DEVELOPMENT AND EVALUATION OF A TANGENTIAL HONEY - EXTRACTOR | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 16, Volume 31, Issue 4, October 2014, Page 1501-1522 PDF (1.27 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2014.98404 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| M. A. Al-Rajhi1; A. M. A. EL-Sheikha2 | ||||
| 1Researcher, Agric. Eng. Res. Institute, ARC., Egypt. | ||||
| 2Lec. Agric. Eng., Fac. Agric. Damietta Univ., Egypt. | ||||
| Abstract | ||||
| The honey extractor is an essential equipment, which any bee-keeper should have in order to extract the maximum quantity of honey from the combs. The tangential position of the combs inside the extractor is used for extracting the honey centrifugally by spinning honey out of the honeycombs after they have been uncapped. Honey is usually extracted by a manual extractor, which requires lots of effort and time. The main objectives of this study were to improve a four comb manual extractor by converting it into an electric one with a safety break unit that handles 8 combs at once in order to extract big amounts of honey in a short period of time. Some physical characteristics such as moisture content, density, and viscosity of honey collected form three kinds of plants (alfalfa, cotton and citrus) were considered in this study. The effect of wax type (artificial paraffin wax and natural beeswax) and combs thickness and mass on the extracted honey was also investigated in this study. The mean moisture contents, density and viscosity at 25 °C for honey collected form citrus, alfalfa and cotton were (18.10 , 16.98 and 14.74 %); (1.40, 1.41, 1.43 g/cm3) and (48.10, 69.03 and 137.96 poises), respectively. The mean density of the artificial paraffin wax and natural beeswax were 0.91 and 0.98 g/cm3 respectively .The mean thicknesses and mass for combs collected from (alfalfa, cotton and citrus) were (3.91, 3.79 and 3.57 cm) and (1707.46, 1640.50 and 1156.50 g), respectively. The extractor was constructed to operate manually and electrically, which can be installed and operated at home or at the farm where breeding of honey bees is possible. The evaluation included two operation modes (manual and electric); three ages of honeycombs (used for 1, 2 and 3 years); three extracting times (08.00 am, 11.00 am and 02.00 pm); and five extraction speeds [5.70, 12.56, 14.65, 17.58 and 21.98 m/s]. It was observed that the maximum value of extracting efficiency was achieved with the electric extractor for, honeycombs used for 3 years, at 02.00 pm and at an extraction speed of 21.98 m/s. The maximum value of extracting capacity was achieved with electric extractor for, honeycombs used for 2 years; at 02.00 pm and at an extraction speed of 21.98 m/s. Minimum value of broken honeycombs was achieved with the electric extractor for the, honeycombs used for 3 years, if extracted at 08.00 am and at a speed of 12.56 m/s. | ||||
| Keywords | ||||
| ycombs development; evaluation; centrifugal; honey extractor; physical characteristics; hone | ||||
| References | ||||
|
Adebiyi, F.M.; Akpan, I.; Obiajunwa, E.I. and Olaniyi, H.B. (2004). Chemical/physical characterisation of Nigerian honey Pakstan Journal of Nutrition 3(5), 278-281.
Andrew, B.; Benard, E.; Nicholas, B.; Siphuel, A. and Nicholas, T. (2004). Quality evaluation of honey harvested from selected areas of Tanzania with special emphasis on hydroxymethyl furfural (HMF) levels. Journal of Plant Foods for Human Nutrition 15, 75-95.
AOAC, (1990). Official methods of analysis, Acidity of Honey pp 962-1033.
Bhandari, B.; D‟arcy, B. and Chow, S. (1999). Rheology of selected Australian honeys. Journal of Food Engineering 41, 65–68.
Bogdanov S, Martin P, Lüllmann C (1997). Harmonised methods of the European Honey Commission. Apidologie, Extra issue pp. 1-59.
Breadbear N (2009). Bees and their role in forest livelihoods: A guide to the services provided by bees and the sustainable harvesting, processing and marketing of their products. Non Wood Forest Products 19. Food Agric. Organ. United Nations. Rome, p. 204.
Codex Alimentarius Commission (2001). Rapport de la 7e session du comité sur les sucres. Programme mixte FAO/OMS sur les norms alimentaires, p. 31.
Crane, E. (1979). Honey: A comprehensive survey. Henemann, London UK. pp 25-125.
