EFFECT OF RELATION BETWEEN MOISTURE CONTENT AND TERMINAL VELOCITY ON WHEAT AND BARLEY GRAINS | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 12, Volume 33, Issue 3, July 2016, Page 961-970 PDF (498.76 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2016.97786 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M. T. Ebaid1; M. M. Abd El-Rahman1; G. K. Arafa2 | ||||
| 1Prof. , Ag. Eng. Res. Inst., Egypt. | ||||
| 2Senior Res., Ag. Eng. Res. Inst., Egypt. | ||||
| Abstract | ||||
| Terminal velocity (TV) is one of the important aerodynamic properties of materials, including seeds of agricultural crops that are necessary to design of pneumatic conveying systems, fluidized bed dryer and cleaning the product from foreign materials. Among the properties, terminal velocity is very important. This investigation aimed to provide database about the physical properties (length, width, thickness, volume, percent of sphericity, geometric diameter, arithmetic diameter, transverse surface area and flat surface area) and terminal velocity of crop grains at different moisture contents. Two different grains crop were tested such as wheat grains (Sakha 93-variety) and barley (Giza 130-variety). The wheat and barley grains were tested at different moisture contents of 9, 11, 13, 15 and 17 %. The main results in this study can be summarized as follows: -Length, width, and thickness for wheat grains were 6.18, 2.80 and 2.21 mm respectively. Meanwhile, length, width, and thickness for barley grains were 9.85, 2.49 and 3.52 mm respectively. -Volumes for wheat and barley were 30.52 and 45.2 mm3 respectively. -Percents of sphericity for wheat and barley were 62.75 and 44.87% respectively. -Geometric and arithmetic diameters for wheat and barley were 3.88, 4,21 and 4.42, 5.29 mm respectively. -By increasing moisture content of all grains, the terminal velocity increased in general. The highest terminal velocities were 8.53 and 7.8 m/ s for wheat and barley grains respectively at moisture content of 17 %. Meanwhile, the lowest terminal velocities were 7.8 and 6.98 m/ s for wheat and barley grains respectively at moisture content of 9 %. | ||||
| References | ||||
|
-Ali R., A., Tabatabaeefar, A. and Farahani, M., (2006), Effect of Moisture on Terminal Velocity of Wheat Varieties. Int. J. Agri. Biol., Vol. 8, No. 1: 10-13.
-Arora, S. (1991), Physical and aerodynamic properties of rough rice (Oryza sativa). Indian J. Ag. Eng., Vol.1, No.1,:12-22, 2 ref.
-Behroozi-lar M, Mohtasebi SS, and Rabbani H, (2003), Determination of terminal velocity for chickpea, CSAE/SCGR, :03-331.
-Buyanov, A. I. and B. A. Voronyuk (1985), Physical and mechanical properties of plant, Fertilizers and soils.Amerind Pub. Co., PVT., LTD., New Delhi, India.753 P.
-Ebaid M.T., A. A. Abd El-Rhman, and T. Fouda (2003), Determine the terminal velocity for some grain crop and their impurities. Misr. J. Ag. Eng., 20(3): 854-855.
-El-Raie; A. E. S.; N. A. Hendawy and A.Z. Taib, (1996), Study of physical and engineering properties for some agricultural products. Misr. J. Ag. Eng., 13 (1) : 211-226.
-Gorial, B.Y. and J. R. O’Callaghan,(1991), Separation of grain from straw in a vertical airstream. J. Ag. Eng. Res., 48 : 111-122.
-Mohsenin, N. N., (1986), physical properties of plant and animal materials, Gordon and Breach Sc. Pub., N. Y.: 734.
-Nimkar, p. m. and p. k. Chattopadyay. (2001), Some physical properties of green gram. J. of Agr. Eng. Res., 80 (2) :183-189, 17 ref. | ||||
|
Statistics Article View: 225 PDF Download: 243 |
||||
