Investigation of Using Nano-silica, Silica Fume and Fly Ash in High Strength Concrete

Fahmy, Mohamed Ashraf; Abu El-Hassan, Mohamed Mahmoud; Kamh, Gamal Mohamed; Bashandy, Alaa A.

doi:10.21608/erjm.2020.95144

	Investigation of Using Nano-silica, Silica Fume and Fly Ash in High Strength Concrete
ERJ. Engineering Research Journal
Article 5, Volume 43, Issue 3, July 2020, Page 211-221 PDF (1.18 MB)
Document Type: Original Article
DOI: 10.21608/erjm.2020.95144
View on SCiNiTO
Authors
Mohamed Ashraf Fahmy¹; Mohamed Mahmoud Abu El-Hassan ²; Gamal Mohamed Kamh³; Alaa A. Bashandy ⁴
¹geology department, faculty of science, Menoufia university, menoufia, Egypt.
²Geology Departmet, Faculty of Science, Menoufia University
³Geology Dept. Facultype of Science
⁴Civil Eng. Dep., Faculty of Engineering, Menoufia University, Menoufia, Egypt.
Abstract
Various challenges encountered in the construction industry have led to the production of concrete, with not just high strength, but also with enhanced durability properties. This study investigates the performance and durability of hardened high strength concrete cast using Nano-silica, silica fume and fly ash. Experiments were conducted by substituting cement by weight with Nano-silica, silica fume or fly ash with ratios of 5 %, 10% and 15% and compared to a control mix. The durability performance of the high strength concrete, in terms of water permeability, sulfates resistance, chloride resistance and freeze-thawing tests were tested. This study generally proposes a sustainable solution to produce durable concrete that could have useful application in the construction industry. Based on the results obtained, the hardened properties of concrete improved depending on the type of supplementary cementious materials. Test results showed that Nano-silica has a great influence on concrete properties, but the high dosage show a reverse result.
Keywords
High strength Concrete; Nano-silica; Silica fume; Fly ash


