BIOMASS TECHNOLOGY PRODUCTION FROM AGRO-PROCESSING WASTES BY AN EXPELLER MACHINE | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 15, Volume 30, Issue 2, April 2013, Page 537-558 PDF (703.35 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2013.102075 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Mohamed I. Shoughy | ||||
| Agric. Eng. Res. Ins. (AEnRI), Dokki, Giza, Egypt. | ||||
| Abstract | ||||
| An extruder was developed and tested for forming biomass from agro-processing wastes. The experimental treatments included four screw speeds (0.789, 1.05, 1.41and 1.57m/s.), four die hole diameters of extruder (6, 8, 10 and 12mm) and three moisture levels (7.5, 10.5 and 13.6%) of two agro-processing wastes at different particle size (sawmill dust (≤ 3mm) and coarser corncob grinds (≤6.5mm). The results of the experiments showed that the particle size had a significant effect on machine productivity, pellets density, durability and specific energy requirement. The finer sawdust resulted in higher productivity, pellets density, durability and lower specific energy than the coarser corncob grinds. The machine productivity of sawdust was higher value by about 7% than the productivity of corncobs. The pellets density ranged from 0.81 to 1.24g/cm3 for sawdust and form 0.76 to 0.94g/cm3 for corncobs. The durability of sawdust pellets was higher by about 15.6% for corncobs pellets. While, the energy requirement of sawdust pellets was lower value by about 41.7% than for corncobs pellets. The pellets produced on the smallest die and lower moisture content had the best quality values. The combustion test indicated that the combustion of the pellets is more regular than the combustion of loose materials and provided the highest flue gas temperature and low carbon monoxide contents emitted. | ||||
| References | ||||
|
Adapa P., L. Tabil, G. Schoenau (2009). Compression characteristics of selected ground agricultural biomass. Agricultural Engineering International: the CIGR E journal. Manuscript 1347 (I):1-19.
ASAE Standard (2004). American Society of Agricultural Engineers – Standards, Engineering Practices, and Data. ASAE: St. Joseph, MI.
Bjorheden, R. (2006). Drivers behind the development of forest energy in Sweden. Biomass and Bioenergy, 30(4), 289–295.
Chevanan, N.; K. Muthukumarappan; K.A. Rosentrater and J. L. Julson (2007). Effect of die dimensions on extrusion processing parameters and properties of DDGS-based aquaculture feed. Cereal Chemistry, 84(4), 389–398.
Chevanan N.; K. A. Rosentrater and K. Muthukumarappan (2010). Effects of processing conditions on single screw extrusion of feed ingredients containing DDGS. Food Bioprocess Technology, 3:111–120.
Chin, O.C. and K.M. Siddiqui (2000). Characteristics of Some Biomass Briquettes Prepared under Modest Die Pressures. Biomass and Bioenergy, 18: 223-228.
El-Saeidy E. (2004).Renewable Energy in Agriculture in Egypt: Technological Fundamentals of Briquetting Cotton Stalks as a Biofuel Renewable Energy in Agriculture in Egypt. Ph. D Thesis, Humboldt University, Berlin, Germany.
Granada, E., L.M. López González, J.L. Míguez and J. Moran (2002). Fuel lignocellulosic briquettes, die design and products study. Renewable Energy, 27:561-573.
Hess, J.R., K.L.Kenney, L.P Ovard, E.M. Searcy and C.T. Wright (2009). Uniform-Format Solid Feedstock Supply System: A Commodity-Scale Design to Produce an Infrastructure-Compatible Bulk Solid from Lignocelluloses Biomass: 4-08-14752. Idaho National Laboratory, Bioenergy.
Jin Z. and S. Wang (2011). Specific energy requirement for compacting corncobs. Advanced material research, 148-149: 245-252.
Kaliyan N. and R.V. Morey (2006). Densification of corn stover. ASAE Paper No. 056134. St. Joseph, MI: ASABE.
Kaliyan N. and R.V. Morey (2007). Strategies to improve durability of switch grass briquettes. An ASABE paper number: 076182.
Mark, S. (2008). Feedstock and process variables influencing biomass densification. M. Sc. Thesis, Dep. of Agric. and Bioresource Eng., Unive. of Saskatchewan, Saskatoon , Canada.
Mani, S., L.G. Tabil and S. Sokhansanj (2006). Effects of compressive force, particle size and moisture content on mechanical properties of biomass pellets from grasses. Biomass and Bioenergy, 30: 648-654.
Saptoadi H. (2006). The best biobriquette dimension and its particle size. Proceedings of The 2nd joint international conference on "Sustainable Energy and Environment". 21-23 November 2006, Bangkok, Thailand.
Shoughy, M. I., A. A. FL-Keway, and Y. T. Hendawy (2011). Rice bran pellets production by using expeller machine. Misr J. Ag. Eng., 28(4): 975-998.
Shukla C. Y.; K. Muthukumarappan and J. L Julso. (2005). Effect of single screw extruder die temperature, amount of distillers dried grains with solubles (DDGS) and initial moisture content on extrudates. Cereal Chemistry: 82(1), 34–37.
Sokhansanj, S., S. Mani, X. B., P. Zaini and L. Tabil (2005). Binderless pelletization of biomass. Presented at the ASAE. Paper No. 056061, USA.
Sokhansanj, S., A. Kumar, A.F. Turhollow (2006). Development and implementation of integrated biomass supply analysis and logistics model (IBSAL). Biomass Bioenergy, 30: 838–847.
Thomas O. W. (2010). Factors affecting wood pellet durability. MS C. Thesis in Agric. Bio. Eng., The Pennsylvania State University Dep. of Agric. and Bio. Eng., USA.
Tumuluru, J. S., L. Tabil, A. Opoku, M. R. Mosqueda and O. Fadeyi (2010a). Effect of process variables on the quality characteristics of pelleted wheat distiller’s dried grains with soluble, Biosystems Engineering 105(4): 466–475.
Tumuluru, J. S., C. T. Wright, K. L. Kenney and J. R. Hess (2010b). A Technical Review on Biomass Processing: Densification, Preprocessing, Modeling and Optimization. ASABE Meeting Presentation. Paper Number: 1009401.
Uppal, S. L. (1984). Electricalpower. Published by 2-B Nath Market, Nai Srak, New Delhi, India.
Van Dam, J.E.G., M.J.A. van den Oever, W. Teunissen, E.R.P. Keijsers and A.G. Peralta (2004). Process for production of high density/high performance binderless boards from whole coconut husk. Part 1: lignin as intrinsic thermosetting binder resin. Industrial Crops and Products, 19: 207-216. | ||||
|
Statistics Article View: 113 PDF Download: 172 |
||||
