EFFECT OF KINEMATIC PARAMETER ON SOME PERFORMANCE INDICES FOR THE SELF-PROPELLED COMPOST TURNING MACHINE | ||||
| Misr Journal of Agricultural Engineering | ||||
| Article 4, Volume 26, Issue 1, January 2009, Page 56-68 PDF (257.77 K) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/mjae.2009.109863 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| T.Z. Fouda | ||||
| Assoc. Prof. of Agric. Eng., Fac. of Agric. Tanta Unvi., Egypt. | ||||
| Abstract | ||||
| Self-propelled compost turning machine performance in terms of machine capacity, compost density, fuel consumption, energy requirements and turning cost was investigated as a function of change in the kinematic parameter (ratio of drum peripheral velocity to machine forward speed) during the compost turning operation. From the obtained data it can be concluded that: - Machine capacity increased by decreasing the kinematic parameter. - Compost density decreased by increasing the kinematic parameter . -Energy requirements as well as turning cost were minimum at a kinematic parameter value of 35 . | ||||
| References | ||||
|
Abd El-Mottaleb A.F., (2006). Effect of some operating parameters on the performance of compost turning machines. Misr J. Ag. Eng., 23 (1): 40-54.
Awady, M. N. (1978). Tractor and farm machinery . Txt bk., Col. Ag., Ain Shams U.: 146-167.
Alfano, G.; C. Belli, G. Lustrato, and G. Ranalli (2007) Pile composting of two-phase centrifuged olive husk residues: Technical solutions and quality of cured compost DISTAAM, University of Molise, 86100 Campobasso, Italy
Barger E. L.; J. B. L. Edohl; W. M. Carletor and E. G. Mchibben (1963). Tractor and their power units. 2nd Ed, Wileysons Inc., New YorkU.S.A.
Fouda, T, A.F Abd El-Mottaleb and M. M. Morad (2008) Manufacture And Performance Evaluation Of A Self-Propelled Compost Turning Machine 24(4): October (2008)
Kepner, R. A;R.Bainer and E.L. Barger (1972). Principles of farm machinery. The AVI pub. Co., Inc. pp. 468.
Klenin, N. E.; E. F. popov and V. A. Sakun (1985). Agricultural machines. America publishing Co. prt. Lid., New Delhi. 633pp.
Morad, M.M. and M.A. El-Shazly (1994)Effect of some operating parameters on rotary – plow performance . Misr, J. Ag. Eng., 11 (4) :1009-1020
El shal M.s. and M. M. Morad (1991) Improving the combine header performance in respect to rice grain losses Misr. J. Ag. Eng., 8 (1) :1-10
Mohamed, A., Morad, M. M. and M. A. Arnaout Development of the reciprocating mower for harvesting lentil crop Misr. J. Ag. Eng., 17 (1) : 1-16 | ||||
|
Statistics Article View: 108 PDF Download: 159 |
||||
