnical and Geoenvironmental Engineering, 2011; 129(8): 770–773. February 2011.
[8] Tsegaye. Plaxis liqueafaction model. report no. 1. PLAXIS knowledge base., 2010.
[9] Petalas, A., and Galavi, V. “PLAXIS Liquefaction Model UBC3D-PLM”, Retrieved from PLAXIS Website: http://kb.plaxis.nl/models/udsmubcsand3d- model. 2013.
[10] Schanz, T., Vermeer, P. A., and Bonnier, P. G. ,“The hardening soil model: formulation and verification”, Beyond 2000 in Computational Geotechnics, Balkema, Rotterdam, 1999.
[11] Duncan, J. M. and Chang, C. Y,“Nonlinear analysis of stress and strain in soils”, Journal of the Soil Mechanics and Foundations Division, ASCE, Vol. 96, pp. 1629-1653, 1970.
[12] Benz,“Small-strain stiffness of soil and its numerical consequences", Ph.D . Thesis, University Stuttgart. T, 2006. [13] Hardin, B.O., Drnevich,“Shear modulus and damping in soils: Design equations and curves”, Proc. ASCE: Journal of the Soil Mechanics and Foundations Division, 98(SM7), 667–692,1972 [14] USGS Description of the El Centro , Imperial Valley and Upland Earthquake and (strong-motion Virtual Data Center( VDC)) | ||||
|
Statistics Article View: 540 PDF Download: 1,582 |
||||
