FABRICATION AND EVALUATION OF A MACHINE FOR SEPARATING FIBER FLAX | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 7, Volume 33, Issue 4, October 2016, Page 1273-1292 PDF (650.69 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2016.97597 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| A. M. DRESS | ||||
| Assoc. Prof., Ag. Eng. Dept., Fac. of Agric., AL-Azhar University- Assuit, Egypt. | ||||
| Abstract | ||||
| Flax stalks usually considered a waste product which may be utilized by separation into marketable fiber and shive. The fiber can be used for applications such as composites and paper. Separation of traditional long line fiber from fiber flax stalks is a rigorous and expensive process that requires the stalk to be biologically degraded (retted) befor processing. A local machine for removing flax fiber from chopped seed flax straw has been manufactured at a private workshop in kafr El-sheikh Governorate during summer season of 2015. The manufactured machine consists of three main devices namely: feeding and breaking device, scutching and hackling device and cleaning device. The manufactured machine has been evaluated under three straw moisture contents of 10.2, 13.2and 15 %, three deram schell speeds of 500, 650 and 800 rpm and five feeding roller speeds of 1, 1.5, 2, 2.5and 3 m/s. The Separation efficiency, fiber longth and fineness, machine Productivity, consumed Energy, and quality of fiber were studied. The obtained results can be summarized as follows: The maximum separation efficiency of flax fiber (82.13%) and fiber fineness (191.6 mm/mg) was obtained at straw moisture content 0f10.2%, feeding roller speed of 1m/sec and derma schell speed of 800 r.p.m . The fiber Length (92.8cm) was obtained at straw moisture content of 10.2%, feeding roller speed of 1m/sec and derma schell speed of 500 r.p.m. The lowest value of energy consumption was (1 kw) recorded at straw moisture content of10.2%, feeding roller speed of1m/s and dearm schell speed of 500 r.p.m. It is recommended for the operators of the manufactured separation machine to operate it at straw moisture content of 10.2%, feeding roller speed of 1 m/s and derma schell speed of 800 r.p.m to obtain the optimum performance. | ||||
| Keywords | ||||
| flax; separating fibers; design; cleaning; consumed energy; machine evaluation | ||||
| References | ||||
|
Anthony, W.S. (2003). Device to separate contaminants from cotton and flax. Article · January 2003 with 20 Reads
Anthony, W.s. (2005). Development of machines to separate fiber and shave from seed flax straw. Applied Engineering in Agriculture. 21(6):1057-1063.
Anthony,W.S.(2002).Separation of fiber from seed flax straw. Applied Engineering in Agriculture 18(2):227-233.
Chancellor, W. J. 1981. Substituting information for energy in agricultural. Trans. ASAE Paper No. 0001- 2351.
Eichhom, S.I.et al. (2001) .Journal of Materials Science. Review Current international research into cellulosic fibres and composites. (36):2107-2131.
Fouda,T.Z.,Badr,S.E.,Derbala,A.A.,andA.E.Elashry(2011). Manufacture and performance evaluation of a local machine for separating flax fibers. Annual Conference of the Misr Soc. Of Ag. Eng. 26-27 October
Ismail(2009). The technological properties of flax fibers and the methods of estimating them, El-Felaha Jour. 46(5): 466-476. (In Arabic).
Lockwood,F.B.and R.Dunstan (1971). Electrical engineering principles. Heinemann Educational Books. Ltd. London.
Mohanty,A.K., M. Misra and L.T.Drzal. (2001). Surface modifications of natural fibers and performance of the resulting biocomposites: An overview. Composite Interfaces 8(5):313-343.
Molloy,R.M. (2000). A study of the plant, fiber and seed development in flax and linseed (linum usitatissimum) grown at a range of seed rates. Journal of Agricultural Science, (135): 361-369.
Oelke, E.S. Johnson, P. Ehrhardt, and V. Comstock, (1987). From flax straw to linen fiber. Agricultural fact sheet 3339.Minncsota Extension Service, University of Minncsota. St. Paul, Minn.
Radwan, B.R.H. and A. Momtaz(1966). The technological properties of flax fibers and the methods of estimating them, El-felaha Jour.46 (5):466-476.(in Arabic). | ||||
|
Statistics Article View: 150 PDF Download: 232 |
||||
