Environmentally friendly technology using self-printing paste
ElGamal, R., Osman, S., Ibrahim, J., Rakha, I. (2020). Environmentally friendly technology using self-printing paste. EKB Journal Management System, 10(1), 331-338. doi: 10.21608/idj.2020.81721
Rania ElGamal; Sohair Osman; Jackeline Ibrahim; Ibrahim Rakha. "Environmentally friendly technology using self-printing paste". EKB Journal Management System, 10, 1, 2020, 331-338. doi: 10.21608/idj.2020.81721
ElGamal, R., Osman, S., Ibrahim, J., Rakha, I. (2020). 'Environmentally friendly technology using self-printing paste', EKB Journal Management System, 10(1), pp. 331-338. doi: 10.21608/idj.2020.81721
ElGamal, R., Osman, S., Ibrahim, J., Rakha, I. Environmentally friendly technology using self-printing paste. EKB Journal Management System, 2020; 10(1): 331-338. doi: 10.21608/idj.2020.81721

Environmentally friendly technology using self-printing paste

International Design Journal
Article 27, Volume 10, Issue 1, January 2020, Page 331-338  XML PDF (436.89 K)
Document Type: Original Article
DOI: 10.21608/idj.2020.81721
View on SCiNiTO View on SCiNiTO
Authors
Rania ElGamal1; Sohair Osman2; Jackeline Ibrahim3; Ibrahim Rakha4
1Assistant Lecturer, Faculty of Applied Arts, October 6th University
2Professor of Textile Printing Design- Faculty of Applied Arts- Helwan University
3Assistant Professor of Textile Printing Design- Faculty of Applied Arts- Helwan University
4Consultant Psychiatrist- National Health Service- UK
Abstract
The purpose of this experiment is to test the effect of sodium hydroxide solution on Lucina plant seeds. Using different concentration of sodium hydroxide with crushed Lucina plants seeds, as well as printing pastes containing eco-friendly galactomannan gum and natural dye were isolated in containers. Investigations were carried on the rheological properties of each. Screen printing and burn-out style methods testing was also used to evaluate the efficiency of the obtained pastes. The test was conducted by printing on five different blends and pure wool. The results were concluded by calculating the percentage loss regarding weight, K/S of the colored area and tensile strength of the printed area. The results showed that all the pastes were categorized by non-Newtonian pseudo-plastic behavior . During simultaneous use, the pastes were successful printed by screen-printing and burn-out style methods. By increasing the sodium hydroxide concentration and/or the portion of wool in the material blend, the percentage loss in weight as well as tensile strength increases. The K/S of the printed area was determined by the nature of the component of the blend and was ordinarily higher on protein fabrics than cellulosic. Unique colors and attractive textures could be established by this technique. The higher the concentration of sodium hydroxide, causing % loss in tensile strength increases specially for woolen blends.  To conclude, this eco-friendly technology has proven to be effective; energy and cost efficient; and with minimum harmful waste.
Keywords
التکنولوجيا الصديقه للبيئه; Eco-Friendly Technology; معجون الطباعه الذاتي; Self-Printing Paste; جلاکتومانان; Galactomannan; صبغات طبيعية; Natural Dye
References
  1. Smith,Sue Wagner, (Ciba-Geigy);Am.Dyestuff Reporter.(9),32 (1991).
  2. R.Buchanan:Text.Chem&Coiourists.,27,11 (1995)
  3. F.Bayyerlein; Textilveredlung, 24(9),315 (1989)
  4. M.L.Gulrajaini,D.B.Gupta,V.agarwai and M.Jain;The Indian Text.J.  50(4)1025 (1992).
  5. R.B.Chavan; Colourrage;42 (4),27 (1995)
  6. El-Hennawi H.M., Mahmoud, S.A. and Ragheb, A.A., 2017. Eco-friendly coloration of silk and flax fabrics with natural dye enhanced by ultraviolet radiation. Egyptian Pharmaceutical Journal, 16(3), p.192.
  7. Gibson, S., 2015. Animal, Vegetable, Mineral?: How eighteenth-century science disrupted the natural order. OUP Oxford.
  8. Grgac, S.F., Višić, K., Sutlović, A. and Strmo, I., 2016, January. INVESTIGATING POSSIBILITIES OF APPLYING ENVROMENTALLY-FRIENDLY FLAME RETARDANT AGENT IN THE PROCESS OF TEXTILE PRINTING. In 16th World Textile Conference AUTEX 2016.
  9. Hebeish, A., Shahin, A.A., Rekaby, M. and Ragheb, A.A., 2015. New Environment-Friendly Approach for Textile Printing Using Natural Dye Loaded Chitosan Nanoparticles. EGYPTIAN JOURNAL OF CHEMISTRY, 58(6), pp.659-670.
  10. Ibrahim, N.A., Abd El-Aziz, E., Eid, B.M. and AbouElmaaty, T.M., 2016. Single-stage process for bifunctionalization and eco-friendly pigment coloration of cellulosic fabrics. The Journal of The Textile Institute, 107(8), pp.1022-1029.
  11. Manisha, S. and Sandeep, B., 2018. Screen printing of silk fabric with natural dye Arjunaterminelia using cassia tora as eco friendly thickener. International Journal of Basic and Applied Agricultural Research, 16(2), pp.176-179.
  12. Moldovan, S., Ferrandiz, M., Franco, E., Mira, E., Capablanca, L. and Bonet, M., 2017, October. Printing of cotton with eco-friendly, red algal pigment from Gracilaria sp. In IOP Conference Series: Materials Science and Engineering (Vol. 254, No. 19, p. 192011). IOP Publishing.
  13. Savvidis, G., Karanikas, V., Zarkogianni, M., Eleftheriadis, I., Nikolaidis, N. and Tsatsaroni, E., 2017. Screen-printing of cotton with natural pigments: Evaluation of color and fastness properties of the prints. Journal of Natural Fibers, 14(3), pp.326-334.
  14. Shao, J., Zhou, L., Chen, Y., Qi, D. and Liu, J., Zhejiang Sci Tech Univ, 2016. Environmentally-friendly paste discharge agent for textile printing and preparation method thereof. U.S. Patent 9,375,687.
Statistics
Article View: 377
PDF Download: 356