EVALUATION OF A SIMPLE MANUALY OPERATED PLANTING UNIT SUITABLE FOR SLOPING LANDS | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 2, Volume 33, Issue 1, January 2016, Page 13-28 PDF (588.54 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2016.98018 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| M. M. I. Khater | ||||
| Soil Conservation Department, Desert Research Center, Cairo, Egypt. | ||||
| Abstract | ||||
| The idea to cultivate the grass seeds into the soil by trenches and conserve rain water was identified by using a simple manually operated planting unit to be easy using four sloping lands which were 4.8, 6.6, 8.6 and 10.4 % under experimented area in arid conditions to cultivate Rhodes grass. The laboratory investigation included determination of the rate of seed discharge, uniformity of seed spacing and seed damage during operation. The obtained data revealed that soil moisture content measured from the manually operated planting unit had the highest values during growth season and can be ranked as 4.8% > 6.6% > 8.6% > 10.4% land slopes. Also, the soil moisture content values after 40 days of planting date were higher than that obtained after 3 days. The highest values of soil moisture content were 25.53 and 36.26 % for manually operated planting unit under 4.8% land slope treatment after 3 and 40 days of planting date respectively. On the other hand, the yield values revealed that the manually operated planting unit had the highest record. The highest biological yield value was 92.447 Mg/ha by using manually operated planting unit with land slope of 4.8%. The lowest biological yield value was 48.059 Mg/ha by using of hand labor planting method with land slope of 10.4% treatment. | ||||
| Keywords | ||||
| manually operated planting unit; soil moisture content; seed germination; yield | ||||
| References | ||||
|
Adekoya, L. O., and W. F. Buchele.(1987). A precision punch planter for use in tilled and untilled soils. J. Agric. Eng. Res. 37:171-8.
Adisa A.F. (1980). Design and Construction of a Manualy Operated Planter. Unpublished B.Eng. Thesis, Ahmadu Bello University, Zaria, Nigeria. Bamgboye, A.I and Mofolasayo, A.S (2006). “Performance Evaluation of a Two-Row Okra Planter”. Agricultural Engineering International: the CIGR Ejamal. Manuscript PM 06002. Vol.viii. July. Braide F.G. and S.M. Njidda. (1989). Design and Construction of a Combined Jab Planter, Proceedings of Nigerian Society of Agricultural Engineers (13). Hilary F. R.and F. Gary (1995). Microcatchment Water harvesting for agricultural production: Part I: Physical and technical considerations. J. Ranglands, 17 (3): 72-78.
Kachman, S. D., and J. A. Smith. (1995). Alternative measures of accuracy in plant spacing for planters using single seed metering. Transactions of the ASAE 38(2):379-387.
Kepner, R.A; Bainer, R. and Barger, E.L. (1978). Principles of farm machinery. 3rd Edition. West port. G; AVI publishing company Inc. Klute, A. (ed.) (1986). Methods of Soil Analysis. Part 1. Physical and Minerological Properties. Am. Soc. Agron. Inc., Agronomy Series 9. USA. 1173 pp.
Mehta, M.L.; Verma, S. R. Misra, S.K. and Sharma, V.K. (1995). Testing and Evaluation of Agricultural Machinery. National Agricultural Technology Information Centre, India. Pp 68 – 79.
Molin, J.P. and Dagostine, V. (1996). Development of a rolling punch planter for stony soil conditions” Agricultural mechanization in Asia, Africa and Latin America. Vol.27, No3, pp17-19. Morrison Jr., J. E., and R. R. Allen. (1987). Planter and drill requirements for soil with surface residues. Paper presented at the Southern Region No-tillage Conf. on Conservation Tillage, Misc-Pub-MP-Agri-Exp-Stn (1636): 44-58. College Station.
Nadia, I. and M. Pavia (2007). Rain water harvesting technologies for Small scale rainfed agriculture in arid and semi-arid areas, Integrated water resources management for improved rural livelihoods, CGIAR challenge program on water and food.
Robert, G.; H. David and P. Robert (2009). Equipment Considerations for No-till Soybean Seeding. Virginia Cooperative Extension Programs. publication 442-456.
Rogers, B., and R. Baron. (1987). Cereal punch seeder; true zero till seeding. ASAE Paper No. 87-1615. St. Joseph, Mich.: ASAE.
Rolando, P.J., Delaraga, L.V., Alegato, O.R. (2011). Development of a manually operated Disc- type corn seeder. Northwestern University, Laoag City 2900, Philippines, Mariano Marcos State University, Batac, Ilocos Norte 2906, Philippines. Shaw, L. N., and K. H. Kromer. (1989). A punch planter for vegetables on plastic mulch covered beds. In Proc. 11th Intnl. Congress Agric. Engineering, Vol. 3, Agricultural Mechanization, 1711-1715. Dublin Ireland. Rotterdam, The Netherlands: A. A. Balkema.
Srivastava, A. K., and M. E. Anibal. (1981). A punch planter for conservation tillage. ASAE Paper No. 81-1020. St. Joseph, Mich.: ASAE.
Steel, R. G. D., and J. H. Torrie. (1980). Principles and Procedures of Statistics. McGraw-Hill, New York.
Wohab, M.A. (2003). Design and development of a power tiller operated minimum tillage seeder. MS thesis. Department of Farm Power and Machinery, Bangladesh Agricultural University, Mymensingh, Bangladesh. | ||||
|
Statistics Article View: 133 PDF Download: 183 |
||||
