Effect of ASP Chemical Flooding Efficiency On Displacement Factor and Water Percentage After Exhaustion of Water Flooding Efficiency in DERO Field | ||||
Journal of Petroleum and Mining Engineering | ||||
Article 8, Volume 21, Issue 1, December 2019, Page 72-81 PDF (813.5 K) | ||||
Document Type: Original Article | ||||
DOI: 10.21608/jpme.2020.79303 | ||||
View on SCiNiTO | ||||
Author | ||||
Mosab Albredi* | ||||
Alfurat University- Faculty Of Petrochemical Engineering - Syria | ||||
Abstract | ||||
In this research a laboratory study of ASP flooding process followed by polymer solution (for mobility control) were performed in industrial core consist of marble, physical simulated the reservoir properties of productive Jreebi formation in DERO field. From my precedent studies: I found the types and optimum concentrations of ASP components that achieve maximum efficiency at minimum concentration (minimum interfacial tension for surfactant and alkaline - maximum viscosity for polymer). these types and optimum concentrations is NaOH 0.7%wt, DDBSCa (Wetconat1220EH) 0.05%wt and Xanthan Gum 550 PPM. ASP flooding processes were performed by the following volumetric ratios: 15-30-50 %PV followed by 15% PV of polymer solution (for mobility control) . Finally displacement liquid were injected up to 250%PV. All ASP flooding processes were performed in the formation conditions of DERO field. Results of the laboratory study referred to increasing of oil producing and decline of produced water at all ratios of ASP solution | ||||
Keywords | ||||
ASP Flooding; Sweep Efficiency; Oil Recovery Factor Water flooded; Displacement | ||||
Statistics Article View: 195 PDF Download: 274 |
||||