MANUFACTURING A SMALL MACHINE TO SUIT TOPPING SUGAR BEET | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 4, Volume 31, Issue 4, October 2014, Page 1291-1316 PDF (1.2 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2014.98239 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Samir Tayel1; Mohamed Fayed A. Khairy 2; O. M. Kamel3; A. S. El-Shazly4
| ||||
| 1Prof., Fac. of Ag. Eng. – Al-Azhar Univ., Cairo, Egypt. | ||||
| 2Ag. Machinery & Power Eng. Dept., Faculty of Ag. Eng., Al-Azhar U., Cairo, Egypt. | ||||
| 3Prof. of Agric- Agric. Eng. Res. Inst., Giza, Egypt. | ||||
| 4graduate student- Agric. Eng. Res. Inst., Giza, Egypt. | ||||
| Abstract | ||||
| The experiments are to carried out in Rice Mechanization Center, Meet El-Deeba, Kafr El Sheikh Governorate. Field experiments are to be carried out to evaluate the performance of the manufactured topping unit at the following topper three forward speeds of 1.5, 2.0, and 2.5km/h, three topping heights of 2, 4, and 6cm, the clearance can be adjusted between the knife and the feeler.(Level vertical and horizontally), (clearance between knife and feeler wheel), and three sugar beet moisture content of 50.0, 42.0 and 35.0 %. Theoretical field capacity, actual field capacity, field efficiency, fuel consumption, power requirements, energy requirements, topping performance and topping cost operation (transplanter, unit topper and labor costs) product losses cost (losses price) were studied to evaluate topping performance. | ||||
| References | ||||
|
Allam, A.I.; A.H. Nour and M.A. Farag (1988). Prospective of sugar beet mechanical growing. Agric. Res. Review. Agric. Res. Center, Giza Egypt, 66 (3) : 537-543.
Awad, M.A.(2006). Developing of a pulling out mechanism for harvesting sugar beet crop. Ph.D. Thesis. Agric.Eng.Dept., Fac.Agric., Mansoura Univ: 28-112.
Culpin, C. (1986). Farm machinery. Handbook. 11th ed. AM. Dip. Ag. (Contab.), Flange Collins and Grafton, London, W1: 252-257.
El-Bialee, N.M.Y. (2009). Development of sugar beet harvester to suit Egyptian condition. Ph.D.Thesis, Agric. Mech.Dept., Fac. of Agric. Al-Azhar univ. Cairo.
El-Khateeb,H.A and N.M. Awad (2006). The mechanical performance of sugar beet topper. Egypt J. Agric. Res., 84 (1) : 111-128.
Hunt, D.R. (1983). Farm power and machinery management. Iowa state univ. Press AMES, Iowa, U.S.A.
Ibrahim,M.M.; H.N.Abdel-Mageed and A.E.Khater (2010). Factors affecting on topping efficiency and quality of sugar beet crop. The 5th Arab Mansoura Conference of Food and Dairy Science & Technology 18-22 October 2010. Mansoura Univ. J. of Agric. Sci., 35 (8) : 810-825.
Kamel, O. and El-Khateeb, H.A. (2002). Performance evaluation of two different system of rice transplanter under Egyptian conditions. Egypt J.Agric.Res., 80 (3) : 1317-1335.
Srivastava, N.S. and R.M.Yadav (1979). Mechanizing sugar beet cultivation in India. The Agric. Eng. In India, 21: 35-38.
Suliman, A.E.; G.E. Nasr and W.M. Awady (1993).A study an the effect of different systems of tillage on physical properties of the soil.. Misr J. Ag .Eng., 10 (2): 169-189.
Tayel, S.A. (1990). A mechanized sugar beet system for small farms. Final Report National Agric Res. Proj., NARP, Fac. of Agric. Al-Azhar Univ., : 76.
Tayel, S.A.; M.F. Wahby and M.F. Khairy (1988). Effect of soil preparation on the physical and mechanical properties of sugar beet. Misr J. Ag .Eng., 5 (3): 357-366.
Visvanthan, R.; V.Sreenayanan and K.R. Swaminathan (1996). Effect of knife angle and velocity on the energy required to cut cassava tubers. J.Agric. Eng.Res., 64 : 99-102.
Younis, S.M. (1987). Mechanization of potato harvesting with minimum losses. Alexandria J. Agric. Res., 32 (3) : 1-10.
Zaalouk, A.K. (1994).Sugar beet harvesting mechanization. M.Sc. Thesis, Fac. of Agric. Agric Eng.Dept. Al-Azhar Univ. | ||||
|
Statistics Article View: 162 PDF Download: 239 |
||||
