Effect of Thermo-Mechanical Aging on The Marginal Fit of Two Types of Monolithic Zirconia Crowns With Two Finish Line Designs
Haggag, K., Abbas, M., Ramadan, H. (2018). Effect of Thermo-Mechanical Aging on The Marginal Fit of Two Types of Monolithic Zirconia Crowns With Two Finish Line Designs. EKB Journal Management System, 5(1), 121-128. doi: 10.21608/adjg.2018.7999
Khaled Haggag; Muhammad Abbas; Hussein Ramadan. "Effect of Thermo-Mechanical Aging on The Marginal Fit of Two Types of Monolithic Zirconia Crowns With Two Finish Line Designs". EKB Journal Management System, 5, 1, 2018, 121-128. doi: 10.21608/adjg.2018.7999
Haggag, K., Abbas, M., Ramadan, H. (2018). 'Effect of Thermo-Mechanical Aging on The Marginal Fit of Two Types of Monolithic Zirconia Crowns With Two Finish Line Designs', EKB Journal Management System, 5(1), pp. 121-128. doi: 10.21608/adjg.2018.7999
Haggag, K., Abbas, M., Ramadan, H. Effect of Thermo-Mechanical Aging on The Marginal Fit of Two Types of Monolithic Zirconia Crowns With Two Finish Line Designs. EKB Journal Management System, 2018; 5(1): 121-128. doi: 10.21608/adjg.2018.7999

Effect of Thermo-Mechanical Aging on The Marginal Fit of Two Types of Monolithic Zirconia Crowns With Two Finish Line Designs

Al-Azhar Dental Journal for Girls
Article 14, Volume 5, Issue 1, January 2018, Page 121-128  XML PDF (2.38 MB)
Document Type: Original Article
DOI: 10.21608/adjg.2018.7999
View on SCiNiTO View on SCiNiTO
Authors
Khaled Haggag1; Muhammad Abbas2; Hussein Ramadan3
1Assistant Professor, Crowns and Bridges Department, Faculty of Dental Medicine, Al Azhar University, Egypt
2Assistant Professor, Dental Biomaterials Department, Faculty of Dental medicine, Al-Azhar University, Egypt
3Lecturer,Crowns and Bridges Department,Faculty of Dental Medicine, Al Azhar University, Egypt
Abstract
 
OBJECTIVES: The purpose of this study was to compare the marginal fit of two CAD/CAM monolithic zirconia crowns with two finish line designs after thermo-mechanical aging. MATERIALS AND METHODS: A total of 20 zirconia crowns were divided into two groups Bruxzir and Prettau zirconia (n=10). Each type of zirconia
crowns was divided into two groups according to the finish line design chisel (CH) and deep chamfer (DC) groups (n=5) After cementation of crowns to their corresponding
dies, the vertical marginal gap was measured then the all crowns of both groups were subjected to thermo-mechanical aging then the vertical marginal gap was measured again. RESULTS: Statistical analysis showed that. The thermo-mechanical aging significantly increased the vertical marginal gap where DC non-aged Bruxzir recording the lowest mean value (31.41±5.9) and the CH aged Bruxzir recorded the highest mean value (95.28±9.2) as indicated by three-way ANOVA test (F= 23.0741,
p=<0.0001<0.05). CONCLUSIONS: Thermo-mechanical aging significantly increased
the vertical Marginal gap and the deep chamfer finish line preparation is preferred
for construction of monolithic zirconia crowns.
Keywords
Thermo-Mechanical; Marginal fit; Zirconia Crowns
Statistics
Article View: 426
PDF Download: 646