FLAX RETTING USING SPRINKLER SYSTEM | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 7, Volume 35, Issue 2, April 2018, Page 501-514 PDF (415.58 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2018.95776 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| T. Attafy1; A. M. Mousa2 | ||||
| 11Researcher, Agric. Eng. Res. Inst., Agric. Res. Center, Egypt. | ||||
| 2Head researcher, field crop Res. Inst., Agric. Res. Center, Egypt. | ||||
| Abstract | ||||
| This study was undertaken to examine sprinkler retting as an eco-friendly method compared with water (traditional) retting. For this purpose an experiment under open field conditions was carried out in fiber crops research department, Gemmiza Research Station, Gharbeiah Governorate, middle of the Nile Delta, Egypt during autumn season of 2017. The microsprinkler irrigation system was applied with four levels operating pressure head namely; 5 m (P1), 7.5 m (P2), 10 m (P3) and 12.5 m (P4) and two operating times namely; 1.5 h/day (T1) and 3 h/day (T2). Main results cleared out that, increasing operating pressure head increased water application uniformity, sprinkler retting decreased total applied water compared with water (traditional) retting, The lowest total applied water was 8.33m3/ton straw obtained at T2P4 treatment, while The highest one was 13.3m3/ton straw obtained at T2P1 treatment and total applied water for water retting was 10.45 m3/ton straw. Traditional/water retting produced highest fiber percentage, 16.4%; while the highest fiber percentage under sprinkler retting was 15.5% obtained at T2P4 treatment, traditional/water retting produced highest fiber length (87.5cm), while T2P2 treatment produced highest fiber fineness (273). The highestwater productivity was 18.6 kg/m3 obtained at T2P4. | ||||
| References | ||||
|
Evans, J. D.; D. E. Akin; W. H. Morrison and D. S. Himmelsbach (2002). Modifying Dew-Retted Flax Fibers by Means of Air-atomized Enzyme Treatment. Textile Res. J. 72, 579-585.
Hassan, M. H.; M. E. Kiwan; A. El-Amin and M. S. Abuarab (2007). Hydraulic characteristics and water distribution patterns of microsprinkler irrigation systems. Misr J. Ag. Eng., 24(4): 849- 885.
Henriksson, G.; K. E. L. Eriksson; L. Kimmel and D. E. Akin (1998). Chemical/Physical Retting of Flax Using Detergent and Oxalic Acid at High pH. Textile Res. J. 68: 942-947.
James, L.G. (1988). Principles of farm irrigation system design. John Willey/Sons (ed.), New York: 543.
Konczewicz, W. and J. Wojtysiak (2015). The effect of physical factors on the process of physical-mechanical degumming of flax fibers. Textile Res. J. 85 (4): 391–403
Konczewicz, W.; M. Zimniewska and M. A. Valera (2017). The selection of a retting method for the extraction of bast fibers as response to challenges in composite reinforcement. Textile Res. J. 0(00) 1–16.
Kozlowski, R.; W. Konczewicz and J. Wojtysiak (2006). Device for processing fibrous raw materials and the method of fibrous plants processing. Institute of Natural Fibers &Medicinal Plants. Poland. Patent application EP 2242876 B1, Date of filing: 23 November. European patent.
Mehawed, H. S.; A. M. El-Shazly and Y. E. Arafa (2013). Hydraulic performance assessment of sprinkler types for improving on- arm irrigation efficiencies. Third International Conference for Agricultural & Bio-engineering. Egypt. J. Ag. Res., 91 (2A):367-379.
Playan, E.; N. Zapata; J. M. Faci; D. Tolosa; J. L. Lacueva and J. Pelegrin (2006). Assessing sprinkler irrigation uniformity using a ballistic simulation model. Agricultural Water Management, 84 (1-2): 89-100.
Radwan, S. R. H. and A. Momtaz (1966). The technological properties of flax fibers and the methods of estimating them. El-Falaha J. 46(5): 466-476 (In Arabic). Sanchez, I; N. Zapata and J. M. Faci (2010). Combined effect of technical, meteorological and agronomical factors on solid set sprinkler irrigation: I. Irrigation performance and soil water recharge in alfalfa and maize. Agricultural Water Management, 97 (10): 1571-1581.
Van Sumere, C. F. (1992). Retting of Flax with Special Reference to Enzyme-retting, in "The Biology and Processing of Flax," H. S. S. Sharma and C. F. Van Sumere, Eds., M Publications, Belfast, Northern Ireland, pp. 157.
Zhu, X.; S. Yuan; J. Jiang; J. Liu and X. Liu (2015).Comparison of fluidic and impact sprinklers based on hydraulic performance. Irrig Sci. 33: 367–374. | ||||
|
Statistics Article View: 126 PDF Download: 238 |
||||
