A LOCAL CORN SHELLER PERFORMANCE AS AFFECTED BY MOISTURE CONTENT AND MACHINE ROTATIONAL SPEED | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 27, Volume 34, Issue 4, October 2017, Page 2015-2034 PDF (706.94 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2017.96240 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Hany M. El-Sharawy1; Adel H. Bahnasawy2; Zakaria A. EL-Haddad3; Mohamed T. Afifi4 | ||||
| 1Graduate Student, Ag. Eng. Dept., Fac. of Ag., Benha Univ., Egypt. | ||||
| 2Prof. of Ag. Eng., Fac. of Ag., Benha Univ., Egypt. | ||||
| 3Prof. Emeritus of Ag. Eng., Fac. of Ag., Benha Univ., Egypt. | ||||
| 4Lecturer. of Ag. Eng., Fac. of Ag., Benha Univ., Egypt. | ||||
| Abstract | ||||
| A local corn sheller was evaluated at different rotational speeds of (40, 60, 80, 100 and 120 rpm) and moisture contents of (12, 16 and 20%). The performance was evaluated in terms of sheller productivity, shelling efficiency, unshelled grains, grain damage, loose grains at kernel outlet, specific energy consumption and operational cost. Sheller productivity, shelling efficiency, and the percentage of unshelled grains ranged from 0.43 to 1.46 ton/h, from 94.25 to 99.43%, and from 0.57 to 5.75%, respectively. The percentage of grain damage and loose grains at kernel outlet ranged from 0.21 to 2.13%, from 1.57 to 25.15%, respectively. Meanwhile, specific energy consumption and operational cost ranged from 0.74 to 6.87 kW.h/ton and from 18.19 to 64.42 LE/ton, respectively. It was found that increasing the speed caused an increase in performance of shelling and the percentage of broken grains. It is concluded that corn having 12 % moisture content that fed to the sheller at rotational speed of 120 rpm gave the best performance of shelling. | ||||
| Keywords | ||||
| Maize sheller; Shelling efficiency; Productivity; Specific energy consumption | ||||
| References | ||||
|
Al Jalil and M. Chowdury. 1980. Laboratory studies of a low damage corn shelling machine. Trans. Of ASAE, 11(2): 278-283.
Arif, E. M. 2003. Design of simple corn Shellers for farmer house. Misr J. of Agric. Eng., Vol. 81, No. 4.
Awady, M. N. 1978. Engineering of tractors and agricultural machinery, Text book, Fac. Agric., Ain Shams Univ., 5th ed.: 164-167. (In Arabic).
Ayetigbo, M. O. 2001. Design and construction of maize sheller. PGD Thesis, Federal University of Technology, Akure, Nigeria.
Buliaminu, K. 2011. Development of a roll-in oriented machine for maize shelling. Journal of Materials Science and Engineering, B 1: 530-535.
Chilur, R., Sushilendra, V. Palled, M. Veeranouda, R.S. Yaranal, S. Hiregoudar, N. B. Mareppa. 2014. Effect of operational parameters on dehusking cum-shelling efficiency and broken grain percentage of maize dehusker-cum sheller. International J. of Science Research, 3(8): 2277-8179.
Food and Agricultural Organisation (FAO).2014. http://faostat3.fao.org/download/Q/QC/E
Kurt, G. 1997. Engineering formulas. 3rd. Ed. Mc Graw – Hill book Co.
Metwally, K. A. 2010. Study the effect of some operational Factors on hammer mill. MSc Thesis of Department of Agricultural Engineering, Fac. of Agric., Zagazig Univ., Egypt.
Naveenkumar, D. B. and K. S. Rajshekarappa. 2012. Performance evaluation of a power operated maize sheller. Internal. J. agric. Eng., 5(2):172-177.
Odigboh, E. U. 1997. Machines for crop production. In: Stout BA, editor. Handbook of agricultural engineering-plant production engineering. American Society of Agricultural Engineers.
Wanjala, N. F. 2014. Design of a Modified Hand Operated Maize Sheller. Engineering Design Project Report submitted to the University of Nairobi. | ||||
|
Statistics Article View: 515 PDF Download: 505 |
||||
