DESIGN AND PERFORMANCE EVALUATION OF JOJOBA OIL EXPELLING MACHINE | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 14, Volume 35, Issue 4, October 2018, Page 1409-1420 PDF (398.29 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2018.95338 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| M. M. Badr | ||||
| Assistant professor of Agric. Eng., Fac. of Agric., Zagazig Univ. Egypt. | ||||
| Abstract | ||||
| Biodiesel is a type of biofuel that is appropriate for use in diesel engines. The non-edible vegetarian oil of the jojoba tree (Simmondsia Chinensis) is cultivated in tropical and subtropical climates worldwide and has the potential for use as a commercially applicable alternative to diesel. Jojoba oil is a renewable fuel that is environmentally friendly and can be readily produced. The main aim of this study is design and the performance evaluation of a expelling machine for extracting the oil jojoba as an alternative energy resource in terms to reduce the required pressure and power consumption and obtain significant productivity improvements. The press screw was designed square-shaped threads to obtain flexible motion with high transmission efficiency compared with that of the other threads. The effective stroke length of the press screw was gradually decreased from the feed port to the discharge end by increasing the screw depth to conform the requisite amount of jojoba seeds. Based on this design, can be used a planetary transmission system to transfer the largest torque during extraction process that ensure lower energy consumption at lower speeds in comparison with the conventional power transmission systems. The performance of the oil expelling machine was studied under the rotation screw speed and press clearance between screw and press barrel. Performance evaluation of the machine was carried out in terms of the throughput capacity, extraction efficiency and specific energy. The jojoba oil expelling machine has been manufactured with a throughput capacity of 135.85 kg.h-1 and a machine efficiency of 88.55% furthermore the lowest value of energy requirement was 40.48 kW.h.Mg-1 by decrease of 18.47% by operating the oil expelling machine at rotation speed of 65 rpm with 2 mm press clearance. | ||||
| References | ||||
|
Akerele O. V. and S.O. Ejiko (2015): Design and construction of groundnut oil expeller. International Journal of Engineering and Computer Science, 4 (6): 12529-12538.
Al-Hamamre Z. and K. M. Rawajfeh (2015): Investigating the energy value of jojoba as an alternative renewable energy source. International journal of green energy, 12(4): 398-404.
Al-Widyan M. I. and M. A. Al-Muhtaseb (2010): Experimental investigation of jojoba as a renewable energy source. Energy Conversion and Management, 51(8): 1702-1707.
Blin J; C. Brunschwig, A. Chapuis, O. Changotade, S. S. Sidibe, E. S. Noumi and P. Girard (2013): Characteristics of vegetable oils for use as fuel in stationary diesel engines-Towards specifications for a standard in West Africa. Renewable and Sustainable Energy Reviews, 22: 580-597.
Chapuis A; J. Blin, P. Carre and D. Lecomte (2014): Separation efficiency and energy consumption of oil expression using a screw-press: The case of Jatropha curcas L. seeds. Industrial Crops and Products, 52: 752-761.
Huzayyin A. S; A. H. Bawady, M. A. Rady and A. Dawood (2004): Experimental evaluation of diesel engine performance and emission using blends of jojoba oil and diesel fuel. Energy Conversion and Management, 45(13): 2093-2112.
Ojolo S.J; J.I. Orisaleye and S.O. Ismail (2012): Design of a jatropha oil expelling machine. Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), 3(3): 412-419.
Pradhan R. C; S. Mishra, S. N. Naik, N. Bhatnagar and V. K. Vijay (2011): Oil expression from Jatropha seeds using a screw press expeller. Biosystems engineering, 109(2): 158-166.
Savoire, R; J. L. Lanoiselle and E. Vorobiev (2013): Mechanical continuous oil expression from oil seeds. Food and Bioprocess Technology, 6(1): 1-16. | ||||
|
Statistics Article View: 215 PDF Download: 300 |
||||
