The impact of ammonium sulfate and citric acid concentration in print Paste on burn-out degree with Cotton/Polyester fabrics.
Abd El-Salam, S., Al-Gamal, G., Abo El-Maaty, M. (2020). The impact of ammonium sulfate and citric acid concentration in print Paste on burn-out degree with Cotton/Polyester fabrics.. EKB Journal Management System, 10(1), 21-31. doi: 10.21608/idj.2020.81287
Sherif Abd El-Salam; Gehan Al-Gamal; Mai Abo El-Maaty. "The impact of ammonium sulfate and citric acid concentration in print Paste on burn-out degree with Cotton/Polyester fabrics.". EKB Journal Management System, 10, 1, 2020, 21-31. doi: 10.21608/idj.2020.81287
Abd El-Salam, S., Al-Gamal, G., Abo El-Maaty, M. (2020). 'The impact of ammonium sulfate and citric acid concentration in print Paste on burn-out degree with Cotton/Polyester fabrics.', EKB Journal Management System, 10(1), pp. 21-31. doi: 10.21608/idj.2020.81287
Abd El-Salam, S., Al-Gamal, G., Abo El-Maaty, M. The impact of ammonium sulfate and citric acid concentration in print Paste on burn-out degree with Cotton/Polyester fabrics.. EKB Journal Management System, 2020; 10(1): 21-31. doi: 10.21608/idj.2020.81287

The impact of ammonium sulfate and citric acid concentration in print Paste on burn-out degree with Cotton/Polyester fabrics.

