Effect of simulating tooth brushing on surface change of different ceramic materials | ||||
| Egyptian Dental Journal | ||||
| Article 37, Volume 64, Issue 1 - January (Fixed Prosthodontics, Dental Materials, Conservative Dentistry & Endodontics), January 2018, Page 671-680 PDF (1.65 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/edj.2018.78077 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Khaled Haggag1; Muhammad Abbas2; Hussein Ramadan3; Mohamed Fawzy3 | ||||
| 1Assistant Professor, Crown and Bridge Department, Faculty of Dental Medicine, Al Azhar University, Egypt | ||||
| 2Assistant Professor, Dental Biomaterials Department, Faculty of Dental medicine, Al-Azhar University, Egypt | ||||
| 3Lecturer, Crown and Bridge Department, Faculty of Dental Medicine, Al Azhar University, Egypt | ||||
| Abstract | ||||
| Objectives: Purpose of the present study was to evaluate the surface roughness of current ceramics before and after tooth brushing abrasion, using simulated tooth brushing wear testing. Materials and Methods: 40 ceramic samples (Zirconia ceramics, Vita Enamic, Lava Ultimate, & E-max ceramics) were cut from corresponding 4 types of ceramic blocks using microtome, then 40 samples were divided into 4 groups (n=10). Each sample has a fixed dimension about 10 x 10 x 2mm (thickness). The 3-body simulated tooth brushing wear testing was performed using a programmable logic controlled equipment; ROBOTA chewing simulator* integrated with thermo-cyclic protocol, then Surface roughness of each material (Ra) was measured with USB digital surface profile gauge. Results: Total effect of material; regardless to toothbrush wear simulation cycles, totally there was no-significant (p=0.1379 > 0.05) difference between all materials where (Zr ≥ e.max ≥V enamic ≥ L ultimate) with their mean values respectively after 24 months (Zr; 0.25898 ±0.0035, e.max; 0.25428 ±0.0029, V enamic; 0.25413 ±0.0049, L ultimate; 0.25403 ±0.0028). Total effect of toothbrush wear simulation cycles; irrespective of material, totally toothbrush wear simulation cycles did not affect roughness significantly (p=0.8281 > 0.05) difference between all materials where (18 m ≥ baseline ≥ 6 m ≥24 m ≥ 12 m). Conclusions: Brushing of ceramic materials with conventional dentifrices non-significantly increased surface roughness, where results of surface roughness present within the clinically acceptable range, not insult the patient intraorally. | ||||
|
Statistics Article View: 257 PDF Download: 561 |
||||
