Effect of hesperidin on antibacterial activity and adhesive properti es of an etch-and-rinse adhesive system | ||||
| Egyptian Dental Journal | ||||
| Article 28, Volume 64, Issue 4 - October (Fixed Prosthodontics, Dental Materials, Conservative Dentistry & Endodontics), October 2018, Page 3801-3812 PDF (971.94 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/edj.2018.79355 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Sayed Ghorab1; Ashraf Ibraheim2 | ||||
| 1Lecturer, Dental Biomaterials Department, Faculty of Dentistry, Mansoura University, Egypt | ||||
| 2Lecturer, Department of Operative, Faculty of Dentistry, Mansoura University, Egypt | ||||
| Abstract | ||||
| Objectives: To evaluate the antimicrobial activity and adhesive properties of a simplified totaletch adhesive system containing different proportions of Hesperidin (HPN). Materials and Methods: Hesperidin was added to dental adhesive in three different ratios producing four experimental adhesive groups (0 [control], 0.2, 0.5, and 1%). The antibacterial activity of the prepared adhesive groups was studied using agar disc-diffusion test against Streptococcus mutans. The viscosity of dental adhesives was evaluated using a cone and plate viscometer. Microtensile bond strength was tested immediately and after thermocycling. The fracture patterns were examined using a stereomicroscope. Data were statistically analyzed using ANOVA and Tukey HSD tests (α = 0.05). Results: The antimicrobial activity of HPN-incorporated experimental adhesives exhibited a significant inhibitory effect against Streptococcus mutans compared with the control (P < 0.05). The viscosity of the experimental adhesives increased with increasing the concentrations of HPN incorporation into the adhesive. The incorporation of 0.2 wt% and 0.5 wt% HPN into the dental adhesive significantly increased the immediate μTBS (P < 0.05). However, experimental adhesives incorporating 1 wt% HPN showed no significant differences in the μTBS values compared with the unmodified adhesive resin (P > 0.05). After thermocycling, all studied adhesive groups revealed significant reduction in μTBS (p < 0.001). Conclusions: 0.5 wt% HPN incorporated dental adhesives could achieve a promising antibacterial effect without adversely affect the adhesive characteristics; however, thermocycling significantly reduced the μTBS. | ||||
| Keywords | ||||
| Antibacterial activity; Hesperidin; microtensile bond strength; viscosity | ||||
|
Statistics Article View: 140 PDF Download: 274 |
||||
