DEVELOPMENT AND EVALUATION OF A GARLIC''Allium sativum" PEELING PROTOTYPE | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 26, Volume 34, Issue 2, April 2017, Page 1023-1042 PDF (920.13 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2017.96838 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| M. M. Badr | ||||
| Lecturer of Ag. Products Porocess Eng. Dept., Fac. of Ag. Eng., Al-Azhar Univ., Cairo, Egypt. | ||||
| Abstract | ||||
| The aim of the present study is to develop and evaluate garlic peeling prototype by centrifugation and friction to be used in home and small processing units as restaurants and hotels. Experiments were carried out with two varieties of garlic cloves, three numbers of fins (one fin, two fins and three fins) and three rotating disk speed (1600, 1800 and 2000 r.p.m). Results showed that the highest values of productivity were 4.00 and 1.47 kg/h for red garlic "RG" and white "WG" garlic respectively at disk speed of 1600 r.p.m and number of fins of 1 fin, the lowest values of cloves damage percentage were 2.26 % and 6.92 % for "RG" and "WG" garlic respectively for disk speed of 1600 r.p.m and fins number of 3fin and the lowest values of unpeeled cloves percentage were 5.29 % and 19.20 % for "RG" and "WG" garlic respectively for disk speed of 2000 r.p.m and fins number of 1fin. Comparing peeling efficiency for the same operational conditions clear that the peeling efficiency for "RG" garlic was 85.1 % compared to 57.6 % for "WG" garlic. The dimensional analysis was reasonably accepted for predicting the peeling efficiency with coefficient of determination 0.978 that helps in producing large scale peeling machines of garlic cloves. | ||||
| References | ||||
|
ASAE, (1994).ASAE standards. American Society of Agricultural Engineers. St. Joseph USA.
Awady, M. N.; I. Yehia; M. T. Ebaid and E. M. Arif (2003). Development and threory of rice cleaner for reduced impurities and losses. Misr J. Ag. Eng., 20 (4): 53- 68.
Emadi, B.; M. H Abbaspour-Fard and P. K. D. Yarlagadda (2007). An innovative mechanical peeling method of vegetables. Proceedings of the International Agricultural Engineering Conference, Bangkok, Thailand, 3-6 December 2007.
Langhaar, H. L., (1951). Dimensional analysis and theory of models, John Wiley and Sons, INC.
Matthews, J., ( 1991) Progress in Agricultural physics and Engineering. (Hand Book). Chapter (8): 203-227.
Mudgal, V. D. and P. S. Champawat (2011). Development of a Garlic Clove Peeler for Small Scale Industry, International Journal of Food Engineering: Vol. 7: Iss.3, Article 4.
Park, W. P.; S. H. Cho and D. S. Lee (1998). Effect of Minimal Processing operations on the quality of garlic, green onion, soybean sprouts and watercress. J. Sci. Food Agric., 77, 282-286.
Somsen, D.; A. Capelle and J. Tramper (2004). Manufacturing of par-fried French-fries. Part 2: Modelling yield efficiency of peeling. Journal of Food Engineering. 61: 2, 199-207.
Zeng, T.; F.F. Guo; C.L. Zhang; S. Zhao; D.D. Dou; X.C. Gao and K.Q. Xie (2008. )The anqti-fatty liver effects of garlic oil on acute ethanol-exposed mice" Chemico-Biological Interactions. 176: 234–242. | ||||
|
Statistics Article View: 163 PDF Download: 329 |
||||
