CHARACTERIZATION AND EVALUATION OF ASPHALT MODIFIED WITH SOME THERMOPLASTIC POLYMERS | ||||
| ERJ. Engineering Research Journal | ||||
| Article 12, Volume 27, Issue 1, January 2004, Page 103-113 PDF (3.02 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/erjm.2004.82617 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| S A. El-Kholy1; E. A. Hassan2; A. M.M. Abd El-Rahman1; I. M. Nassar1 | ||||
| 1Egyptian Petroleum Research Institute( EPRI), Nasr City, Cairo, Egypt. | ||||
| 2Faculty of Science, Al-Azhar University, Nasr City, Cairo, Egypt. | ||||
| Abstract | ||||
| Some commercial thermoplastic polymers such as styrene-butadiene rubber (SBR), polyacrylonitrile (K), polystyrene (PS), polypropylene (PP) and polychloroprene (PC) are used for the modification of two types of asphalt which are: asphalt 60/70 Suez (L) and asphalt 80/100 Alex (H). The best ratio of modifying polymer to be added by hot mixing method at 150-170°C to asphalt, was determined by measuring the values of penetration, softening point, penetration temperature susceptibility (PTS) and penetration index (PI) for the obtained cooled blended formulations. For asphalt (L), such optimum ratio was 6% for (SBR and PP), 9% for (PS) and 12% for (PC), while in case of asphalt (H) the optimum ratio was 6% for (SBR), 9% for (PP and K) and 12% for (PS and PC). Dynamic viscosity tests i.e. shearing in (RV 12) for 5 mins at a high shear rate of 1198.08s? and then for 10 mins at a low shear rate of 149.76s", at different temperatures (30, 40, 50 and 60°C) showed that formulation samples LSBR and HSBR have high yield stress values (To) which give promising indications about the validity of their possible use for pavement. Moreover formulations based on asphalt (H) and modified with SBR gave the highest value of tensile strength as well as thermal stability at 250°C for time period of 150 hours. All the prepared formulations modified with such thermoplastic polymers were resistant to different application media as compared with parent unmodified asphalt. | ||||
| Keywords | ||||
| Asphalt; Asphalt modified; Thermoplastic polymers; Dynamic viscosity | ||||
|
Statistics Article View: 85 PDF Download: 145 |
||||
