Design of a Smart Push Pull Inverter Coupled with Photovoltaic System. | ||||
MEJ- Mansoura Engineering Journal | ||||
Article 10, Volume 41, Issue 2, June 2016, Page 11-19 PDF (1.38 MB) | ||||
Document Type: Research Studies | ||||
DOI: 10.21608/bfemu.2020.98789 | ||||
View on SCiNiTO | ||||
Authors | ||||
Eid Abdelbaki Gouda1; Ahmed Ramadan Abdelhaleim 2; Saad Saad El Sayed Eskander3 | ||||
1Electrical Engineering Department, Mansoura University, Faculty of Engineering, Mansoura, P.O. Box 35516, Egypt | ||||
2Assistant Lecturer at Electrical engineering department, Mansoura University | ||||
3Prof. at Electrical engineering department, Mansoura University | ||||
Abstract | ||||
Although the photovoltaic (PV) system plays an important role to meet our needs of an electrical energy, it represents a direct current (DC) source. So, it is not suitable for alternating current (AC) residential loads. This paper proposes a design and practical implementation for a smart single phase low cost inverter, which could be an effective solution to reduce the overall cost of the PV system and supply AC loads. The low cost inverter is achieved by designing low cost control and power circuits. In the power circuit, PV modules operate near the maximum power point (MPP) and supply AC load requirements through the inverter switches. The control circuit uses a microcontroller which provides a smart system for interaction with the user and remote control and monitoring, in addition to use a digital control to maintain the AC output voltage at the required value. | ||||
Keywords | ||||
Inverter; Microcontroller; MPP and Smart System | ||||
Statistics Article View: 134 PDF Download: 543 |
||||