References
[1] T.R. Naik, F.ASCE, 2008, "Sustainability of concrete construction" Practice Periodical on Structural Design and Construction, vol. 13, Issue 2, pp. 98–103. [2] K. L. Scrivener, V. M. John, E. M. Gartner (2016) Eco-efficient cements: potential, economically viable solutions for a low-CO2, cement-based materials industry. Cement Concrete Res 114:2–26. United Nations Environment Program. www.unep.org [3] B. K. K. Bai and M. K. Rao, "Strength and Durability Properties of High Performance Concrete Incorporating Silica Fume and Fly Ash," International Journal of Engineering Sciences and Emerging Technologies "IJESET", vol. 8, no. 1, pp. 23-29, 2015. [4] N. N. Meleka, A. A. Bashandy and M. A. Arab, "Ultra-High Strength Concrete Using Economical Materials," International Journal of Current Engineering and Technology IJCET, vol. 3, no. 2, pp. 393-402, 2013. [5] O. M. A. Daoud and H. S. Sagady, " Production and Properties of High Strength Concrete for Heightening Concrete Dam in Sudan" Int. J. of GEOMATE, June, 2013, Vol. 4, No. 2 (Sl. No. 8), pp. 539-545. Geotec., Const. Mat. & Env., Japan. [6] M. Kumar and Z. Ma, "Mechanical Properties of High-Strength Concrete," 2012 Materials Journal. [7] M. M. Kamal, M. A. Safan, A. A. Bashandy and A. M. Khalil, "Experimental Investigation on the Behavior of Normal Strength and High Strength Self-curing Self-compacting Concrete," Journal of Building Engineering, vol. 16, no. 1, p. 79–93, 2018. [8] M. M. Emad, N. M. Soliman and A. A. Bashandy, "Recycled Aggregate High-Strength Concrete," International Journal of Civil Engineering and Technology "IJCIET" (ISSN 0976-6316), vol. 10, no. 9, pp. 128-146, 2019. [9] A. A. Bashandy, N. M. Soliman and M. H. Abd-Elrahman, "Recycled Aggregate Self-curing High-strength Concrete," Civil Engineering Journal (ISSN 2476-3055), vol. 3, no. 6, pp. 427-441, 2017. [10] M. Mittal, S. Basu and A. Sofi, "Effect of Sika Viscocrete on Properties of Concrete," International Journal of Civil Engineering (IJCE), vol. 2, no. 4, pp. 61-66, 2013. [11] J. J. Gaitero, I. Campillo, P. Mondal and S. P. Shah, 2010, "Small Changes Can Make a Great Difference" In Transportation Research Record, Journal of the Transportation. Volume: 2141, issue: 1, page(s): 1-5 [12] J.Song, and S. Liu. "Properties of Reactive Powder Concrete and its Application in Highway Bridge." Advances in Materials Science and Engineering (2016). [13] B. S. Mohammed, V. C. Khed and M. Fadhil, 2017, "A Review on Nano-silica Based Concrete," J Nanomed Nanoscience: JNAN-128, Volume 02; Issue 05. DOI: 10.29011/. [14] S. Du, O. Alshareedah and X. Shi, "Nanotechnology in Cement-Based Materials: A Review of Durability, Modelin 5g, and Advanced Characterization," Nanomaterials, vol. 9, no. 9, 2019. [15] R. Siddique and M. I. Khan, "Supplementary Cementing Materials, Silica Fume," XVI Publishers, 288 P, ISBN: 978- 3-642-17865-8, p. 288, 2011. [16] A. Bashir, M. Gul, J. A Naqash, A. Masood, " Study of Permeability and Compressive Strength of Silica Fume Concrete" International Journal of Engineering and Advanced Technology (IJEAT) ISSN: 2249 – 8958, Volume-3, Issue-4, April 2014. [17] M. N. Haque and O. Kayali, "Properties of High-Strength Concrete Using a Fine Fly Ash," Cement Concrete Research, vol. 28, no. 10, pp. 1445-1452, 1998. [18] M. A. Rasol, "Effect of Silica Fume on Concrete Properties and Advantages for Kurdistan Region, Iraq," International Journal of Scientific and Engineering Research, vol. 6, no. 1, pp. 170-173, 2015. [19] T. Sankaralingam, A. Chandanroy and S. N. Pandey, "Fly Ash For Cement Concrete," Ash Utilization Division-NTPC Limited, A-11, NFL Premises, Sector–24, Noida–201301, 2007. [20] M.Tokyay, "Cement and Concrete Mineral Admixtures". CRC Press, 2016. [21] K. N. Ismail, K. Hussin and M. S. Idris, "Physical, Chemical and Mineralogical Properties of Fly Ash," Journal of Nuclear and Related Technology, vol. 4, no. Special Edd., pp. 47-51, 2007. [22] N. Gamage, K. Liyanage, S. Fragomeni and S. Setunge, "Overview of Different Types of Fly Ash and their use as a Building and Construction Material," in International Conference of Structural Engineering, Construction and Management, 2011. [23] G. Li, "Properties of High-volume Fly Ash Concrete Incorporating Nano-SiO₂," Cement and Concrete Research, vol. 33, no. 6, pp. 799-806, 2003. [24] P. Nath and P. Sarker, "Effect of Fly Ash on the Durability Properties of High Strength Concrete," Procedia Engineering, vol. 14, p. 1149–1156, 2011. [25] A. M. Said, M. S. Zeidan, M. T. Bassuoni and Y. Tian, "Properties of Concrete Incorporating Nano-silica," Construction and Building Materials, vol. 36, pp. 838-844, 2012. [26] O. S. B. Al-Amoudi, M. .. Maslehuddin and T. O. Abiola, "Effect of Type and Dosage of Silica Fume on Plastic Shrinkage in Concrete Exposed to Hot Weather," Construction and Building Materials, vol. 18, no. 10, pp. 737-743, 2004. [27] A. Annadurai and A. Ravichandran, "Development of Mix Design for High Strength Concrete with Admixtures," IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), vol. 10, no. 5, pp. 22-27, 2014. [28] M. Thomas, 2007, "Optimizing the Use of Fly Ash in Concrete" Portland Cement Association, Publication IS548, 2007, pp. 24. [29] A. V. Rao and K. S. Rao, "Effect of Fly Ash on Mechanical Properties of M30 and M60 Grade Concrete," International Journal of Civil Engineering and Technology (IJCIET), vol. 8, no. 3, p. 193–200, 2017. [30] A. V. Rao and K. S. Rao, "Effect of Fly Ash on Strength of Concrete," Circular Economy and Fly Ash Management, vol. 8, no. 3S, pp. 125-134, 2019. [31] M. Thomas, 2007, "Optimizing the Use of Fly Ash in Concrete" Portland Cement Association, Publication IS548, 2007, pp. 24. [32] L. K. Saini and J. R. Nayak, "To Study Effects on the Mechanical Properties of Concrete after Partially Replacing Cement by Silica Fume," International Research Journal of Engineering and Technology (IRJET), vol. 6, no. 9, pp. 752-755, 2019. [33] I. A. Sharaky, F. A. Megahed, M. H. Seleem and A. M. Badawy, "The Influence of Silica Fume, Nano Silica and Mixing Method on the Strength and Durability of Concrete," SN Applied Sciences, vol. 575, 2019. [34] Ganesh, R. Murthy, S. Kumar, M. S. Reheman and Iyer, "Effect of nanosilica on durability and mechanical properties of high-strength concrete," Magazine of Concrete Research, November 2015, Volume:68, pp. 1-8.
Statistics Article View: 508 PDF Download: 628