ENERGY CONSUMPTION OF OLIVE OIL EXTRACTION BY DIFFERENT METHODS | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 21, Volume 34, Issue 1, January 2017, Page 369-384 PDF (511.91 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2017.97126 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| G. K. Arafa1; A. A. Abd El-Rahmam2 | ||||
| 1Senior Researcher, Agric. Eng. Res. Institute, Agric. Res. Center, Egypt. | ||||
| 2Head of Researchers, Agric. Eng. Res. Institute, Agric. Res. Center, Egypt. | ||||
| Abstract | ||||
| A study was conducted on the evaluation of energy use in traditional and machinery methods to extract oil in olive oil Company in Agricultural Research Center revealed. The objectives of the study were: (1) To determine and identify the level of consumption of the energy sources in use., (2) To determine energy consumption for oil production in two extraction olive oil methods., and (3) To enhance oil production with minimum energy input though olive oil industry to relate energy use. The obtained results were as follow: a) Physical and mechanical properties of olive fruits. It noticed that the values were from 2.02 to 2.55 cm, from 1.58 to 1.944 cm, from 2.88 to 5.23 g, from 50 to 49.85%, and from 530 to 502 N for length, width, weight, moisture content, and hardness., b) The major energy sources were manual, MRT and electrical energies. MRT energy was the highest energy consumed. MRT energy consumptions, mostly expended in operating of manufacture, transport, and repairs were 2114.7 and 47329 MJ for traditional and machinery methods., and c) Traditional and electrical energy were expended in operating machines was found to be the least consumed energy with values were (13.5 and 6.75 MJ) and (132.8 and 209.2 MJ) for traditional and machinery methods, respectively | ||||
| Keywords | ||||
| Olive fruits; Extraction; Traditional; Mechanical; Energy; Oil and Consumption | ||||
| References | ||||
|
Abubakar M. and B.Umar (2006). “Comparison of Energy Use Patterns in Maiduguri and Yobe Flour Mills, Nigeria”Department of Agricultural Engineering, Bayero University. Agricultural Engineering International: the CIGR E. journal. Manuscript. EE 06 004. Vol. VIII. Pages : 1-6.
Akinbami, J. F.; M. O. Ilori; A. A. Adeniyi, and S. A. Sanni (2001). Improving Efficiency of Energy Use in Nigeria’s Industrial Sector: A Case Study of a Beverage Plant. Nigerian Journal of Engineering Management 2(2):1-8.
Al Kurki, Janet Bachmann and Holly Hill, (2008). Plant Benefits: Olive oil lines for batch and continuous processing, Oilseed Processing for Small-Scale Producers:
Alam, M.S. (2007). Basic of fats and Oils Chemistry: Factors Affecting Crude Oil Quality. Presented to the Vegetable Oils Extraction Short Course, Texas A&M Food Protein R&D Center, College Station, Texas. Page 28
Alcaide, E. M. and A. Nefzaoui (1996). Recycling of Olive Oil by-Products: Possibilities of utilization in Animal nutrition, International Biodeteriotation & Biodegradation, p. 227-235, Elsevier Science Limited, UK
Boskou, D., G. Blekas and M. Tsimidou (2005). Phenolic compounds in olive oil and olives. Current Topics in Nutraceutical Res., 3(2),125–136.
Bridges, T. C. and E. M. Smith (1979). A method of determining the total energy input for agricultural practices. Transactions of the ASAE, 2:781 - 784.
Chinnan, M. S.; R. P.Singh; L. D. Pederson; P. A. Carroad; W. W. Rose and N. L. Jacob (1980). Analysis of Energy Utilization in Spinach Processing. Transactions of the ASAE 23:503-507.
Fellows, Peter, and Ann Hampton (1992). Small- Scale Food Processing: A Guide to Appropriate Equipment. Practical Action Publishing – formerly the Intermediate Technology Development Group. 158 p.
Gutierrez, F.; T. Arnaud and A. M. Albi (1999). Influence of ecological cultivation on virgin olive oil quality. J. Am. Oil Chem. Soc. 76 (5): 617–621.
Herz, J. (1997). Using and Maintaining the Ram Press. Enterprise Works Worldwide. Washington, DC. 42 p.
Igene, J. O.; M. M. Farouk and C. T. Akanbi (1990). Preliminary Studies on the Traditional Processing of Kilishi. J. SCI. Food Agric. 50: 89 – 98.
Jekayinfa, S.O. and E.O. Olafimihan, (2000). A Study and Analysis of Energy Consumption in Beverage Producing Plants in Nigeria. The Annual Conference of Nigeria Institute of Industrial Engineers, Ibadan. 12th-17th, October.
Kurki M., I. Beheshti Tabar, and G.M. Khubbakht (2008). Energy Production in Iran’s Agronomy. Department of Agricultural Machinery Engineering, Faculty of Biosystems Engineering, University of Tehran, Iran Am-Euras. J. Agric. & Environ. Sci., 4 (2): 172-177.
Ministry of Agriculture and Land Reclamation of Egypt (2014). The production of high-quality olive oil according to, technical bulletin No. 2/2014 / issued.
Norman, M. J. T. (1978). Energy Inputs and Outputs of Subsistence Cropping Systems in the Tropics, Agro-Ecosystems, 4:355 - 366.
Owen, R. W., A. Giacosa, W. E. Hull, R. Haubner, G. Wurtele, B. Spiegelhalder and H. Bartsch (2000). Olive oil consumption and health: The possible role of antioxidants. Lancet Oncology, 1: 107– 112.
Pilgeram, A. (2008). Principles of Oil Extraction. Practical Action Publishing , Small Scale Grain and Pulse Production forum. Colchester, Essex, UK.
Pimentel, D. (1992). Energy Inputs in Production Agriculture. Energy in Farm Production, Elsevier, and Amsterdam. Pp.13-29.
Van Gerpen (2006). Building a Successful Biodiesel Business. Second edition. Biodiesel Basics. 277 p
Van Gerpen, J. (2008). Small Scale Grain and Pulse Production forum. May 17, 2008. Cleaning Up. Small Scale Grain and Pulse Production: A Forum for Information on Grain and Pulse Production for Food. | ||||
|
Statistics Article View: 179 PDF Download: 283 |
||||
