EVALUATION OF IMPACT STRENGTH OF HEAT CURE ACRYLIC RESIN REINFORCED WITH NYLON FIBER MESH WITH AND WITHOUT PRESTRESSING (IN VITRO STUDY)
Abbas, S., Mahfouz, O., Aboushelib, M., Rady, N. (2021). EVALUATION OF IMPACT STRENGTH OF HEAT CURE ACRYLIC RESIN REINFORCED WITH NYLON FIBER MESH WITH AND WITHOUT PRESTRESSING (IN VITRO STUDY). EKB Journal Management System, 46(Issue 1), 85-90. doi: 10.21608/adjalexu.2021.144857
Sarah O. Abbas; Osama A. Mahfouz; Mostafa N. Aboushelib; Nermeen A. Rady. "EVALUATION OF IMPACT STRENGTH OF HEAT CURE ACRYLIC RESIN REINFORCED WITH NYLON FIBER MESH WITH AND WITHOUT PRESTRESSING (IN VITRO STUDY)". EKB Journal Management System, 46, Issue 1, 2021, 85-90. doi: 10.21608/adjalexu.2021.144857
Abbas, S., Mahfouz, O., Aboushelib, M., Rady, N. (2021). 'EVALUATION OF IMPACT STRENGTH OF HEAT CURE ACRYLIC RESIN REINFORCED WITH NYLON FIBER MESH WITH AND WITHOUT PRESTRESSING (IN VITRO STUDY)', EKB Journal Management System, 46(Issue 1), pp. 85-90. doi: 10.21608/adjalexu.2021.144857
Abbas, S., Mahfouz, O., Aboushelib, M., Rady, N. EVALUATION OF IMPACT STRENGTH OF HEAT CURE ACRYLIC RESIN REINFORCED WITH NYLON FIBER MESH WITH AND WITHOUT PRESTRESSING (IN VITRO STUDY). EKB Journal Management System, 2021; 46(Issue 1): 85-90. doi: 10.21608/adjalexu.2021.144857

EVALUATION OF IMPACT STRENGTH OF HEAT CURE ACRYLIC RESIN REINFORCED WITH NYLON FIBER MESH WITH AND WITHOUT PRESTRESSING (IN VITRO STUDY)

Alexandria Dental Journal
Article 2, Volume 46, Issue 1, April 2021, Page 85-90  XML PDF (471.78 K)
Document Type: Original Article
DOI: 10.21608/adjalexu.2021.144857
View on SCiNiTO View on SCiNiTO
Authors
Sarah O. Abbas email 1; Osama A. Mahfouz2; Mostafa N. Aboushelib3; Nermeen A. Rady4
1Instructor at Removable Prosthodontics Department, Faculty of Dentistry, Alexandria University, Alexandria, Egypt
2Professor of Removable Prosthodontics, Faculty of Dentistry, Alexandria University, Alexandria, Egypt
3Assistant professor of Dental Biomaterials, Faculty of Dentistry, Alexandria University, Alexandria, Egypt
4Lecturer of Removable prosthodontics, Faculty of Dentistry, Alexandria University, Alexandria, Egypt.
Abstract
INTRODUCTION: Acrylic resin prostheses are liable to high levels of forces due to their frequent removal by patients and accidental slippage. Hence, the impact strength of acrylic denture base material is of major significance in providing long-term functional prostheses.
OBJECTIVES: The aim of this study was to evaluate the reinforcing effect of prestressed nylon fiber meshwork and the specimen thickness increase on the impact strength of heat cure acrylic resin.
MATERIALS AND METHODS: 72 specimens were divided into 3 groups (I, II and III) which were heat cure acrylic resin (control), Nylon mesh reinforced acrylic resin and prestressed-nylon mesh reinforced acrylic resin. Each group was formed of 24 specimens, which were further subdivided into 3 subgroups (A, B and C) of different dimensions; 75 mm × 10 mm × 3 mm and 75 × 10 × 4 mm and 75 x 10 x 5 mm. Thus, the specimens were divided into 9 experimental subgroups (n=8 per subgroup). A Charpy’s impact tester was used to measure the impact strength of acrylic resin. The data were analyzed using Anova-test (p≤0.05).
