Study of Heat Transfer in Energy Storage System Using Phase Change Material.
Soliman, A., Sultan, A., Mousa, M., Ramzy, A. (2020). Study of Heat Transfer in Energy Storage System Using Phase Change Material.. EKB Journal Management System, 40(1), 32-44. doi: 10.21608/bfemu.2020.100795
A. S. Soliman; Ahmed A. Sultan; M. G. Mousa; A. Ramzy. "Study of Heat Transfer in Energy Storage System Using Phase Change Material.". EKB Journal Management System, 40, 1, 2020, 32-44. doi: 10.21608/bfemu.2020.100795
Soliman, A., Sultan, A., Mousa, M., Ramzy, A. (2020). 'Study of Heat Transfer in Energy Storage System Using Phase Change Material.', EKB Journal Management System, 40(1), pp. 32-44. doi: 10.21608/bfemu.2020.100795
Soliman, A., Sultan, A., Mousa, M., Ramzy, A. Study of Heat Transfer in Energy Storage System Using Phase Change Material.. EKB Journal Management System, 2020; 40(1): 32-44. doi: 10.21608/bfemu.2020.100795

Study of Heat Transfer in Energy Storage System Using Phase Change Material.

MEJ- Mansoura Engineering Journal
Article 10, Volume 40, Issue 1, March 2015, Page 32-44  XML PDF (1 MB)
Document Type: Research Studies
DOI: 10.21608/bfemu.2020.100795
View on SCiNiTO View on SCiNiTO
Authors
A. S. Soliman* 1; Ahmed A. Sultan2; M. G. Mousa2; A. Ramzy2
1Mechanical Power Engineering - Faculty of Engineering - Mansoura University Mansoura Egypt
2Mechanical Power Engineering - Faculty of Engineering - Mansoura University Mansoura Egypt
Abstract
The usage of phase change materials to store heat in the form of latent heat is increased, because large quantity of thermal energy is stored in smaller volumes. A cylindrical thermal storage device is composed of an inner aluminum pipe having inner/outer diameter of 20/30 mm and length of 1000 mm. The pipe passes through a cylindrical storage device have a radius of 300 mm, fill with paraffin wax. In the present work, a numerical study of the effects of convection, number of fins and heating surface temperature on the storage characteristics of annular latent heat energy storage system (LHESS) using the CFD software FLUENT6.3.26. The results show that the effect of convection cannot be neglected, but it decreases when the space between fins decreases which occurs when numbers of fins increase. The heat transfer increases as the number fins increases and found that after 12 hours the rate of energy stored increased to 116.5% and 89.6% and 89.6% for 3 fins, 8 fins and 13 fins respectively. The temperature of  heating surface is not required only to be greater than the melting point of PCM  (paraffin wax) When increased to (T= 375K, 400K) found that it reduces the storage time energy to three and four  hours while it is six and a half hours in  the case of  heating surface temperature of (T= 350 K) and increases the stored energy in the PCM  to (114.4%)
Keywords
CFD; phase change material; heat transfer; LHESS
Statistics
Article View: 135
PDF Download: 261