MODIFICATION OF SEMI-AUTOMATIC TRANSPLANTER FOR COTTON SEEDLINGS | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 1, Volume 32, Issue 2, April 2015, Page 393-412 PDF (1.19 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2015.98571 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| A.E El-Yamani; M.A. Khodeir; M.A. Hassan | ||||
| Ag. Eng. Res. Inst., (AEnRI) Giza, Egypt. | ||||
| Abstract | ||||
| The experiments were carried out during 2014 seasons at Sakha-farm research to evaluate performance of modification transplanter for cotton seedling. The experiments were conducted using a modification transplanter to evaluate the effect of forward speed of 1.88, 2.35, 2.95 and 3.38 km/h, hill spacing of 0.15, 0.2, 0.25 and 0.3 m and planting depth of 8, 10, 12, 15 cm. the present work was used to study the effect of previous variables on effective field capacity, field efficiency, longitudinal and transverse seed scattering, ground wheel slip, germination ratio, seedling miss index, the seedlings multiples index, the quality of feed index, the amount of seedling rate and crop yield. Also, determination of specific fuel consumption, operating and criterion function cost of cotton transplanting were done. Results illustrated that by increasing planting forward speed actual field capacity, affective field efficiency, both of longitudinal and transverse scattering, slip ratio, seedling miss index, the quality of feed index and criterion function cost were increased. While, seedling multiple index, specific fuel consumption, productivity and total operation cost were decreased. Maximum of effective field capacity, field efficiency, productivity, specific fuel consumption and the quality of feed index were 0.739 fed/h, 83.1%,7.61 kantar/fed, 0.731 L/kW.h and 92.3% respectively. While, minimum of longitudinal scattering, transverse scattering, slip ratio, seedling miss index was and seedling multiple index were 0.016 m, 0.010 m, 7.42%, 2.1% and 4.0% respectively. The optimum operation condition of machine transplanting was obtained at forward speed of 2.95 km/h, hill spacing of 0.25 m and planting depth of 8 cm. | ||||
| Keywords | ||||
| cotton transplanted; seedling scattering; seedling miss index; the seedlings multiples index; the quality of feed index; specific fuel consumption; operating and criterion function cost of cotton transplanting | ||||
| References | ||||
|
ASAE Standards. (1989). Agricultural Machinery Management ASAE standards, Ep 391, 1, and 230, 4.
Awady, M.N.(1992). Farm machines. Textbook, Col. of Agric. Ain Shams Univ.; 120 p.
Dong, H.Z.; D.M., Zhang; W., Tang; W.J., Li and Z.H., Li (2005). Effects of planting system, plant density and flower removal on yield and quality of hybrid seed in cotton. Field Crops Res. 93, 74-84.
El-Fowal, Y.A.A. (1996). Astudy on possibilities of mechanical wheat transplanting. M.Sc. Th., Fac. Agric., Al-Azhar Univ., Egypt.
EL-Sayed. E.A.S. (1992). Effect of transplanting on growth and yield of cotton. M.Sc. Th., Tanta Univ., Egypt.
El-Sahrigi, A.F.; A.S., Kamel and S.I., El-Khatib (2001). A study on mechanization of cotton transplanting. Egypt J. Agric. Res. 79, 740-756.
El-Sahrigi, A.F.; M.M., Ibrahim and K. S., Hegazy. (1991). The possibility of Utilizing mechanical planting of onion crop under Egyptian Conditions, Misr J. Agric. Eng. 8(3): 162-171.
Greer, N.W.; K.S., Mclean; and J.W., Kloepper (2003). Potential of cotton transplants and rhizobacteria to shorten the growing season. In: Proceedings of the Beltwide Cotton Conference, pp. 13-16.
Hammed , S.A.; M.A., Ali; A.M. khalifa and A.M., Ismail (1993). A manual Feeding rice transplanter. J. Agric. Sci., Mansoura Univ. 8(1): 72- 80.
Harb, S.K.; H.A., Abdell–Mawal and G.M., Salama (1993). Comparison between mechanichal and manual transplanting of tomato. Minia J. of Agric. Res. Vol. 15 (1): 361-375.
Hassan, I.S.M.; H.B., Abou-Tour and S.M., Seyam (2006). Evaluation and stability parameters of the hybrid G.84 (G.74×G.68) and four Egyptian extra-long staple cotton cultivars grown at North Delta, Egypt. J. of Appl. Sci. 21(8):59-73.
Hunt, D. (1983). Farm power and machinery management. 8th Ed. Iowa state Univ., Press Ames, Iowa, USA: 364-368.
Karve, A.D. (2003). High yield of rain fed cotton through transplanting. Curr. Sci. 84, 974-975.
Konosuke TSUGA, (2000). Development of fully automatic vegetable transplanter. JARQ, 34, 21-28.
Salama, G.M.; A.M., Youssef and S.S.A., Farge (1995). Tomato plant growth and productivity as affected by method transplanting. Vegetable Res. Section. Hort. Res. Inst.. Agric. Res. Center. Cairo, Egypt,22(2): 109-115.
Sales, E.; R., Kanhonou and C., Baixauli (2006). Sowing date, transplanting, plant density and nitrogen fertilization affect indigo production from Isatis species in a Mediterranean region of Spain. Ind. Crops Prod. 23, 29-39.
Sherif, M.N.; M.S.M, Selim and A.S., Kamel (1995). Studies on some factors affecting seed and fiber properties of transplanted cotton. Ann. Agric. Sci. Moshtohor, 33, 647-657.
Srivastava, A.K; C.E.Goering and R.P.Rohrbach (1994). Engineering principles of Agricultural machines. ASAE textbook No. 6 published The ASAE
Stell, R.G. and S.H., Torrie (1980). Principles and procedures of statistics. McGraw- Hill Company, N.Y.
Suliman,A.E.; G.E., Nasr and W.M., Adawy (1993). A study on the effect of different systems of tillage on physical properties of the soil. Misr J.Ag.Eng.,10(2):169-189. | ||||
|
Statistics Article View: 119 PDF Download: 190 |
||||