RESULTS: The mean impact strength of groups II and III was higher than the control group I impact strength. The difference between the reinforced groups and control group was statistically significant for all specimen thicknesses.
CONCLUSIONS: The impact strength of heat cure acrylic resin was increased by the incorporation of nylon fiber mesh whether prestressed or not.
Keywords
Prestressing; Nylon meshwork; Acrylic resin; Impact strength; Reinforced PMMA
References
1. Hargreaves A. Polymethylmethacrylate as a denture base material in service. J Oral Rehabil. 1975;2:97-104.
2. Tihan TG, Ionita MD, Popescu RG, Iordachescu D. Effect of hydrophilic–hydrophobic balance on biocompatibility of poly (methyl methacrylate)(PMMA)–hydroxyapatite (HA) composites. Mater. Chem. Phys. 2009;118:265-9.
3. Darbar UR, Huggett R, Harrison A. Denture fracture--a survey. Br Dent J. 1994;176:342-5.
4. Meng TR, Latta MA. Physical properties of four acrylic denture base resins. J Contemp Dent Pract. 2005;6:93-100.
5. Kim SH, Watts DC. The effect of reinforcement with woven E-glass fibers on the impact strength of complete dentures fabricated with high-impact acrylic resin. J Prosthet Dent. 2004;91:274-80.
6. Ghazali SE, Glantz PO, Strandman E, Randow K. On the clinical deformation of maxillary complete dentures: Influence of denture-base design and shape of denture-bearing tissue. Acta Odontol Scand. 1989;47:69-76.
7. Oku JI. Impact properties of acrylic denture base resin. 3. Impact properties of cross-linked polymers. Dent Mater J. 1989;8:215-22.
8. Rodford R. The development of high impact strength denture-base materials. J Dent. 1986;14:214-7.
9. Rodford RA. Further development and evaluation of high impact strength denture base materials. J Dent. 1990;18:151-7.
10.Uzun G, Hersek N, Tincer T. Effect of five woven fiber reinforcements on the impact and transverse strength of a denture base resin. J Prosthet Dent. 1999;81:616-20.
11.Nejatian T, Johnson A, Van Noort R, editors. Reinforcement of denture base resin. Advances in Science and Technology; 2006: Trans Tech Publ.
12.Vallittu PK, Lassila VP. Effect of metal strengthener's surface roughness on fracture resistance of acrylic denture base material. J Oral Rehabil. 1992;19:385-91.
13.Tacir I, Kama J, Zortuk M, Eskimez S. Flexural properties of glass fiber reinforced acrylic resin polymers. Aust Dent J. 2006;51:52-6.

14.Foo H, Lindquist TJ, Aquilino SA, Schneider RL, Williamson DL, Boyer DB. Effect of polyaramid fiber reinforcement on the strength of 3 denture base polymethyl methacrylate resins. J Prosthodont. 2001;10:148-53.
15.Tandon R, Gupta S, Agarwal SK. Denture base materials: From past to future. Indian J Dent Sci. 2010;2:33-9.
16.Schlichting LH, de Andrada MA, Vieira LC, de Oliveira Barra GM, Magne P. Composite resin reinforced with pre-tensioned glass fibers. Influence of prestressing on flexural properties. Dent Mater. 2010;26:118-25.
17.Callister WD. Materials science and engineering: an introduction. 4th ed. New York: John Wiley & Sons; 1997.
18.Fu SY, Lauke B, Mäder E, Hu X, Yue CY. Fracture resistance of short-glass-fiber-reinforced and short-carbon-fiber-reinforced polypropylene under Charpy impact load and its dependence on processing. J. Mater. Process. Technol. 1999;89-90:501-7.
19.International Standard. ISO 20795-1 for Dentistry - Base polymers - Part 1: denture base polymers. Genève, Switzerland: International Organization for Standardization; 2008.
