Development of the Weaving Mechanism for the Pleated Fabrics
Badawi, S. (2020). Development of the Weaving Mechanism for the Pleated Fabrics. EKB Journal Management System, 10(1), 265-274. doi: 10.21608/idj.2020.81528
Said Badawi. "Development of the Weaving Mechanism for the Pleated Fabrics". EKB Journal Management System, 10, 1, 2020, 265-274. doi: 10.21608/idj.2020.81528
Badawi, S. (2020). 'Development of the Weaving Mechanism for the Pleated Fabrics', EKB Journal Management System, 10(1), pp. 265-274. doi: 10.21608/idj.2020.81528
Badawi, S. Development of the Weaving Mechanism for the Pleated Fabrics. EKB Journal Management System, 2020; 10(1): 265-274. doi: 10.21608/idj.2020.81528

Development of the Weaving Mechanism for the Pleated Fabrics

International Design Journal
Article 22, Volume 10, Issue 1, January 2020, Page 265-274  XML PDF (728.92 K)
Document Type: Original Article
DOI: 10.21608/idj.2020.81528
View on SCiNiTO View on SCiNiTO
Author
Said Badawi
Associate Professor of Weaving Technology at the Dept. of Textiles at the Faculty of Applied Arts, Helwan University, Cairo (Egypt).
Abstract
Pleated fabrics represent one of the most important 3D-fabrics. They contain the wrinkles effect in the longitudinal or cross-direction or in the diagonal direction, and are formed as folds. These folds or pleats are laid at 90° up to the ground fabric. This type of woven structures is called also folded fabrics or Plissé. Their production methods are enclosed in three methods till nowadays, which are weaving, synthetic resin equipment and sewing. In the weaving method, only wrinkles effect in the longitudinal direction could be woven. On the other hand, this effect and the others could be achieved by the different production methods which are mentioned before. The main goal of this paper is development of some mechanical devices on the weaving machine. Through which, the performances of the woven pleated fabrics could be enhanced. The development´s procedures have to secure the high quality of the woven pleated fabrics. Dimension stability, balanced structure and manufacturing economics are the desiredcharacteristics of the research. These performances are difficult to be carried out by actual traditional weaving machines. From a practical point of view, it was found that these performances couldn’t be achieved by the other production methods in spite of their additional operations after weaving. The development of the weaving machine enclosed in control of the warp tension in the distance between let-off device and the healds and also control of the movement of the take-up device. These developed operations have to be controlled by control-system program which has to be built in according to constants of the weaving machine.
Keywords
Weaving mechanism Pleated fabrics Plissés; 3D-fabrics Synthetic resin equipment Wrinkles Control device Programing system Servo-motor
References
  1. Zurcapellen, T. M.: 2001 Lexikon der Gewebe. Frankfurt am Main, Germany: Dt. Fachverl.,. – ISBN 3-87150-725-3      
  2. Badawi, S. : 2008 Development of the Weaving Machine and 3D Woven Spacer Fabric Structures for Lightweight Composites Materials. Germany: Vdm Verlag Dr. Müller,. –ISBN 3-639-04114-3.
  3. Kirchenberger, H.: 1984Florwaren Frottierwaren, Samt und Plüsch, Teppiche und Bodenbeläge. Wien-Perchtoldsdorf: Bondi,. ISBN 3-900008-08-6
  4. Down, J.:   1999 Textile Technology. UK: Oxford Uni. Press,. –ISBN 0-19-832813-1
  5. Kienbaum, M.: 1996Bindungstechnik der Gewebe, Bd.3, Drehergewebe, Faltengewebe, Florgewebe und Jacquardgewebe. Berlin: Schiele & Schön,. ISBN 3-794-90607-1
  6. Hennig, H.: 1968 Gewebetechnik. Leipzig, Germany: VEB Fachbuchverlag,.
  7. Han-Yong Jeon:   2012 Woven Fabrics. UK: IntechOpen Limited,. –ISBN 9-53-510607-4
Statistics
Article View: 254
PDF Download: 354