MODIFICATION OF A REAPER-BINDER | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 2, Volume 34, Issue 3, July 2017, Page 1155-1166 PDF (397.1 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2017.97447 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| O.T. Bahnas1; Shreen F. Abd El-Hameed2; Heba A. Lotfy3 | ||||
| 1Head of Researcher at Agric. Eng. Res. Inst. (AEnRI), Agric. Res. Center, Egypt. | ||||
| 2Senior Researcher at Agric. Eng. Res. Inst. (AEnRI), Agric. Res. Center, Egypt. | ||||
| 3Researcher at Agric. Eng. Res. Inst. (AEnRI), Agric. Res. Center, Egypt. | ||||
| Abstract | ||||
| This study was carried out at a private farm in Owlad Sakr District, El-Sharkia governorate Egypt during 2016 summer season. Wheat Misr 1 variety was harvested using a modified self-propelled reaper-binder. The modification was assembling a conveyor mat to facilitate the harvested material failling down upon the soil surface. The experiment was established and designed statistically as a factorial experiment with three replications. the tested treatments were mat linear speed (0.09, 0.10, 0.11 and 0.12 m/s) and mat oblique angle (10, 20, 30 and 40° with the horizontal).. The results indicated that 0.09 m/s mat linear speed accompanied with 10° mat oblique angle accomplished higher machinery productivity of 3.55 Mg grains/h and 3.61 Mg straw/h,lower specific energy requirements of 26.43 MJ/Mg, lower conveying losses of 5% grains and 4.8% straw and lower operational costs of 891 LE/mg. So, it is recommended to apply the modified reaper-binder to harvest and bind for wheat and other grain crops. | ||||
| References | ||||
|
Abdrabo, A.F. (2015). Development of a self-propelled reaper for wheat crop. Misr J. Agric. Eng., 32 (1): 41-66.
Abo El-Naga, M.H.; H.A. El-Gendy and G.G. Radwan (2009). Determine of wheat harvest systems requirements. J. Agric. Sci. Mansoura Univ., 34 (5): 5823-5835.
ASAE Standards. 48th Ed. (2003). Current standards for calculating tractor performance parameters including draft. ASAE D497.4 St. Joseph, MI.
Begum, E.A.; M.I. Hossain and E. Papanagiotou (2012). Economic analysis of post-harvest losses in food grains for strengthening food security in northern regions of Bangladesh. IJAR-BAE, 1 (3): 56-65.
El-beba, A.M.; Y.Y. Ramadan and M.C. Ahmed (2015). Maximizing the benefits of Japanese type combine for wheat reaping. Misr J. Agric. Eng., 32 (4): 1485-1502.
Hanan, M. (2014). An economic analytical study of the current situation and the future of the wheat self sufficiency in Egypt. Egypt J. Agric. Res. 92 (2): 781-801.
Ismail, Z.I. (2007). Applied and theoretical fundamentals in seed-bed preparation implements. Part 1 2nd Ed. Agric. Eng. Dept., Fac, Agric., Mansoura Univ., 298 pp (In Arabic).
Muhammad, S.; D. Mueen; A. Mushtaq; A. Liaqat; Q. Masood; A. Muhammad and K. Laila (2015). Grain losses of wheat as affected by different harvesting and threshing techniques. Int. J. of Res. in Agric. and Forestry, 2 (6): 20-26.
Murumkar,U.R.; U.R.Dongarwar; P.A.Borkar; P.S.Pisalkar and D.S.Phad (2014) performance evaluation of self-propelled vertical conveyer reaper. Published oct2, (IJSET), 3(5): 1701-1705.
Pawar, C.S.; N.A. Shirsat and S.V. Pathak (2008). Performance evaluation of combine harvester and combination of self-propelled vertical conveyor reaper with thresher for wheat harvesting. Agric. Update, 3(1&2): 123-126.
Shamabadi, Z. (2012). Measurement the wheat losses in harvesting stage. International J. of Agric. and Crop Sci. 4 (23): 1797-1802.
Srivastava, A.K.; C.E. Goering and R.P. Rohrbach (2006). Engineering principles of agricultural machines. 2nd Ed. ASABE Pub. USA.
Zami, M.A.; M.A. Hossain; M.A. Sayed; B.K. Biswas and M.A. Hossain (2014). Performance Evaluation of the BRRI Reaper and Chinese Reaper Compared to Manual Harvesting of Rice (Oryza sativa L.). The Agriculturists, 12 (2): 142-150. | ||||
|
Statistics Article View: 198 PDF Download: 572 |
||||
