COLOR STABILITY AND SURFACE ROUGHNESS OF AN ORGANICALLY MODIFIED CERAMIC (ORMOCER) AND A METHACRYLATE BASED COMPOSITE RESINS (AN IN-VITRO STUDY)
Sherif, R., Abd El-Fattah, W., Afifi, R. (2020). COLOR STABILITY AND SURFACE ROUGHNESS OF AN ORGANICALLY MODIFIED CERAMIC (ORMOCER) AND A METHACRYLATE BASED COMPOSITE RESINS (AN IN-VITRO STUDY). EKB Journal Management System, 45(1), 100-105. doi: 10.21608/adjalexu.2020.79967
Ramy M. Sherif; Wegdan M. Abd El-Fattah; Rania R. Afifi. "COLOR STABILITY AND SURFACE ROUGHNESS OF AN ORGANICALLY MODIFIED CERAMIC (ORMOCER) AND A METHACRYLATE BASED COMPOSITE RESINS (AN IN-VITRO STUDY)". EKB Journal Management System, 45, 1, 2020, 100-105. doi: 10.21608/adjalexu.2020.79967
Sherif, R., Abd El-Fattah, W., Afifi, R. (2020). 'COLOR STABILITY AND SURFACE ROUGHNESS OF AN ORGANICALLY MODIFIED CERAMIC (ORMOCER) AND A METHACRYLATE BASED COMPOSITE RESINS (AN IN-VITRO STUDY)', EKB Journal Management System, 45(1), pp. 100-105. doi: 10.21608/adjalexu.2020.79967
Sherif, R., Abd El-Fattah, W., Afifi, R. COLOR STABILITY AND SURFACE ROUGHNESS OF AN ORGANICALLY MODIFIED CERAMIC (ORMOCER) AND A METHACRYLATE BASED COMPOSITE RESINS (AN IN-VITRO STUDY). EKB Journal Management System, 2020; 45(1): 100-105. doi: 10.21608/adjalexu.2020.79967

COLOR STABILITY AND SURFACE ROUGHNESS OF AN ORGANICALLY MODIFIED CERAMIC (ORMOCER) AND A METHACRYLATE BASED COMPOSITE RESINS (AN IN-VITRO STUDY)

Alexandria Dental Journal
Article 17, Volume 45, Issue 1, April 2020, Page 100-105  XML PDF (366.63 K)
Document Type: Original Article
DOI: 10.21608/adjalexu.2020.79967
View on SCiNiTO View on SCiNiTO
Authors
Ramy M. Sherif email 1; Wegdan M. Abd El-Fattah2; Rania R. Afifi3
11BDS, Faculty of Dentistry, 6th October University.
2Professor of Conservative Dentistry, Faculty of Dentistry, Alexandria University.
3Lecturer of Conservative Dentistry, Faculty of Dentistry, Alexandria University.
Abstract
Introduction: Any esthetic restorative material largely depends on the color match and the color stability of the material in long term use. Also the smooth surface appear to be critical for composite performance and it's aesthetic outcome. However resin composites are materials that can show color changing when exposed to staining media.
Objectives: The aim of this invitro study is to evaluate the color stability, change in opacity and change in surface roughness of an ORMOCER, and two methacrylate based composites after being immersed in different staining solutions with different time intervals.
Materials and methods: A total of one hundred twenty disc specimens (10mm in diameter and 2mm in thickness) were prepared from three composite resins, A bulk fill ORMOCER based (Admira fusion X-tra) and a bulk fill methacrylate based (X-tra fill) and an incremental fill methacrylate based (Esthet-X HD) composite resins (n = 40). Specimens of each type were divided in to four groups according to immersion solutions (n = 10). Group A= Specimens were immersed in coffee (Nescafe classic, Nestle, Egypt), Group B= Specimen were immersed in tea (Lipton yellow lable, Unilever brand, Egypt), Group C = Specimen were immersed in cola (Coca cola company, Egypt) and Group D= Specimen were immersed in distilled water as a control group. Color evaluation was done at base line before staining and then at periods of 7 days, 14 days, 28 days using spectrophotometer. Change in color (∆E*) and opacity (∆Op) were obtained using the CIE L*a*b* system. Surface roughness was evaluated using Atomic Force microscopy at baseline before staining and then at 28 days from immersion in staining solutions.
Results:All composite used showed change in color values at the end of the time intervals after 28 days of immersion in staining solutions. Group A (coffee) was the highest effecting group (ΔE >3.3) and Admira fusion X tra was the material with the highest change in color. Surface roughness also increased especially in group C (cola) for all materials after 28 days with no statistically significant difference between groups (p>0.05).