David Cramp , 2008. A PRACTICAL MANUAL OF BEEKEEPING. British Library Cataloguing in Publication Data. First published in electronic form 2008.
FAO, (1996). Value added products from beekeeping. FAO Agricultural Services Bulletin. Rome, Italy: FAO. No. 120 (2), 20-29, 46-55.
FAO, (2004). Agricultural Services Bulletin, No. 124 (2), 22-25, 26-28.
International Honey Commission, (2002). Honey quality, methods of analysis and international regulatory standards. pp 2-35.
Faostat. FAO. Org, (2012).http://faostat.fao.org/site/569/DesktopDefault.aspx? PageID= 569#ancor Internet research in 01/03/2014.
Jasim, A.; Prabhu, S.T.; Raghavan, G.S.V.;and Ngadi, M. (2007). Physico-chemical, rheological, calorimetric and dielectric behavior of selected Indian honey. Journal of Food Engineering 79, 1207-1213.
Jeff R. (2002). “Honey from source to sale & Show – bench,” (Northen Bee Books) pp 10-79.
Meda, A., Charles E.L., Marco, R., Jeanne, M., Odile G.N. (2005), Determination of the total phenolic, flavonoid and proline contents in Burkina Fasan honey, as well as their radical scavenging activity. Food Chemistry 91, 571 – 577.
Minitab Reference Manuel (release 15), Minitab Inc. State University Michigan.
Moar, N. T. (1985). Analysis of New Zealand honey. New Zealand Journal of Agricultural Research 28, 39-70.
Mossel B; Bandari B; D‟Arcy B. and Caffin N. (2000). Use of an Arrhenius model to predict rheological behaviour in some Australian honeys, pp 545–552.
Nagai, T; Inoue, R; Inoue, H. and Suzuki, N. (2002). Scavenging capacities of pollen extracts from Cistus ladaniferus on autoxidation, superoxide radicals, hydroxyl radicals and DPPH radicals. Nutrition Research 22, 519-526.
Nanda, V.; Sarkar, B.; Sharma, H. and Bawa, A. (2003). Physicochemical properties and estimation of mineral content in honey produced from different plants in Northern India. Journal of Food Composition and Analysis 16, 613-619.
Ouchemoukh, S; Hayette, L. and Paul, S. (2007). Physicochemical characteristics and pollen spectrum of some Algerian honeys. Journal of Food Control 18, 52-58.
Pridal, A. and Vorlova, L. (2002). Honey and its physical parameters, Czech. Journal of Animal Science 47(10), 439-444.
Ricciardelli, D and Albore, G. (1998). Mediterranean Melissopalynology. Perugia: Institute of Agriculture Entomology, University of Perugia, pp 32 -43.
Smmataro, D. and Alphonse, A., 1986. The Beekeepers Handbook, New York, Macmillian.
Sanford, M. T., 2000. Working smarter, not harder: Apicultural productivity in the 21st century. Apis Newsletter; 18(10).
Sato, T. and Mayata, G. (2000). The nutraceutical benefit, part II: Honey, Nutrition 16, 468-469.
Sopade, P.; Halley, P.; Bhandari, B.; D‟Arcy, B.; Doebler, C. and Caffin, N. (2003). Application of the Williams-Landel-Ferry model to the viscosity-tempareture relationship of Australian honeys. Journal of Food Engineering 56, 67-75.
Terrab, A.; Angeles, F; Recamales, D.H.; Francisco, S and Heredia, J. (2004). Characterisation of Spanish thyme honeys by their physicochemical characteristics and mineral contents. Journal of Food Chemistry 88,537–542.
Terrab, A.; Diez ,M.J. and Heredia, F.J. (2002). Characterization of Moroccan unifloral honeys by their physicochemical characteristics. Journal of Food chemistry 79, 373–379.
Weaver, M. and Weaver B., 2000. Seaver’s Delaware pollination business. Have bees will travel, American Bee Journal, 139(7).
Wedmore, E.B. (1955). The accurate determination of the water content of honeys bee World 36, 197-206.
White, J.W. (1975). Honey. The hive and the honeybee. (Ed Grout R.A) Hamiliton Illinois, pp. 625-646.
Yanniotis, S.; Skaltsi, S. and Karaburnioti, S. (2006). Effect of moisture content on the viscosity of honey at different temperatures. Journal of Food Engineering 72, 372-377. | ||||
|
Statistics Article View: 489 PDF Download: 946 |
||||
