DEVELOPMENT OF THE THRESHING MACHINE FOR IMPROVING ITS PERFORMANCE UNDER EGYPTIAN CONDITIONS
El Saiedy, E., Gamea, G., El Ashker, A. (2014). DEVELOPMENT OF THE THRESHING MACHINE FOR IMPROVING ITS PERFORMANCE UNDER EGYPTIAN CONDITIONS. EKB Journal Management System, 31(1), 65-90. doi: 10.21608/mjae.2014.99696
E. A. El Saiedy; G.R. Gamea; Adel M. El Ashker. "DEVELOPMENT OF THE THRESHING MACHINE FOR IMPROVING ITS PERFORMANCE UNDER EGYPTIAN CONDITIONS". EKB Journal Management System, 31, 1, 2014, 65-90. doi: 10.21608/mjae.2014.99696
El Saiedy, E., Gamea, G., El Ashker, A. (2014). 'DEVELOPMENT OF THE THRESHING MACHINE FOR IMPROVING ITS PERFORMANCE UNDER EGYPTIAN CONDITIONS', EKB Journal Management System, 31(1), pp. 65-90. doi: 10.21608/mjae.2014.99696
El Saiedy, E., Gamea, G., El Ashker, A. DEVELOPMENT OF THE THRESHING MACHINE FOR IMPROVING ITS PERFORMANCE UNDER EGYPTIAN CONDITIONS. EKB Journal Management System, 2014; 31(1): 65-90. doi: 10.21608/mjae.2014.99696

DEVELOPMENT OF THE THRESHING MACHINE FOR IMPROVING ITS PERFORMANCE UNDER EGYPTIAN CONDITIONS

Misr Journal of Agricultural Engineering
Article 4, Volume 31, Issue 1, January 2014, Page 65-90  XML PDF (1.28 MB)
Document Type: Original Article
DOI: 10.21608/mjae.2014.99696
View on SCiNiTO View on SCiNiTO
Authors
E. A. El Saiedy1; G.R. Gamea2; Adel M. El Ashker3
1Lecturer. Dept of Ag. Eng., Fac. of Ag., Minoufiya Univ., Egypt.
2Asso Prof.Dept of Ag. Eng., Fac. of Ag., Minoufiya Univ., Egypt.
3Assist Researcher, Ag. Eng. Res.Ins. Dokki, Giza, Egypt.
Abstract
To improve the performance of the locally manufactured threshing machines, a feeding system wasdevelopedto use with it. The aim of this work is to reduce both the threshing costs and the injuries to the laborers.
The main objectives of this study are:
1-Develop a feeding system for threshing machine.
2-Evaluat the performance of the threshing machinesbefore modification at three moisture contents  for wheat crop 17.2, 15.2 and 13.4 % and four drum speeds 700, 800, 900 and 1000 rpm (27.47, 31.4, 35.3 and 39.25 m/s) .
3-Test the threshing machinesafter modification under the same conditions at different angels of conveyor belt of 17.5, 20, 23 and 26 degree.
The experimental results showed that the performance of a threshing machine after modification is better than before modification. The value of the feeding rate after modification increased about 26% than before modification. It was of 2.28 ton/h compared to 1.68 ton/h before modification. Threshing efficiency of 99.50 %, cleaning efficiency of 99.70 %, unthreshed grain losses of 0.50 %, grain losses in straw of 0.30 %, grain damage of 0.65 %, cutting length of straw of 1.20 cm, total grain losses of 5.37 kg/ton were also recorded before modification. The operation cost was 22.8LE / ton and the threshing cost was 36.4 LE / tonafter the addition of the costs of lost grains at drum speed of 1000 rpm. These results were obtained at moisture content of 13.4 %, and conveyor belt angle of 20 degree.

 On the other hand the results before modification threshing efficiency it was of 98.20 %, cleaning efficiency of 98.40 %, unthreshed grain losses 1.80 %, grain losses in straw of 1.00 %, grain damage of 2.10 %, cutting length of straw of 1.8 cm, total grain losses of 18.13 kg/ton were recorded. The operation cost was 33.33 LE/ton and threshing cost was 79.2 LE/tonafter the addition of the costs of lost grains at drum speed of 1000 rpm and moisture content of 13.4 %. The specific energies were 11.3 and 8.1 kW.h/ton before and after modification at the same previous conditions.
References
Abo El-Naga, M.H.M., M.K.Afify and S.E.Badr (2004) "Utilization of Local wheat thresher machine for threshing mungbean" Misr J. Ag. Eng. 21 (2): 423-436.

AOAC (1990) "Association official Analytical chemists".15th edn. Wash. Dc, U.S.A.

Daghan, I; T.Hakan and Y. Canbaz (2012) "Upper extremity injuries due to threshing machine" Turkish Journal of trauma 2012; 18 (1):55-60.

Desta, K. and T.N. Mishra (1990) "Development and performanceEvaluation   of a Sorghum thresher" AMA, 21 (3): 33-37.

El-Awady, M. N.(1978). Tractor and farm machinery. Text book, Faculty of Agriculture, Ain- Shams University, Cairo, Egypt. PP: 164-167

El-Awady, M. N; E. Y. Ghoniem and A. I. Hashim (1982)''A critical comparison between wheat combine harvester under Egyptian condition''. R. S. No.1920 Ain Shams Univ. Col.Agr. Pp. 1-12

El-Mufti, I; S. I. Ahmad and A. Majid (1989) ''Farm accidents in Pakistan''Agric Mech. Asia Africa Latin America 20, 73-75.

Hunt, D. (1983)''Farm power and machinery management.''(eight-edition) pp.135 - 137.      

Khattab A. M.; M. M. EL-Sharabasy and M. M. Mahmoud (2007) "Development of feeding device in a Turkishing machine'' Misr. J.Agric. Eng., 235-257.

Mohan, D. and R. Patel (1992) ''Design of safer agricultural equipment'' application of ergonomics and epidemiology. Int. J. Ind.Ergonom. 10,301-309.

- المجلة الزراعیه - وزارة الزراعه المصریه 2012

Statistics
Article View: 151
PDF Download: 356