MANUFACTURE AND PERFORMANCE EVALUATION OF A HORIZONTAL SINGLE-PASS ANIMAL FEED PELLETS COOLER
Morad, M., El-Maghawry, H. (2015). MANUFACTURE AND PERFORMANCE EVALUATION OF A HORIZONTAL SINGLE-PASS ANIMAL FEED PELLETS COOLER. EKB Journal Management System, 32(3), 1185-1202. doi: 10.21608/mjae.2015.98271
M. M. Morad; Hend A. M. El-Maghawry. "MANUFACTURE AND PERFORMANCE EVALUATION OF A HORIZONTAL SINGLE-PASS ANIMAL FEED PELLETS COOLER". EKB Journal Management System, 32, 3, 2015, 1185-1202. doi: 10.21608/mjae.2015.98271
Morad, M., El-Maghawry, H. (2015). 'MANUFACTURE AND PERFORMANCE EVALUATION OF A HORIZONTAL SINGLE-PASS ANIMAL FEED PELLETS COOLER', EKB Journal Management System, 32(3), pp. 1185-1202. doi: 10.21608/mjae.2015.98271
Morad, M., El-Maghawry, H. MANUFACTURE AND PERFORMANCE EVALUATION OF A HORIZONTAL SINGLE-PASS ANIMAL FEED PELLETS COOLER. EKB Journal Management System, 2015; 32(3): 1185-1202. doi: 10.21608/mjae.2015.98271

MANUFACTURE AND PERFORMANCE EVALUATION OF A HORIZONTAL SINGLE-PASS ANIMAL FEED PELLETS COOLER

Misr Journal of Agricultural Engineering
Article 14, Volume 32, Issue 3, July 2015, Page 1185-1202  XML PDF (669.64 K)
Document Type: Original Article
DOI: 10.21608/mjae.2015.98271
View on SCiNiTO View on SCiNiTO
Authors
M. M. Morad1; Hend A. M. El-Maghawry2
1Prof. and Head of Ag. Eng. Dept., Fac. of Ag., Zagazig Univ., Egypt.
2Lecturer of Ag. Eng., Ag. Eng. Dept., Fac. of Ag., Zagazig Univ., Egypt.
Abstract
The present research was carried out to manufacture and evaluate the performance of a horizontal single-pass animal feed pellets cooler to improve product quality. The cooler performance was studied as a function of change in pellets feed rate, conveyor chain speed and airflow rate. Performance evaluation of the horizontal cooler was carried out in terms of final pellets moisture content, cooling efficiency, pellets durability, energy requirements and cooling cost.
The experimental results revealed that final pellets moisture content, cooling efficiency, pellets durability, energy requirements and cooling cost are in the optimum region under the following conditions:
-          Pellets feed rate of 2.2 Mg/h,
-          Conveyor chain speed of 2 cm/s,
-          Airflow rate of 12 m3/s.
References
AACC. (2000). Approved Methods of AACC, 10th Ed., American Association of Cereal Chemists, St. Paul, MN.

Andersson, D. and D. Johansson (2008). Mathematical model for countercurrent feed pellet cooler. M. Sc. Thesis. Chalmers of University Technology.  Göteborg, Sweden.

Brooker, D.B., F.W. Bakker-Arkema, and C. W. Hall. (1992). Drying and Storage of Grains and Oilseeds. Van Nostrand Reinhold. New York, NY.

Harper, Allen. (1998). The importance of pellet quality in hog feeding. Livestock Update.

                Available at: http://www.ext.vt.edu/news/periodicals/livestock/aps-98_09/aps-969.html.

Heldman, D.R. and D.B. Lund. (2007). Handbook of Food Engineering. Second Edition. CRC Press. Boca Raton, FL.

Kaddour, O. and S.  Alavi (2010). Manufacture and evaluation of a single-pass rotary cooler for aquatic feed pellets. Journal of Food Process Engineering 33: 585–605.

Maier, D.E. (1988). The counterflow cooling of feed pellets. M.S. Thesis. MichiganStateUniversity. East Lansing, MI.

Steven L. F. (2008). Optimal sizing of a counterflow cooler for feed pellets. M.S. Thesis. Oklahoma State Univ. Stillwater, Oklahoma.

Statistics
Article View: 130
PDF Download: 165