DESIGN AND FABRICATION OF A SIMPLIFIED MECHANICAL HANDLING SYSTEM OF RICE STRAW BALING OPERATION TO REDUCE ENVIRONMENT POLLUTION
El-Gindy, A., Baiomy, M., Abdelhamed,, M., Mosa, S. (2009). DESIGN AND FABRICATION OF A SIMPLIFIED MECHANICAL HANDLING SYSTEM OF RICE STRAW BALING OPERATION TO REDUCE ENVIRONMENT POLLUTION. EKB Journal Management System, 26(2), 667-685. doi: 10.21608/mjae.2009.109082
A. M. El-Gindy; M. A. Baiomy; M. M. Abdelhamed,; Sahar, A. Mosa. "DESIGN AND FABRICATION OF A SIMPLIFIED MECHANICAL HANDLING SYSTEM OF RICE STRAW BALING OPERATION TO REDUCE ENVIRONMENT POLLUTION". EKB Journal Management System, 26, 2, 2009, 667-685. doi: 10.21608/mjae.2009.109082
El-Gindy, A., Baiomy, M., Abdelhamed,, M., Mosa, S. (2009). 'DESIGN AND FABRICATION OF A SIMPLIFIED MECHANICAL HANDLING SYSTEM OF RICE STRAW BALING OPERATION TO REDUCE ENVIRONMENT POLLUTION', EKB Journal Management System, 26(2), pp. 667-685. doi: 10.21608/mjae.2009.109082
El-Gindy, A., Baiomy, M., Abdelhamed,, M., Mosa, S. DESIGN AND FABRICATION OF A SIMPLIFIED MECHANICAL HANDLING SYSTEM OF RICE STRAW BALING OPERATION TO REDUCE ENVIRONMENT POLLUTION. EKB Journal Management System, 2009; 26(2): 667-685. doi: 10.21608/mjae.2009.109082

DESIGN AND FABRICATION OF A SIMPLIFIED MECHANICAL HANDLING SYSTEM OF RICE STRAW BALING OPERATION TO REDUCE ENVIRONMENT POLLUTION

Misr Journal of Agricultural Engineering
Article 7, Volume 26, Issue 2, April 2009, Page 667-685  XML PDF (462.83 K)
Document Type: Original Article
DOI: 10.21608/mjae.2009.109082
View on SCiNiTO View on SCiNiTO
Authors
A. M. El-Gindy1; M. A. Baiomy2; M. M. Abdelhamed,3; Sahar, A. Mosa4
1Prof., Agr. Eng. Dept., Faculty of agric. Ain Shams Un., Egypt
2Senior Researcher, Agric., Eng. Res. Inst., Agric. Res. Center., Egypt.
3Prof., Faculty Of Engineering, Ain Shams Univ., Egypt.
4En., Agric., Eng. Res. Inst., Agric. Res. Center, Egypt.
Abstract
The burning of crop residues is one of national problems in Egypt especially after harvesting or threshing operations to the different crops.  The main objective in the present study is: Design, fabricate and evaluate the mechanical system of threshing and handling rice straw directly to the baler. A conveyor belt was desgined to transport the rice straw from threshing machine to the baler. Selections of all bearings of the mechanical system were done according to the load carrying capacity. Welding joints were checked against the stresses. The fuel consumption was measured for the system. The power requirement to operate the belt conveyor and baler was calculated. All power calculations were provided to indicate the size of tractor and evaluate the performance of the proposed system. Several experiments and tests were carried out at different speeds. The conveyor dimensions were determined to be 3000 mm length, 750 mm width and the height was variable to be adjusted opposite to the machine throw and the feeding of baler. The belt conveyor was covered with a canvas to reduce dust broadcasting.
References
- Abd El-Mottaleb, A. F. 2002. Comparative study between pick up, stationary and round balers. Misr J. Ag. Eng., 19 (1) pp. 23-39

- Afify, M. T.; A. H. Bahnasawy and S. A. Ali, 2002. Effect of rice straw picking up method on the performance of a rectangular baler. Written for presentation at the AIC 2002 Meeting CASE /SCGR program Saskatoon, Saskatchewan July 14-17. pp. 1-15

- Agricultural Magazine, 1999. The scientific face to the black cloud towards best investment of the agricultural residues. Dec., Year 41 (493) pp. 17-20.

- Awady, M. N.; 1982. Engineering of tractors and agricultural machinery. Arabic Text. 5 th. Ed. Pp 161- 164.

- Baiomy, M. A. and Y. F. Sharobeemm, 1999. Comparative evaluation of rice harvesting and threshing of small farms. The Center for Research and Technological Development Studies. The first conference. and the challenges of the next century. Helwan university. Egypt.

- California Agriculture Magazine 1991. 199 Volume 47 part 4 (July, August),

- El-Gindy, A. M.; M. A. Gad alaa; M. A. Baiomy and Sahar, El- S. Mosa, 2001. A study on the effect of threshing mechanization systems on environmental pollution. Journal of environmental science, 3 (2) pp. 415-435.

-El-Gindy Abd-El-G. M., Mohsen Abd-Gad-Allah, Magdy A. Baiomy and Sahar E. A. Mousa 2005, Environmental Pollution Caused by Cereal Crops Threshing Mechanization Systems Affecting Human Health. International Conference of Agric. Mechanization, Yasmine Hamm mat – Tunise 9 – 11 November, P: 323-333.

- El Sahrigy, A. F. and Z. A. El-Haddad, 1982. The national plan of form mechanization in Egypt from (82/83 to 86/87) prepared by Technical Office of Agric. Mechanization project attachment (3b) pp7.

- Hanna, G. B.; A. M. Berry; and M. M. Danasory, 1985. Intensifying the use of mowers  under Egyptian conditions, J. of Cairo Univ.

- Mosa, Magda M. 1998. Engineering factors affecting the development of grading machine for citrus. Ph. D. Thesis faculty of agriculture, CairoUniversity.

- Paul H.B. and O.E. Adams, 1983. Machine design. Mc Graw- Hill International Book Company. Third edition. pp. 287.

- Saher El. A. M. 2008.Design of Mechanical System Hooked with Threshing Machines to       Convert Rice Straw into Bales to Reduce Pollution of Environment, Unpublished Doctor of Philosophy, AinShamsUniversity, Institute of Environmental Studies and Research

-Shigley, J. E. and C.R. Mischke, 1989. Mechanical engineering design. Mo Graw- Hill Publishing Company. New York.

المراجع العربیة

- السهریجى، أ.  ف. 1997 أساسیات هندسة التصنیع الزراعى- المکتبة الأکادیمیة– القاهرة     

Statistics
Article View: 232
PDF Download: 264