PROCESS CONTROL ON REMOVAL OF IRON FROM INDUSTRIAL WASTEWATER USING ELECTROCHEMICAL TECHNIQUE | ||||
| Journal of Advanced Engineering Trends | ||||
| Article 1, Volume 40, Issue 1, January 2021, Page 1-6 PDF (581 K) | ||||
| DOI: 10.21608/jaet.2021.82177 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Rasha A. Hefny  1; Mohamed Hanafy Mahmoud2; Ali Mohamed Basstawesy1; Omar El-Farouk Abdel-Salam2; Nasser Ali Barakat1
| ||||
| 1Chemical Engineering Department, Faculty of Engineering, Minia University, Egypt | ||||
| 2Chemical Engineering Department, Faculty of Engineering, Cairo University, Egypt | ||||
| Abstract | ||||
| The design of control systems is very important in industry. In this work processcontrol of the proposed electrochemical cell was applied. The results of experiments conducted on the electrochemical cell were taken as the operating data. The parameters affected on the removal process were feed flow rate, feed concentration, and current density. The process control was developed to produce an environmentally acceptable output of iron concentration. The dynamic model and the results of the calculated open and closed loops response curves with the suggested control mode of the electrochemical cell are presented using Matlab. | ||||
| Keywords | ||||
| Dynamic systems; P controller; Feedback control system; Iron removal | ||||
|
Statistics Article View: 333 PDF Download: 492 |
||||
