Optimization PI Controller Parameters for VSC-HVDC System based on Particle-Swarm-Optimization. | ||||
MEJ- Mansoura Engineering Journal | ||||
Article 6, Volume 42, Issue 2, June 2017, Page 8-14 PDF (716.78 K) | ||||
Document Type: Research Studies | ||||
DOI: 10.21608/bfemu.2020.88881 | ||||
View on SCiNiTO | ||||
Authors | ||||
Eid Abd El Baky Goda1; Ebrahim Ebrahim Mansy2; Ayman Bdrawy Ebrahim 2 | ||||
1Electrical Department, Faculty of Engineering - Mansoura University | ||||
2Electrical Engineering Department, Mansoura University, Egypt | ||||
Abstract | ||||
Nowadays the HVDC systems are considered as basic devices in the new electrical networks because they could solve many problems such as connections of different frequencies regions. Networks stability is the aim of many researchers. They used conventional methods such as PI controllers for this purpose in these methods. The parameters of PI controllers were assumed depending on the operator’s experiences. The authors of this paper optimized the system parameters using Particle Swarm Optimization (PSO). A comparative study between the conventional and optimized systems will be presented. The obtained results show the efficient performance of the designed system | ||||
Keywords | ||||
Optimization; HVDC-VSC; DC-link; PI; PSO. MATLAB, Simulink | ||||
Statistics Article View: 112 PDF Download: 320 |
||||