Removal of Fe (III) from Aqueous Solution Using Thiosalcylic Acid as An Efficient Adsorbent | ||||
| Egyptian Journal of Chemistry | ||||
| Article 5, Volume 61, Issue 4, July and August 2018, Page 617-627 PDF (753.79 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/ejchem.2018.3312.1280 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
A. I Abd El-Hamid  1; H.F Aly2
| ||||
| 1Composite and Nanomaterials Department, Advanced Technology and New Materials Research Institute, City for Scientific Research and Technology Applications, P. O. Box 21934, SRTA, Egypt | ||||
| 2Hot Laboratories Center, Atomic Energy Authority, Nasr 13759, Egypt | ||||
| Abstract | ||||
| The removal of Fe (III) from aqueous solution using thiosalcylic acid (TSA) as adsorbent have been demonstrated in this work. TSA was Characterized by SEM, EDX, FTIR and XRD. Various factors affecting on the removal include the contact time, initial concentration of ions, adsorbent dose, initial pH and temperature have been studied. The experimental data showed that, the removal percent of Fe (III) ion is increased by increasing contact time, adsorbent dose and pH values. The sorption reaction was found to obey a pseudo second-order rate model with qe = 275.78 mg g-1. The sorption isotherms data fit Langmuir and Freundlich models. The waste solid from the adsorption process (thiosalcylic acid adsorbed Fe (TSA-Fe)) successful in removal of methylene blue (MB) and crystal violet (CV) dyes from binary system. | ||||
| Keywords | ||||
| Thiosalcylic acid; Fe (III); TSA-Fe; dye | ||||
|
Statistics Article View: 656 PDF Download: 704 |
||||
