DC-DC Converter as a Maximum Power Point Voltage Tracker. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 6, Volume 43, Issue 1, March 2018, Page 1-6 PDF (719.33 K) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.2020.94505 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Ahmed Nori Alshawish* 1; Walaa Ibrahim Gabr2; Saad Saad Eskander3; Salah Ghazy Mohamed2 | ||||
| 1Electrical Engineering, Azzawiya Oil Refining Company, Azzawiya, Libya | ||||
| 2Electrical Engineering, Facility of Engineering, Banha University, Egypt | ||||
| 3Electrical Engineering, Facility of Engineering, Mansoura University, Egypt | ||||
| Abstract | ||||
| In this paper, the maximum power point voltage tracker is designed and operated with the DC variable resistive load. The DC-DC converter technique is used for the design. The designed tracker operates as a DC-DC converter down. The designed tracker is a smart type; this is due to the use of programmed microcomputer to control the tracker circuits. The tracker contains three main circuits, sensing, drive and the power circuit. The designed tracker is constructed suitable to use with the photovoltaic power system (PVPS). The tracker is tested in the laboratory under different load levels at fixed insolation level. | ||||
| Keywords | ||||
| Solar energy; Photovoltaic; Maximum power point tracing | ||||
|
Statistics Article View: 138 PDF Download: 211 |
||||
