Ballistic Performance of 155mm VelocityEnhanced Long-Range Artillery Projectile | ||||
| The International Undergraduate Research Conference | ||||
| Article 1, Volume 1, First International Undergraduate Research Conference, IUGRC, 2016, Page 70-70 PDF (442.12 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/iugrc.2016.91017 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Al-Desoky Ezzat Sayed; Ahmed Z. Ibrahim | ||||
| Military Technical College, Egypt. | ||||
| Abstract | ||||
| Many types of 155mm high explosive projectiles are used by a large number of powerful armed forces in the world.Some of these projectiles are of short ranges like that one designated by M107 since its range is approximately 18km. In order to make range extension of these projectiles, the drag acting on them should be decreased. Therefore, many methods have been followed to decrease the drag during projectile flight in air. The improvement of the projectile ballistic shape and adding base bleed unitinstalled to its baseare among the drag reduction methods. Moreover, some projectiles are supplied with small rocket motorimparting the projectile with thrust force rather than decreasing the drag acting on it. In the current study, an analysis is performed to investigate the ballistic performance of a newly developed 155mm Velocity enhanced Long-range Artillery Projectile(VLAP) which is provided with base bleed and rocket assistant units.The internal ballistic solution is obtained using an analytical model. Then, the external ballistic solutionis carried out when the function of the rocket motor and the base bleed are switched on or off. Amaximum range of 41km is obtained when this projectile is fired usinga barrel having a length of39 times the caliber anda maximum range of 55kmis obtained when it is fired from a barrel having a length of 52 times the caliber. | ||||
|
Statistics Article View: 191 PDF Download: 84 |
||||
