GREENHOUSE HEATING AND VENTILATION CONTROL SYSTEM | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 19, Volume 31, Issue 2, April 2014, Page 667-682 PDF (1.13 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2014.99670 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Shaymaa Abed Elfattah1; Mubarak M. Mostafa1; Mahmoud A. Elnono1; Ahmed M. Kassem2 | ||||
| 1Agric. Eng. Dept., Fac. of Agric., Ain Shams Univ., Egypt. | ||||
| 2Agric. Eng. Research Institute, ARC, Egypt. | ||||
| Abstract | ||||
| This research aims to study the effect of using the heating and ventilation system on the production and quality of tomato crop in winter season. Two different poly-greenhouse models were constructed at Al-Zahwiyyin, Egypt (ɸ= 30°15′N). It was equipped with heating and ventilation control system (treatment) and the other was a traditional greenhouse (control). Results of the experimental work show that the specific approach of heating and mechanical ventilation for tomato crop production enhances the rate of growth and increasing the fresh tomato yield by 57.69% comparing with control greenhouse. The quality of tomato crop of the treatment greenhouse can be noticed through the firmness and toughness value comparing with the control one. They were greater by 85% and 62.5%, respectively. | ||||
| Keywords | ||||
| Greenhouses; Heating system; Ventilation; Relative humidity | ||||
| References | ||||
|
Aldrish,A.R.and Bartok.W.J.(1994).greenhouse engineering. NRASE-33-3rd edition
BATU, A. (1998). Some factors affecting on determination and measurement of tomato firmness. Tr. J. of agriculture and forestry 22(1998) 411-418.
Buffington, D.E.; Bucklin, D.A.; Henley, R.W. and Mc Connell, D.B. (2002). Fans for greenhouses, institute of food and agriculture science, university of Florida AE-12
Gao,Z.(2012).Dehumidification of greenhouses in cold regions. Thesis, degree of, Sc, Uni. of Saskatchewan.
Jackman, R. L., A. G. Marangoni and Stanely, D. W. (1990). Measurement of tomato fruit firmness, Hort Science. 25(7):781-783.
Rajabipour,A.(1995).Effects of Ca, K and water table depth on tomato mechanical properties; PhD thesis, McGill Univ. MacDonald campus.
Shafiee, s; Motlag,A.M; Didar,R.A., and Minaee,s.(2008). Investigation the effect of skin on mechanical behavior of apple, journal of food technology 6(2):86-91, 2008.ISSN:1684-8426.
Sirisomboon,P. ; Tanaka,M. ; Kojima,T. and William,P. (2012). Nondestructive estimation of maturity and textural properties on tomato ‘momotaro’ by near infrared spectroscopy. Journal of Food Engineering 112 (2012) 218-226.
Li, Z.; Li,P.; and Liu, J. (2011), Physical and mechanical properties of tomato fruits as related to robot’s harvesting. Journal of food engineering 103 (2011) 170- 178. | ||||
|
Statistics Article View: 119 PDF Download: 380 |
||||