International Design Journal
Article 1, Volume 10, Issue 1, January 2020, Page 21-31  XML PDF (1.27 MB)
Document Type: Original Article
DOI: 10.21608/idj.2020.81287
View on SCiNiTO View on SCiNiTO
Authors
Sherif Abd El-Salam1; Gehan Al-Gamal2; Mai Abo El-Maaty3
1Professor of Print Technology Fabrics, Vice Dean for Students and Education, Faculty of Applied Arts - Helwan University
2Professor of Print Design Ladies Fabrics, Head of textile printing, dyeing and finishing department, Faculty of Applied Arts, Damietta University
3Textile printing, dyeing and finishing engineer, Faculty of Applied Arts – Damietta University
Abstract
The last years of the 20th century have seen real changes and rapid developments in all areas of life, and modern techniques in the field of textile printing have emerged, occupying the first positions in strategic fields. Therefore, this research aims to study the effect of using different concentrations of ammonium sulfate and citric acid in the print paste on the burn-out rate produced on Cotton/polyester blended fabrics in terms of weight loss, tensile strength and elongation to reach the best concentrations that can be used during the burn-out  printing process and using it to print ladies' clothing fabrics as one of the most important areas for textile printing designers, as burning printing offers the clothes a unique value that helped to change the course of fashion through the presentation of texture, shape, and appropriateness that The designers dreamed of it. Fabrics used is cotton 100%, polyester 100%, cotton/polyester 35/65, cotton/polyester 50/50, printed in silk screen Research problem: The search problem can be identified in the following question: What are the effect changes resulting from the use of different concentrations of ammonium sulphate and citric acid in the burn-out printing paste and how are they used to produce different texture effects for the production of ladies printed fabrics? Objectives: Study the effect of different concentrations of ammonium sulfate and citric acid in the printing paste on the weight loss ratio of cotton/polyester fabrics and Study the effect of different concentrations of ammonium sulfate and citric acid in the printing paste on the tensile strength and elongation of cotton/polyester fabrics.Significance: Identify the method of burn-out printing as one of the modern methods of printing textiles. Identify the best concentrations that can be used to effect burn-out printing on cotton/poly-esters fabrics. Take advantage of the effect of burning printing in enriching the design of ladies printing fabrics with modern technological thinking and design construction that goes hand in hand with the latest international fashion lines to meet the demands of the consumer. Methodology:  The research follows the analytical and experimental descriptive approach by: Analytical descriptive approach: study the effect of the concentrations of ammonium sulphate and citric acid in the burning paste on the characteristics and properties of the printed fabrics. Experimental approach: on the practical side of the experiment using different concentrations of ammonium sulphate and citric acid in the burning paste and use it to print women's fabrics. Results: it was found that: There is a direct correlation between the increase in the rate of burn-out Chemicals in the print paste and the resulting burn-out rate (weight loss). There is a direct correlation between the proportion of cotton in the material to be printed and the resulting burn-out rate. There is an inverse relationship between the concentration of the burn-out Chemicals ratio in the printing paste and the degree of tensile strength and longing of the material.  The burn rate resulting from the use of ammonium sulfate is better than the burn rate produced by citric acid. The best concentration for ammonium sulfate is 35g/kg. The best concentration of citric acid is 30g/kg
Keywords
الطباعة بالحرق; Burn-Out Printing; الأقمشة المخلوطة; Blend Fibers; کبريتات الأمونيوم; Ammonium sulfate; حمض الستريک; Citric acid
References
  1. الشال ، عبد الغنی النبوی(1980م) ،" مصطلحات فی الفن والتربیة الفنیة"،مطابع جامعة الملک سعود ، الریاض.
  2. حجاج ، حسین محمد - حسین ، مصطفی محمد - جودة ، عبد العزیز(1993م )،"تصمیم طباعة المنسوجات  الیدویة" ، مؤسسة دار التعاون للطباعة والنشر ، القاهرة .
  3. أحمد ، منال عزیز إبراهیم أحمد (2013م) ،" فاعلیة برنامج مقترح لتنمیة الجانب الجمالی لملابس السیدات الخارجیة بإستخدام الحاسب الألی" ،رسالة ماجستیر ، کلیة التربیة النوعیة ، جامعة المنصورة.
  4. السید ، ریهام عبد الباسط (2004م)،" نظم فصل وإدارة الألوان وتطبیقاتها فی تصمیم أقمشة ملابس  السیدات"،رسالة ماجستیر ،کلیة الفنون التطبیقیة، جامعة حلوان.
  5. عبد الحمید ، حاتم محمد (2004م) ،"دور الخط العربی فی إثراء التصمیمات الطباعیة للمعلقات الحائطیة والإفادة منها فی إعداد معلم التربیة الفنیة" ، رسالة ماجستیر ، کلیة التربیة النوعیة بدمیاط ، جامعة المنصورة .
  6. عبد الرؤف ، نشوی (2003م )،" تأثیربعض التراکیب البنائیة للأقمشة السیلیلوزیة والمعالجات الأولیة والتجهیز علی بعض خواصها الوظیفیة وقابلیتها للتنظیف"، رسالة دکتوراة، کلیة الأقتصاد المنزلی، جامعة المنوفیة.
  7. عبدالعظیم ، جیهان إبراهیم فوزی (2007م) ،" تصمیم بعض أجزاء الملبس الحریمی الملائمة لنمط الوجه والرقبة "، رسالة ماجستیر ، کلیة التربیة النوعیة ،جامعة المنصورة.
  8. مجاهد ، عبیر کمال محمد (2001م)، "جمالیات الشکل التجریدی وعلاقته بالغرض الوظیفی فی تصمیم طباعة المنسوجات "، رسالة ماجستیر ، کلیة الفنون التطبیقیة ، جامعة حلوان.
    1. S., Margo (2007). "Textile Surface Decoration: Silk and Velvet", University of Pennsylvania Press.
    2. https://www.arabsciencepedia.org 17/1/2019 11am
    3. https://www.scribd.com/document/72495340/Tech3-Sec1-Operation17/1/2019 11:14am
    4. https://en.wikipedia.org/wiki/Ammonium_sulfate17/1/2019 11am
    5. https://en.wikipedia.org/wiki/Citric_acid17/1/2019 11:10am                
 

Statistics
Article View: 411
PDF Download: 795