MANUFACTURE AND EVALUATION OF A COMBINATION MACHINE FOR SEED BED PREPARATION, WATER HARVESTING AND PLANTING UNDER RAINFED AGRICULTURAL CONDITIONS

Morad, M. M.; Ali, M. M.

doi:10.21608/mjae.2012.101353

	MANUFACTURE AND EVALUATION OF A COMBINATION MACHINE FOR SEED BED PREPARATION, WATER HARVESTING AND PLANTING UNDER RAINFED AGRICULTURAL CONDITIONS
Misr Journal of Agricultural Engineering
Article 11, Volume 29, Issue 4, October 2012, Page 1437-1456 PDF (782.06 K)
Document Type: Original Article
DOI: 10.21608/mjae.2012.101353
View on SCiNiTO
Authors
M. M. Morad¹; M. M. Ali²
¹Prof. of Agric. Eng., Fac. of Agric., Zagazig Univ., Egypt.
²Assoc. Prof. of Agric. Eng., Fac. of Agric., Zagazig Univ., Egypt.
Abstract
Experiments were carried out to manufacture and evaluate the performance of a combination machine suitable for seed bed preparation, water harvesting and planting under rain fed agricultural conditions. The manufactured machine was compared with the traditional method under the same conditions. The machine performance was studied as a function of change in machine forward speed and plowing depth. Performance evaluation of the manufactured machine was carried out in terms of bulk density, and infiltration rate as a soil measurements; crop yield as a crop measurements; runoff and water use efficiency as a water measurements; field capacity and efficiency, required power, energy requirements and operational cost as a machine measurements. The experimental results reveal that the manufactured machine decreased runoff volume, energy and cost while increased crop yield and water use efficiency under the following conditions: - The use of the manufactured machine instead of the traditional method. - Machine forward speed of between 3.5 to 4.5 km/h. - Plowing depth of between 10 to 15 cm.


References
Awady, M. N. (1978). Tractor and farm machinery . Txt bk., Col. Ag., Ain Shams U.: 146-167. Black, C.A; D.D. Evan; J.L. White; L.E. Ensimenger and L.E. Clark (1965). Methods of soil analysis. Publisher Wisconsin, USA. Cuenca, R.H. (1989). Irrigation system – An Engineering Approach. Prentic – Hall, Inc., Englewood cliffs, NJ. 552pp. FAO (1993). Field measurements of soil erosion and runoff. Soils Bull. No (68). Rome, Italy. Hackwell, S.G., Rochester, E.W., Yoo, K.H., Burt, E.C. & Monroe, G.E. (1991). Impact of reservoir tillage on water intake and soil erosion. Transactions of the American Society of Agricultural Engineers, 34, 436–442. Hansen, H, and W. Trimmer (1997). Irrigation Runoff Control Strategies. Oregon State University Extension Service Publication. PNW 287. Hunt, D. (1983). Farm power and machinery management. 8th Ed. Iowa state Univ., Press Ames, Iows, USA: 364-368. Patrick, C., C. Kechavarzi, I. T. James , M. O’Dogherty & R. J. Godwin (2007). Developing reservoir tillage technology for semi-arid environments. British Society of Soil Science, Soil Use and Management, 23, 185–191. Rochester, E.W., Hill, D.T. & Yoo, K.H. (1994). Impact of reservoir tillage on run-off quality and quantity. Transactions of the American Society of Agricultural Engineers, 37(4), 1183–1186. Ventura, E., Norton, L. D., Ward, K, López-Bautista, M., and Tapia-Naranjo, A. (2003). A New Reservoir Tillage System for Crop Production in Semiarid Areas. 2003 ASAE Annual Meeting. American Society of Agricultural Engineers.
Statistics Article View: 126 PDF Download: 193