DEVELOPMENT A PROTOTYPE FOR IMPROVING THE PERFORMANCE OF THE CLEANING UNIT IN COMBINE HARVESTING MACHINE | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 1, Volume 35, Issue 1, January 2018, Page 1-18 PDF (1.98 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2018.95841 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| E. M. E. Sehsah1; S. E. Abouzaher2; R. M. Kholief3; A. H. El-Hanafy4 | ||||
| 1Associate Prof. in Agric. Eng. Dept., Fac, of Agriculture, Kafrelsheikh Univ.33516, Egypt | ||||
| 2Assist. Professor, Agric. Eng. Dept., Faculty of Agric., Kafrelsheikh University, Egypt. | ||||
| 3Head researcher, Agric. Eng. Res. Institute. Dokki., Giza. Egypt. | ||||
| 4Engineer, Agric. Eng. Res. Institute. Dokki., Giza. Egypt. | ||||
| Abstract | ||||
| Seed cleaning is an important operation in a number of processes connected with the handling of seed after harvest. The goals of the current research were developing of a laboratory unit for cleaning the wheat crops in combine harvesting machine. The laboratory model was manufactured to simulate and study the aerodynamic characteristics of air and test the performance of the developed cleaning unit at four aerodynamic suction velocities 5.9, 8.5, 11.6 and 14.9 m/s., three feed rates 3, 5, and 7 kg/min, two rotational speed 245 and 350 r.p.m to operate the screens, two shapes for suction part rectangular and circle and three slope angles for screens 5°, 10° and 15° with three replicates. The results indicated that the average of minimum specific energy was 8.46 kw.h.ton-1 at 5.9 m/saerodynamic suction velocity, 5º screen slope, 0.42 ton/h feed-rate, 245 rpm rotational speed and circle shape of suction tube. Also, the maximum cleanliness was 99.41 % for aerodynamic suction velocity of 14.9 m.s-1, slope of the screen was 15º, at feed-rate of 3 kg.min-1, rotational speed of 245 rpm and rectangular shape of suction tube. On the other hand, the minimum grain losses percent was 0.53% at aerodynamic suction velocity of 5.9 m.s-1, 5º slope of the screen, 3 kg.min-1feed-rate, 245 rpm rotational speed and circle shape. | ||||
| Keywords | ||||
| Aerodynamic properties; development; cleaning unit and combine harvesting | ||||
| References | ||||
|
Beck, F. (1999). Simulation of separation processes in combine harvesters. Ph.D. dissertation, Hohenheim University, Forschritt-Berichte VDI, Reihe, 14(92).
El-Fawal, Y.A., M.A. Tawfik and A.M. El-Shal. (2009). Study on physical and engineering properties for grains of some field crops. Misr J. Ag. Eng., 26(4), pp: 1933-1951.
El-Sheikha, M.A., H. E. El-Morsy and M. A. I. Al-Rajhi. (2010). Some physical and mechanical properties of Wheat grain. J. of Soil Sciences and Agricultural Engineering. Vol.1 (3), pp: 299 - 309.
FAO. Http://www.fao.org/faostat/en/#data/QC )5/9/2017(
Hanna, S., S.M. Ahmed, N.M. El-Ashmawy. (2010). Selection of the main factors affecting cleaning and grading fennel seeds at inclined sieve oscillation. misr j. ag. Eng. 27 (2), pp: 628 – 643.
Khoshtaghaza, M. H. and Mehdizadeh, R. (2006). Aerodynamic property of wheat kernel and straw materials. The CIGR E-journal. Vol. (8), Manuscript FP 05 007.
Kurt, G. (1979). Engineering formulas. MacGraw hill book company. 3rd ed. New York. St. Louis San Francisco Montreal-Toronto.
Mohsenin, N.N. (1980). Physical properties of plant and animal materials, 2nd ed. Gordon and Breach Science Publishers, New York.
Muhammad, U.S., L.G. Abubakar, M. Isiaka and R.M. Davies. (2013). Design and evaluation of a cleaning machine. App. Sci. Rep. PSCI Publications. Vol. 1 (3), pp: 62-66.
Simonyan, K.J. and Y.D. Yiljep. (2008). Investigating grain separation and cleanliness distribution of a conventional stationary rasp-bar sorghum thresher. Agricultural Engineering International: the CIGR E Journal Manuscript PM. 7 (28). Vol. 10. August.
Tabatabaeefar, A., H. Aghagoolzadeh and H. Mobli. (2003). Design and development of an auxiliary chickpea second sieving and grading machine. Agricultural Engineering International: the CIGR Journal of Scientific Research and Development. Manuscript FP. 3 (5). Vol. V. December.
Unal, H. (2009). Some Physical and Nutritional Properties of Hulled Wheat. Tarim Bilimleri Dergisi. Vol. 15 (1), pp: 58-64.
Unal, H., G. Izli, N. Izli and B. Asik. (2017). Comparison of some physical and chemical characteristics of buckwheat (Fagopyrum esculentum Moench) grains. CYTA Journal of Food. Vol. 15(2), pp: 257–265. | ||||
|
Statistics Article View: 165 PDF Download: 280 |
||||
