RETROFITTING DESIGN OF HEAT EXCHANGER NETWORKS USING ASPEN-HYSYS: A CASE STUDY OF CRUDE OIL REFINING PROCESS | ||||
| Journal of Advanced Engineering Trends | ||||
| Article 3, Volume 40, Issue 1, January 2021, Page 15-22 PDF (725.77 K) | ||||
| DOI: 10.21608/jaet.2021.82184 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Mohammed Hussein  1; Elzahid N.M2; Ebrahim Esmail1; Mamdouh Gadalla3; Ibrahim Ashour1
| ||||
| 1Department of Chemical Engineering, Faculty of Engineering, Minia University, Minia 61111, Egypt. | ||||
| 2Department of Chemical Engineering, High Canal Institute for Engineering and Technology, Suez 43713, Egypt. | ||||
| 3Department of Chemical Engineering, Port Said University, Port Said 42523, Egypt Department of Chemical Engineering, The British University, Cairo 11837, Egyp.t | ||||
| Abstract | ||||
| Energy integration is an important request in many chemical industries, particularly in petroleum refinery, because the cost of energy used in operation represents a significant percentage of the total energy. Retrofit of heat exchanger networks (HENs) is a magical solution for energy saving and minimizing external consumption of cold and hot facilities through several mathematical and graphical methods in recent years, but many of these methods are complementary complex and uneconomic. Redesign approach is developed for the existing heat exchanger network using the ASPEN-HYSYS. Simulation of Middle East Petroleum Refinery has been done then, linked to energy analyzer program to make the necessary retrofit which shows reduction of 28.46 (MW) 29.55%, 14.23 (MW) 37.6% and 14.23 (MW) 24.34% in total utilities, hot utility and cold utility, respectively with 29.55% reduction of CO2 emissions. | ||||
| Keywords | ||||
| Oil refinery; Heat exchangers network; Retrofit; Heat recovery | ||||
|
Statistics Article View: 540 PDF Download: 1,292 |
||||