Conclusions: Coffee has a higher effect on staining composite resin than tea and cola. While cola affected the surface roughness of the composite resins used  more than the other solution used.
Keywords
Color change; Surface roughness; ORMOCR; Atomic force microscopy
References
  1. Barutcigil Ç, Yıldız M. Intrinsic and extrinsic discoloration of dimethacrylate and silorane based composites. J Dent. 2012;40(Suppl 1):e57-63.
  2. Madhysatha PS, Naik DG, Kotian R, Srikant N, Bhat KMR. Effect of staining solutions on color stability of silorane & Methacrylate Restorative Material. Int J Biomed Sci. 2015;11:29-34.
  3. Uzay KV, Ismail B, Pinar A. Color stability of bulk fill and incremental fill resin-based composites polished with aluminum-oxide impregnated disks. Restor Dent Endod. 2017;42:118-24.
  4. Fontes ST, Fernández MR, de Moura CM, Meireles SS. Color stability of a nanofill composite: effect of different immersion media. J Appl Oral Sci. 2009;17:388-91.
  5. Cleidiel AA L, Silvio J, Paulo H, André LF, Ticiane CF. Influence of Mechanical and Chemical Degradation in the Surface Roughness, Gloss, and Color of Microhybrid Composites. J Contemp Dent Pract. 2017;18:283-8.
  6. Veena SN, Shan S, Prabeesh P, Unu S, Rajesh P. Three dimensional evaluation of surface roughness of resin composites after finishing and polishing. J Conserv Dent. 2016;19:91-5.
  7. Manhart J, Hickel R Bulk-fill-composites. Modern application technique of direct composites for posterior teeth. Swiss Dent J. 2014;124:19-37
  8. Poggio C, Ceci M, Beltrami R, Mirando M, Wassim J, Colombo M. Color stability of esthetic materials: aspectrophotometric analysis. Acta Biomater Odontol Scand. 2016;2: 95-101.
  9. Bacchi A, Feitosa VP, da Silva Fonseca AS, Cavalcante LM, Silikas N, Schneider LF. Shrinkage, stress, and modulus of dimethacrylate, ormocer, and silorane composites. J Conserv Dent. 2015;18:384-8.
  10. Seda CG, Emir YS, Neslin V, Gaye S.Color stability and surface roughness of a laboratory-processed composite resin as a function of mouthrinse. J Esthet Restor Dent. 2015;27:314-21.
  11. Meena KC, Manohar BK, Rahul Bansal AH. Evaluation of surface roughness of different restorative composites after polishing using atomic force microscopy. J Conserv Dent. 2016;19:56-62.
  12. Koc-Vural U, Baltacioglu I, Altinci P. Color stability of bulk-fill and incremental-fill resin based composites polished with aluminum-oxide impregnated disks. Restor Dent Endod. 2017;42:118-24.
  13. Arocha MA, Mayoral JR, Lefever D, Mercade M, Basilio J, Roig M. Color stability of siloranes versus methacrylatebased composites after immersion in staining solutions. Clin Oral Investig. 2013;17:1481-7.
  14. Ardu S, Braut V, Gutemberg D, Krejci I, Dietschi D, Feilzer AJ. A long-term laboratory test on staining susceptibility of esthetic composite resin materials. Quintessence Int 2010;41:695-702.
  15. Maria MP, Razvan G, Laura I, Ugarte A, Rosa P, Rade D. Color and translucency in siloran-based resin composite compared to universal and nanofilled composites. J Dent. 2010;38:110-116.
  16. Archegas LR, Freire A, Vieira S, Caldas DB, Souza EM. Colour stability and opacity of resin cements and flowable composites for ceramic veneer luting after accelerated ageing. J Dent. 2011;39:804-10.
  17. Dias HB, Carrera ET, de Souza Rastelli AN. The influence of pH and chemical composition of beverages on color stability of a nanofilled composite resin. Gen Dent. 2016;64:e21-7.
  18. Barutcigil Ç, Barutcigil K, €Ozarslan MM, D€undar A, Yilmaz B. Color of bulk-fill composite resin restorative materials. J Esthet Restor Dent. 2018;30:E3-8.
  19. Lee YK, Powers JM. Discoloration of dental resins composites after immersion in a series of organic and chemical solutions. J Biomed Mater Res B App Biomater. 2005;73:361-7.
  20. Poggio C, Beltrami R, Scribante A, Colombo M, Chiesa M. Surface discoloration of composite resins: effects of staining and bleaching. Dent Res J. 2012;9:567-73.
  21. Bayindir F, Kürklü D, Yanikoğlu ND. The effect of staining solutions on the color stability of provisional prosthodontic materials. J Dent. 2012;40:e41-6.
