SIMPLIFY CHARTS FOR THE DESIGN OF VERTICAL FORMWORK SYSTEMS | ||||
JES. Journal of Engineering Sciences | ||||
Article 3, Volume 37, No 6, November and December 2009, Page 1359-1367 PDF (805.06 K) | ||||
Document Type: Research Paper | ||||
DOI: 10.21608/jesaun.2009.128512 | ||||
View on SCiNiTO | ||||
Author | ||||
K. M. Shawki | ||||
Assistant Professor, construction and building engineering Dept. Collage of Engineering and Technology Arab Academy for Science, Technology and Martine Transport -Alexandria –Egypt | ||||
Abstract | ||||
This paper presents simplify charts for the design of traditional wall formwork systems. The first step is to determine the pressure due to fresh concrete using the cement type , concrete weight , rate of placing and the temperature .The second step is to determine the safe distance between studs using plywood thicknesses 19 or 22 or25 mm .The third step is to determine the distance between walls using studs of 50*100 mm (2*4 in) or 50*125 mm (2*5 in) or 50*150 mm (2*6 in) lumber .Finally the safe distance between ties is determined using wale section of double 50*100mm (2*4 in) or 50*125 mm (2*5 in) lumber. | ||||
Keywords | ||||
wall formwork; construction | ||||
Statistics Article View: 89 PDF Download: 271 |
||||