EFFECT OF DIFFERENT ROOF CONFIGURATIONS ON THERMAL PERFORMANCE OF SOLAR STILLS | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 17, Volume 33, Issue 3, July 2016, Page 1033-1048 PDF (708.31 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2016.97791 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| I. H. El-Sheikh1; S. S. Kishk2 | ||||
| 1Associate Prof. of Agric. Eng. Dep., Fac. of Agric., Suez Canal Univ., 41522 Ismailia, Egypt. | ||||
| 2Lecturer of Agric. Eng. Dep., Fac. of Agric., Suez Canal Univ., 41522 Ismailia, Egypt. | ||||
| Abstract | ||||
| The goal of this study was to evaluate the thermal performance of four identical solar stills with different roof shapes. Four solar stills with similar basin area with different roof glass cover configurations were designed, installed and tested at the Agricultural Engineering Department, Faculty of Agriculture, Suez Canal University, Ismailia Governorate, Egypt (latitude angle of 30.62ºN, Longitude angle of 32.27ºE, and mean altitude above the sea level of 5 m). The solar stills had four different roofs, single slope, downward slanting cover, double slope, and pyramidal shape.The basin of each solar still made of galvanized iron sheet, with a net upper surface area of 0.42 m2. It was painted with matt black paint to absorb the maximum possible amount of solar radiation incident on it. In the bottom and sides of the basin, 0.03 m of Styrofoam insulation was placed to reduce the heat losses. The obtained results indicated that the productivity of four solar stills was 116, 107, 84 and 72 ml/hr with average thermal efficiency of 33.7, 31.0, 24.7 and 21.2% for the single slope, downward slanting, double slope, and pyramidal roofs, respectively. | ||||
| References | ||||
|
Abd Elkader, M. (1998) "An investigation of the parameters involved in simple solar still with inclined yute" Renew Energy, 14: 333–338
Abdallah, S.; and Badran, O. O. (2008) "Sun tracking system for productivity enhancement of solar still" Desalination, 220: 669–676
Arjunan1, T. V.; Aybar, H. S.; Nedunchezhian, N.; and Sakthivel, M. (2009) "Effect of Blue Metal Stones on the Performance of a Conventional Solar Still" Journal of Convergence in Engineering, Technology and Science, 1: 17–22
Arunkumara, T.; Jayaprakasha, R.; and Ahsanb, A. (2012) "A comparative experimental testing in enhancement of the efficiency of pyramid solar still and hemispherical solar still" International Journal of Renewable Energy, 7: 2
ASHRAE, (2005) "Handbook of Fundamentals" American Society of Heating, Refrigerating and Air Conditioning Engineers, New York, USA
Duffie, J. A.; and Beckman, W. A. (2006) "Solar Engineering of Thermal Processes" New York, N.Y., John Wiley and Sons
Eze, J. I.; and Ojike, O. (2012) "Comparative evaluation of rectangular and pyramid-shaped solar stills using saline water" International Journal of the Physical Sciences, 7, 31: 5202-5208
Fath, H. E. S.; El-Samanoudy, M.; Fahmy, K.; and Hassabou, A. (2003) "Thermal-economic analysis and comparison between pyramid-shaped and single slope solar still configurations" Desalination, 159: 69-79
Goosen, M. F. A.; Sablani, S. S.; Shayya, W. H.; Paton, C.; and Al-Hinai, H. (2000) "Thermodynamic and economic considerations in solar desalination" Desalination, 129: 63-89
Hashim, A. Y.; Al-Asadi, J. M.; and Alramdhan, W. A. T. (2010) "An attempt to solar still productivity optimization; solar still shape, glass cover inclination and inner surface area of a single basin solar still, optimization" Basrah Journal of Scienec, 28, 1: 39-48
Kabeel, A. E.; Hamed, A. M.; and El-Agouz, S. A. (2010) "Cost analysis different solar still configurations" Energy, 35: 2901-2908
Malaeb, L.; Ayoub, G. M.; and Al-Hindic, M. (2014) "The effect of cover geometry on the productivity of a modified solar still desalination unit" Energy Procedia, 50: 406-413
Murugavel, K. K.; Chockalingam, Kn. K. S. K.; and Srithar, K. (2008) "Progresses in improving the effectiveness of the single basin passive solar still" Desalination, 220: 677-686
Rajesh, T.; and Tiwari, G. N. (2005) "Effect of water depth on internal heat and mass transfer for active solar distillation" Desalination, 173: 187-200.
Sakthivel, M.; Shanmugasundaram S.; and Alwarsamy, T. (2010) "An experimental study on a regenerative solar still with energy storage medium Jute cloth" Desalination, 264: 24-31
Singh, H. N.; and Tiwari, G. N. (2004) "Monthly performance of passive and active solar stills for different Indian climatic conditions" Desalination, 168: 145-150 | ||||
|
Statistics Article View: 107 PDF Download: 166 |
||||
