Abrasive Wear of Nano-Al2O3 Particles and CNTs Strengthened 2024 Aluminum Alloy Composites Manufactured by Powder Metallurgy. | ||||
MEJ- Mansoura Engineering Journal | ||||
Article 14, Volume 40, Issue 5, December 2015, Page 66-72 PDF (759.82 K) | ||||
Document Type: Research Studies | ||||
DOI: 10.21608/bfemu.2020.96283 | ||||
View on SCiNiTO | ||||
Author | ||||
Manal Amin Ramadan | ||||
Mechanical Engineering department, The Higher Technological Institute, Tenth of Ramadan City, Egypt | ||||
Abstract | ||||
Metal matrix composites reinforced by carbon nanotubes as well as the effect of Nano Al2O3 (n- Al2O3) particles and carbon nanotubes (CNTs) are very promising materials, suitable for a large number of applications. These composites consist of a metal matrix filled with Nano-particles featuring physical and mechanical properties very different from those of the matrix. The Nano-particles can improve the base material in terms of electrical properties, damping properties and mechanical strength. In this work we investigated the effect of reinforcing Al-2024 with CNTs and n- Al2O3. The Al-2024 alloy was produced by powder metallurgy. The alloy strengthened by a dispersion of two weights % CNTs, 2wt% n- Al2O3, and 1weight % CNTs + 1wt% n- Al2O3 respectively. The effect of the CNTs, and Nano Al2O3 on the microstructure, hardness, and wear, were studied. The micro structural results showed a homogeneous dispersion of CNTs and n- Al2O3 into Al2024. We obtained that the composite 1weight % CNTs + 1wt% n- Al2O3 can increase, hardness as well as reduce the weight loss by 46%, and 80%, respectively. Our results enhance the wear behavior of the composites by using different types of reinforcements. | ||||
Keywords | ||||
Nano composite; SEM; CNT; Nano Al2O3; Wear; Hardness | ||||
Statistics Article View: 126 PDF Download: 190 |
||||