20.da Cruz Perez LE, Machado AL, Vergani CE, Zamperini CA, Pavarina AC, Canevarolo Jr SV. Resistance to impact of cross-linked denture base biopolymer materials: Effect of relining, glass flakes reinforcement and cyclic loading. J Mech Behav Biomed Mater. 2014;37:33-41.
21.Kelly E. Fatigue failure in denture base polymers. J. Prosthet. Dent. 1969;21:257-66.
22.Im SM, Huh YH, Cho LR, Park CJ. Comparison of the fracture resistance of glass fiber mesh- and metal mesh-reinforced maxillary complete denture under dynamic fatigue loading. J Adv Prosthodont. 2017;9:22-30.
23.John J, Gangadhar SA, Shah I. Flexural strength of heat-polymerized polymethyl methacrylate denture resin reinforced with glass, aramid, or nylon fibers. J Prosthet Dent. 2001;86:424-7.
24.Dogan OM, Bolayir G, Keskin S, Dogan A, Bek B, uuml, et al. The Effect of Esthetic Fibers on Impact Resistance of a Conventional Heat-cured Denture Base Resin. Dent Mater J. 2007;26:232-9.
25.Doğan OM, Bolayır G, Keskin S, Doğan A, Bek B. The evaluation of some flexural properties of a denture base resin reinforced with various aesthetic fibers. J. Mater. Sci.: Mater. Med. 2008;19:2343-9.
26.Vallittu PK. The effect of void space and polymerization time on transverse strength of acrylic-glass fiber composite. J Oral Rehabil. 1995;22:257-61.
27.Braden M, Davy K, Parker S, Ladizesky N, Ward I. Denture base poly (methyl methacrylate) reinforced with ultra-thin modulus polyethylene fibers. Br Dent J. 1988;164:109.
28.Ladizesky NH, Pang MKM, Chow TW, Ward IM. Acrylic resins reinforced with woven highly drawn linear polyethylene fibers. 3. Mechanical properties and further
aspects of denture construction. Aust Dent J. 1993;38:28-38.
29.Dixon DL, Breeding LC. The transverse strengths of three denture base resins reinforced with polyethylene fibers. J Prosthet Dent. 1992;67:417-9.
30.Yu SH, Ahn DH, Park JS, Chung YS, Han IS, Lim JS, et al. Comparison of denture base resin reinforced with polyaromatic polyamide fibers of different orientations. Dent Mater J. 2013;32:332-40.
31.Fonseca RB, Favarão IN, Kasuya AVB, Abrão M, Luz NFMd, Naves LZ. Influence of Glass Fiber wt% and Silanization on Mechanical Flexural Strength of Reinforced Acrylics. J Mater Sci Chem Eng. 2014;02:11-5.
32.Valittu PK. Flexural properties of acrylic polymers reinforced with unidirectional and woven glass fibers. J Prosthet Dent. 1999;81:318-26.
33.Kanie T, Arikawa H, Fuji K, Ban S. Deformation and flexural properties of denture base polymer reinforced with glass fiber sheet. Dent Mater J. 2005;24:297-303.
34.Singh K, Sharma S, Negi P, Kumar M, Rajpurohit D, Khobre P. Comparative Evaluation of Flexural Strength of Heat Polymerised Denture Base Resins after Reinforcement with Glass Fibres and Nylon Fibres: An In vitro Study. Adv Hum Biol. 2016;6:91-4.
35.Zappini G, Kammann A, Wachter W. Comparison of fracture tests of denture base materials. J Prosthet Dent. 2003;90:578-85.
36.Robinson J, McCabe J. Impact strength of acrylic resin denture base materials with surface defects. Dent Mater. 1993;9:355-60.
37.Uzun G, Hersek N, Tinçer T. Effect of five woven fiber reinforcements on the impact and transverse strength of a denture base resin. J. Prosthet. Dent. 1999;81:616-20.
38.Kanie T, Fujii K, Arikawa H, Inoue K. Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers. Dent Mater. 2000;16:150-8.

Statistics
Article View: 365
PDF Download: 795