Enhancing Carbonation Process during Carbon Dioxide Capturing Applying Jetting Fountain Fluidized Bed. | ||||
| MEJ- Mansoura Engineering Journal | ||||
| Article 3, Volume 41, Issue 1, March 2016, Page 1-8 PDF (971.27 K) | ||||
| Document Type: Research Studies | ||||
| DOI: 10.21608/bfemu.2020.99339 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
Ahmed A. Alabeedy  1; Ahmed Abd-Elsalam Hegazi2; Farouk Mohamed Okasha1
| ||||
| 1Mechanical power engineering Dept., Faculty of engineering Mansoura University, Mansoura, Egypt | ||||
| 2Mechanical Engineering Department, University of Mansoura, CO 35516, Egypt | ||||
| Abstract | ||||
| - Carbon dioxide from fossil fuel burning is the major contributor to the greenhouse effect from human activities. Within the many options and actions for mitigation of greenhouse gas emissions, CO2 capture and storage is emerging as a viable option to achieve the very deep cuts in emissions that might be needed in the medium term. One promising means of CO2 capture for fossil fuels based power plants is to use a lime carbonation–calcination cycle. The aim of the current work is to enhance the carbonation process by applying jetting fountain fluidized bed. A jetting fountain fluidized bed reactor has been designed, fabricated and installed to carry out the experimental work. It has 105 mm ID and 4000 mm height. Jabal al-Tair limestone has been utilized as bed materials. During the tests a mixture of nitrogen and carbon dioxide, that simulates exhaust gases (15% CO2), is fed through a bed of lime particles. The lime particles are carbonated by capturing CO2. The concentration of CO2 is measured after the bed to estimate the quantities of CO2 that combined with the lime particles. The influences of operating conditions including bed temperature, fluidization velocity, jet air ratio and jet orifice height on the capture efficiency of CO2 have been studied. The findings of the present work indicate that the jetting fountain fluidized bed is more efficient in carbonation where the CaO conversion rate increases and the time required for full conversion reduces. Applying jetting fountain configuration enhances gas solids contact and improves the interphases mass exchange between bubbles and emulsion. The capture efficiency of CO2 rate was found to improve with bed temperature and fluidization velocity. On the other side, studying the influences of jet air ratio and jet orifice height demonstrate that there is an intermediate value at which the capture efficiency records an optimal | ||||
| Keywords | ||||
| Fluidized bed; Limestone; CO2 capture | ||||
|
Statistics Article View: 121 PDF Download: 188 |
||||
