STUDY OF POLYMETHACRYLIC ACID /SESBANIA GUM COMPOSITE AS THICKENING AGENT IN PRINTING WITH REACTIVE DYES | ||||
Al-Azhar Bulletin of Science | ||||
Article 13, Volume 21, Issue 2-A, December 2010, Page 173-188 PDF (1.42 MB) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/absb.2010.7374 | ||||
View on SCiNiTO | ||||
Authors | ||||
I. ABD EL-THALOUTH* 1; M. REKABY1; A. A. RAHMAN2; SH. A. EL-KHABERY1 | ||||
1Textile Research Division, National Research Center, Cairo, Egypt | ||||
2Faculty of science, Menoufia University, Menoufia, Egypt | ||||
Abstract | ||||
Galactomannan gum was isolated from Sesbania seeds and subjected to chemical modification via grafting with methacrylic acid monomers using potassium persulphate as intiator. The rheological properties of the prepared composites before and after storing for three and seven dyes were thoroughly investigated .Furthermore; the obtained composite was evaluated as thickening agent in reactive dye printing pastes of cotton fabrics. It was found that poly methacrylic acid / Sesbania seeds gum composites could be used as a substitute for sodium alginate in printing cotton fabrics with reactive dyes, where samples acquire soft handle, K/S and overall fastness properties were obtained, nearly equal to those printed using sodium alginate. These composites are compatible with sodium alginate and their mixture at a ratio of 1:1 (wt/wt), improving the K/S than that of pure sodium alginate. | ||||
Keywords | ||||
POLYMETHACRYLIC ACID; SESBANIA GUM COMPOSITE; Thickening agent; PRINTING WITH REACTIVE DYES | ||||
Statistics Article View: 190 PDF Download: 291 |
||||