COOLING CHARACTERISTICS OF PARTIALLY HOLLOW FINNED PLATE EXPOSED TO JET IMPINGEMENT | ||||
| JES. Journal of Engineering Sciences | ||||
| Article 6, Volume 36, No 4, July and August 2008, Page 841-862 PDF (850.12 K) | ||||
| Document Type: Research Paper | ||||
| DOI: 10.21608/jesaun.2008.117288 | ||||
 View on SCiNiTO | ||||
| Authors | ||||
| Mohamed El-sayed Gomaa1; Abd Alla Galal Gomaa2; El-Desuki Ibrahim Eid3 | ||||
| 1Specialized Studies Academy, Workers University, Technology Dept., Ismailia, EGYPT. | ||||
| 2Refr. and A/C Dept., The Faculty of Industrial Education, Helwan University, Cairo, EGYPT | ||||
| 3Mech. Dept., the Faculty of Industrial Education, Suez Canal University, Suez, EGYPT. | ||||
| Abstract | ||||
| In the present work, experimental and numerical investigations have been performed to determine the enhancement of cooling characteristics of partially hollow finned plate due to its exposure to a jet impingement. Six test specimens were designed and manufactured with a particular reference of the heat sink of a PC processor as a test specimen. The hollow shapes were cut in the central zone of the specimens by an adequate cut to form a cylindrical hole or frustum-conical holes of different vertex angles. The effects of Reynolds number, angle of attack and nozzle-to-surface distance on the enhancement of cooling characteristics have been highlighted. Empirical correlations for Nusselt number at the stagnation zone of each hollow shape were exhibited. A three-dimensional numerical simulation using the CFD FLUENT-6.2- code was applied to the case study. The validated CFD model highlights the flow characteristics through the specimens. The results show that the partially hollow finned plate has the potential to deliver a remarkably higher enhancement in the thermal performance if it is compared with those traditional ones. | ||||
| Keywords | ||||
| Jet impingement; Heat sink; Hollow shapes; Thermal cooling; Enhancement | ||||
|
Statistics Article View: 70 PDF Download: 247 |
||||
