MILK PASTEURIZATION USING SOLAR CONCENTRATOR WITH TRACKING DEVICE | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 9, Volume 33, Issue 3, July 2016, Page 915-932 PDF (852.17 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2016.97753 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M. F. Atia1; M. M. Mostafa2; M. A. El-Nono2; M. F. Abdel-Salam3 | ||||
| 1Assist. Lecturer of Agric. Eng. Dept., Fac. of Agric., Ain Shams University, Egypt. | ||||
| 2Emt. Prof. of Agric. Eng. Dept., Fac. of Agric., Ain Shams University, Egypt. | ||||
| 3Assist. Prof. of Agric. Eng. Dept., Fac. of Agric., Ain Shams University, Egypt. | ||||
| Abstract | ||||
| Milk pasteurization process consumes a large amount of energy, using of solar energy for pasteurization process reduces the required conventional energy. Experimental study was conducted to equip a solar concentrator with dual axis sun tracking device and utilizing it for milk pasteurization. The tracking device was a closed-loop system, it was worked based on the contrast of sunlight levels using light-dependent resistors (LDRs) and op-amp chip. The thermal system was comprised of solar parabolic dish, energy conversion subsystem, and heat exchanger. The system was able to pasteurize about 260 ml of milk at 73 ˚C in average time 110 seconds. The average hourly productivity of solar pasteurized milk was about 7.5 liters. The tracking device was able to track the motion of sun and keep the solar concentrator in a straight axis to the sun, and it had a feature of the low cost. The results indicated that the tracking device was led to increase of the cumulative daily heat gain by approximately 59 %. The temperature of the absorber plate was reached 190 ˚C with the automatic tracked concentrator while it was 91 ˚C with the non-tracked on March 2016. | ||||
| References | ||||
|
ASHRAE (1995). Handbook of HVAC Applications, ch. 30, Atlanta, GA, USA.
ASHRAE (2005). Handbook of Fundamentals, American Society of Heating, Refrigerating and Air Conditioning Engineers, New York.
Atia, M. F., Mostafa, M. M., Abdel-Salam, M. F., and El-Nono, M. A. (2010). Solar energy utilization for milk pasteurization., M.Sc. th. Agric. Eng. Dept., Fac. of Agric., Ain Shams Univ., Egypt.
Bergman, T. L., Incropera, F. P., and Lavine, A. S. (2011). Fundamentals of heat and mass transfer. John Wiley & Sons.
Bairi, A. (1990). Method of quick determination of the angle of slope and the orientation of solar collectors without a sun tracking system. Solar Wind Technol. 7, 327-330.
Braun J. E. and Mitchell J. C. (1983). Solar geometry for fixed and tracking surfaces. Solar Energy;31(5):439–44.
El-Shebley, M.; Ahmed, H. S. and Hetr R. F. (2003). The development of production, processing and marketing to small-scale dairy farmers in the Arab world, AOAD, Arab Organization for Agricultural Development, Sudan.
Franco, J.; Saravia, L.; Javi, V.; Ricardo, C. and Carlos F. (2007). Pasteurization of goat milk using a low cost solar concentrator, Solar Energy J., doi:10.1016/j.solener.2007.10.011, USA.
Kalogirou S., Eleftheriou P., Lloyd S., and Ward J. (1994). Design and performance characteristics of a parabolic-trough solar collector system. Appl Energy;47:341–54.
Kalogirou, S. A. (2004). Solar thermal collectors and applications, Progress in Energy and Combustion Science, 30: 231-295.
Lee, C. Y., Chou, P. C., Chiang, C. M., and Lin, C. F. (2009). Sun tracking systems: a review. Sensors, 9(5), 3875-3890.
Mousazadeh, H., Keyhani, A., Javadi, A., Mobli, H., Abrinia, K., and Sharifi, A. (2009). A review of principle and sun-tracking methods for maximizing solar systems output. Renewable and sustainable energy reviews, 13(8), 1800-1818.
Niamsuwan, S., Kittisupakorn, P., and Mujtaba, I. M. (2011). Optimization approach to minimize energy consumption in pasteurized milk process. International Conference on Chemistry and Chemical Process. Bangkok, Thailand, May 28; 29.
Rauta S. and Singh N., (2009), Non-Conventional energy sources, Department of Electrical Engineering, National Institute of Technology, Rourkela, India. 47-54
Sorensen, B. (2003). Renewable Energy Its physics, engineering, use, environmental impacts, economy and planning aspects, 3rd Elsevier Academic Press, Roskilde Univ., Energy & Environment Group, Ins. 2, Denmark.
Wayua, F. O., Okoth, M. W., and Wangoh, J. (2013). Design and performance assessment of a flat‐plate solar milk pasteurizer for arid pastoral areas of kenya. Journal of Food Processing and Preservation, 37(2), 120-125.
William, B. and Raymond, W. (1985). Solar energy fundamentals and design, John Wiley & Sons, New York, USA.
Zahira, R.; Hafiz, A.; Nasir, A.; Muhammad, A. and Zia-ul-Haq (2009). fabrication and performance study of a solar milk pasteurizer, J. Agri. Sci., Pakistan Vol. 46(2). | ||||
|
Statistics Article View: 352 PDF Download: 392 |
||||
