THERMAL PERFORMANCE OF AN EXPERIMENTAL CAR-TIRE SOLAR COOKER | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 5, Volume 33, Issue 1, January 2016, Page 63-74 PDF (790.99 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2016.98155 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Hanan, M. S. El-Shal | ||||
| Lecturer, Agric. Eng. Dept., Fac. of Agric., Zagazig Univ., Egypt. | ||||
| Abstract | ||||
| The aim of this study is evaluating the thermal performance of a simple and inexpensive solar cooker that made locally using the car-tire.The practical experiments were carried out under the local climatic conditions of Zagazig city, Egypt (Lat. 30° 35\ N and Lon. 30° 31\ E) for comparing the thermal performance of an ordinary tire-solar cooker (without mirror) and another one provided with booster mirror. The obtained results revealed that, the boosted cooker with mirror achieved stagnation temperature of about 10% more than the ordinary tire-cooker and faster by about 40 minutes with first figure of merit (F1)of 0.12 °C.m2/W ,whereas the ordinary was 0.10°C.m2/W at solar radiation 565 W/m2. Also, by increasing the mass of water from 0.5 to 1.5 kg the maximum temperature of water decreased from 87 to 75 °C and from 93 to 84°C for the ordinary and the boosted tire-cooker, respectively. Also, the use of boosted cooker was achieved the boiling temperature (~90°C) for the water mass of 0.50 and 1 kg as 93 and 91 °C, respectively but the ordinary cooker could not reach the boiling temperature at all masses of water under the same climate .The boosted cooker with mirror achieved higher utilizable efficiency (30.46%) than the ordinary one by about 20% at the maximum water mass of 1.50 kg and this cooker with aperture area of 1 m2 can boil 1 kg of water in about 16 min at utilizable efficiency of about 26%.Hence, the use the proposed boosted tire-solar cooker can achieve a good thermal performance from small aperture area. | ||||
| Keywords | ||||
| thermal performance; solar cooker; old car-tire; booster mirror; aperture area | ||||
| References | ||||
|
Abu-Khader, M.; M. Abu Hilal; S. Abdallah and O. Badran (2011) Evaluating thermal performance of solar cookers under Jordanian climate. Jordan Journal of Mechanical and Industrial Engineering, 5(1):107-112 Cuce, E. and P. M. Cuce (2013) A comprehensive review on solar cookers. Applied Energy. 102 : 1399–1421.
Funk, P.A. (2000) Evaluating the international standard procedure for testing solar cookers and reporting performance. Solar Energy , 68(1): 1–7.
Garg, H.P. and J. Prakash (2004) Solar energy fundamentals and applications. Tata McGraw Hill Publications.
Kurt, H.; E. Deniz and Z. Recebli (2008) An investigation into the effects of box geometries on the thermal performance of solar cookers. Int J Green Energy, 25(6):508–519.
Mullick, S. C.; T.C. Kandpal, and S. Kumar (1996) Testing of box-type solar cooker: second figure of merit F2 and its variation with load and number of pots. Solar Energy, 57(5): 409– 413.
Mullick, S.C.; T.C. Kandpal and A.K. Saxena (1987) Thermal test procedure for box-type solar cookers. Solar Energy, 39(4):353–60.
Narasimha Rao, A.V. and S. Subramanyam (2005) Solar cookers – part II: cooking vessel with central annular cavity. Solar Energy, 78:19–22.
Olwi, I. A. and A.M.A. Khalifa (1993) Numerical modeling and experimental testing of a solar grill. Journal of Solar Energy Engineering, 115(2):5-10.
Saxena, A.; S.P. Varun and G. Srivastav (2011) A thermodynamic review on solar box type cookers.Renewable and Sustainable Energy Reviews, 15: 3301– 3318.
Wentzel M. and A. Pouris (2007) The development impact of solar cookers: a review of solar cooking impact research in South Africa. Energy Policy, 35: 1909–1919. | ||||
|
Statistics Article View: 112 PDF Download: 183 |
||||