  22. Ertaş E, Güler AU, Yücel AC, Köprülü H, Güler E. Color Stability of Resin Composites after Immersion in Different Drinks. Dent Mater J. 2006;25:371-6.
  23. Sideridou ID, Karabela MM. Sorption of water, ethanol or ethanol/ water solutions by light-cured dental dimethacrylate resins. Dent Mater. 2011;27:1003-10.
  24. Sideridou I, Tserki V, Papanastasiou G. Study of water sorption, solubility and modulus of elasticity of light-cured dimethacrylate-based dental resins. Biomaterials. 2003;24:655-65.
  25. Bacchi A, Feitosa VP, da Silva Fonseca AS, Cavalcante LM, Silikas N, Schneider LF. Shrinkage, stress, and modulus of dimethacrylate, ormocer, and silorane composites. J Conserv Dent. 2015;18:384-87.
  26. Gregor L, Krejci I, Di Bella E, Feilzer AJ, Ardu S. Silorane, ormocer, methacrylate and compomer longterm staining susceptibility using ΔE and ΔE 00 colourdifference formulas. Odontology 2016;104:305-9.
  27. Llena C, Fernandez S, Forner L. Color stability of nanohybrid resinbased composites, ormocers and compomers. Clin Oral Invest. 2017;21:1071-7.
  28. Alexandre LSB, Anna KFC, Guilherme SFA, Paula CP, Alessandra B, Sigmar M. Color stability of composites: effect of immersion media. Acta Odontol Latinoam. 2011; 24:193-9.
  29. Ceci M, Viola M, Rattalino D, Beltrami R, Colombo M, Poggio C. Discoloration of different esthetic restorative materials: A spectrophotometric evaluation. Eur J Dent. 2017;11:149-56.
  30. Mundim FM, Garcia Lda F, Pires‑de‑Souza Fde C. Effect of staining solutions and repolishing on color stability of direct composites. J Appl Oral Sci. 2010;18:249-54.
  31. Silva TMD, Sales ALLS, Pucci CR, Borges AB, Torres CRG. The combined effect of food-simulating solutions, brushing and staining on color stability of composite resins. Acta Biomaterialia Odontologica Scandinavica 2017;3:1-7.
  32. Macedo MGFP, Volpato CAM, Henriques BAPC, Vaz PCS, Silva FS, Silva CFCL. Color stability of a bis-acryl composite resin subjected to polishing, thermocycling, intercalated baths, and immersion in different beverages. J Esthet Restor Dent. 2018;30:449-56.
  33. Somayaji SK, Amalan A, Ginjupalli K. Effect of Different Acidic Beverages on Microhardness of Nanohybrid Composite, Giomer, and Microhybrid Composite. World J Dent. 2016;7:126-8.
  34. Tanthanuch S, Kukiattrakoon B, Siriporananon C, Ornprasert N, Mettasitthikorn W1, Likhitpreeda S, et al. The effect of different beverages on surface hardness of nanohybrid resin composite and giomer. J Conserv Dent. 2014;17:261-5.
  35. Tantanuch S, Kukiattrakoon B, Peerasukprasert T, Chanmanee N, Chaisomboonphun P, Rodklai A. Surface roughness and erosion of nanohybrid and nanofilled resin composites after immersion in red and white wine. J Conserv Dent. 2016;19:51-5.
  36. Wongkhantee S, Patanapiradej V, Maneenut C, Tantbirojn D. Effect of acidic food and drinks on surface hardness of enamel, dentine, and tooth-coloured filling materials. J Dent. 2006;34:214-20.
  37. Dos Santos PA, Garcia PP, De Oliveira AL, Chinelatti MA, Palma‑Dibb RG. Chemical and morphological features of dental composite resin: Influence of light curing units and immersion media. Microsc Res Tech. 2010;73:176-81.
  38. Erdemir U, Yildiz E, Eren MM, Ozel S. Surface hardness of different restorative materials after long-term immersion in sports and energy drinks. Dent Mater J. 2012;31:729-36.
  39. Aliping-Mckenzie M, Linden RWA, Nicholson JW. The effect of Coca-Cola and fruit juices on the surface hardness of glass-ionomers and compomers. J Oral Rehabil. 2004;31:1046-52.
  40. da Silva MA, Fardin A, de Vasconcellos RC, Santos Lde M, Tonholo J,da Silva JG Jr, et al. Analysis of roughness and surface hardness of a dental composite using atomic force microscopy and microhardness testing. Microsc Microanal. 2011;17:446-51. 
Statistics
Article View: 711
PDF Download: 1,200