Achieving sustainability in the design of Plastic Products | ||||
| International Design Journal | ||||
| Article 4, Volume 11, Issue 3 - Serial Number 40, May and June 2021, Page 47-57 PDF (3.35 MB) | ||||
| Document Type: Original Article | ||||
| DOI: 10.21608/idj.2021.162446 | ||||
 View on SCiNiTO | ||||
| Author | ||||
| Ahmed Mohamed Zayed Ahmed | ||||
| Lecturer, Industrial Design Department, Faculty of Applied Arts, Helwan University Dammitta University, ahmedzayed@du.edu.eg | ||||
| Abstract | ||||
| The research focuses on achieving sustainability in the design of plastic products by limiting the use of non-reusable or non-recyclable plastic products and the use of innovative alternatives to plastics, or design products to achieve sustainability and preserve environmental resources. The problem lies in the use of plastic materials as basic materials in the product's building, which are difficult to decompose, reuse or recycle, causing waste of materials and the accumulation of mountains of waste harmful to the environment and public health. The study focused on explaining the concept, objectives, and importance of sustainability and its relationship to product design in general and plastic products in particular. In addition to, studying the importance of plastic materials in product design, the volume of its waste, production rates in different sectors, the dispose methods and presenting the most important applications and experiences of achieving sustainability in product design at many companies to reduce the use of the harmful plastic material on the resources and the environment. finally, The research reached some solutions to reduce plastic waste, the necessity of finding alternatives to single-use plastic Materials in the design, not using plastic materials without the necessary need for their characteristics in the design, and using biodegradable, re-usable, or recycling plastics in the narrowest possible limits. | ||||
| Keywords | ||||
| Sustainability; Plastic Products; Waste Plastic Materials | ||||
| References | ||||
|
1- Ahmed, Maqbool, Bajahlan, & Ahmad bin Saeed. (2006). Adverse effects of using polystyrene containers for drinking water, hot drinks and food. (in Arabic)
2- Al-Bakry. Tamer, Ismail. Hadeel, (2016). The Effect of Green Marketing Mix on Consumer Behavior to Use the Product with Renewable Energy - An Analytical Study on Users of Solar Heaters in the City of Amman, Journal of the Baghdad College of Economic Sciences, Issue 47, Baghdad. (in Arabic)
3- Al-Swat, Ali bin Muhammad (2005). Sustainability as an entry point to enhance the role of Saudi engineers in building the national economy. Seminar entitled "The Engineer and his Role in Building the National Economy", King Fahd Cultural Center, Riyadh. (in Arabic)
4- Al-Rajab and Wafa Jassim. An article entitled: Plastic Pollution ... Threatening Nature and Man, Asharq Al-Awsat Online Newspaper, Issue No. (14517), August 7, 2018. (in Arabic)
5- Fatih. Ghalab, Fayrouz. Zroukhi (2019). Al-Taher Maymoun, The Sustainability of the Economic Corporation's Products from a Cleaner Production Technology Perspective, The Journal of Economics and Finance (JEF), Volume 5, Issue 1. (in Arabic)
6- Al-Qiq, Farid Sobh. (2010). Sustainability Concepts as a Comprehensive Methodology for Evaluating Urban Plans - Gaza Strip as a Case Study, The Third International Conference on Engineering and Reconstruction of Gaza, Gaza. https://www.researchgate.net/publication/269699096_mfahym_alastdamt_kmnhjyt_shamlt_ltqyym_almkhttat_almranyt_-_qta_ghzt_khalt_drasyt (in Arabic)
7- Maymoun, Al-Taher, Ghalab, Fatih, Rizeigat, & Boubaker. (2017), The Role of Environmental Management in Improving the Environmental Performance of Small and Medium Enterprises ... Constraints and Requirements for Implementation, Fikr Journal for Management, Accounting and Auditing, First Issue, Faculty of Economic, Commercial and Facilitation Sciences, University of Ghardaia, Algeria. (in Arabic)https://www.researchgate.net/publication/331258630
8- Mahmoud Abbas Badawi, Yousra Mohamed El-Beltagy, Accounting in the field of sustainable development between theory and practice, The New University Office, Alexandria, 2013, p. 21.9- (in Arabic)
9- Ahmad, S., Wong, K. Y., Tseng, M. L., & Wong, W. P. (2018). Sustainable product design and development: A review of tools, applications and research prospects. Resources, Conservation and Recycling, 132, 49-61. (in Arabic)
10- Carlo Vezzoli, C. K., Amrit Srinivasan, J.C. Diehl, Sompit Moi Fusakul, Liu Xin, Deepta Sateesh (January 2014). Product-Service System Design for Sustainability, Greenleaf Publishing Limited.
11- Davis, R. R. (1991). Learning how to learn: Technology, the seven multiple intelligences and learning.
12- Elduque A, Elduque D, Javierre C, Fernandez A, Santolaria J (2015) Environmental impact analysis of the injection molding process: analysis of the processing of high-density polyethylene parts. J Clean Prod 108:80–89
13- Geyer, R., Jambeck, J. R., & Law, K. L. (2017). Production, use, and fate of all plastics ever made. Science advances, 3(7), e1700782.
14- Grohens, Y., Kumar, S. K., Boudenne, A., & Weimin, Y. (Eds.). (2013). Recycling and reuse of materials and their products. CRC Press.
15- Hannah Ritchie (2018) - "Plastic Pollution". Published online at OurWorldInData.org. Retrieved from: 'https://ourworldindata.org/plastic-pollution' [Online Resource].
16- KRALJ¹, D. A. V. O. R. I. N., & MariČ, M. (2008). Building materials reuse and recycle. WSEAS transactions on environment and development, 4(5).
17- Leal Filho, W., Saari, U., Fedoruk, M., Iital, A., Moora, H., Klöga, M., & Voronova, V. (2019). An overview of the problems posed by plastic products and the role of extended producer responsibility in Europe. Journal of cleaner production, 214, 550-558.
18- WCED. "Our Common Future", Report of the World Commission on Environment and Development. Oxford University Press, Oxford, England, 1988.
19- A running list of action on plastic pollution. https://www.nationalgeographic.com/environment/2018/07/ocean-plastic-pollution-solutions/ Accessed 15th January 2021.
20- Report entitled “Plastic: A Material for Eternity? “, Accessed 27 October 2020, From: https://www.plasticgarbageproject.org/gyre-en
21- UN resolution pledges to plastic reduction by 2030 https://www.bbc.co.uk/news/science-environment-47592111 Accessed 15th Nov. 2020.
22- https://denkstatt.eu/field-of-interest/circular-economy-resources/ Accessed 17th December 2020.
23- https://www.hisour.com/ar/corporate-sustainability-40020/ , Accessed 23th June 2020.
24- https://ourworldindata.org/plastic-pollution , Accessed 13th September, 2020.
25- https://www.sabic.com/assets/ar/Images/SABIC-Sustainability-ARABIC_tcm12-22136.pdf Accessed 18th June, 2020.
26- https://ourworldindata.org/grapher/plastic-fate-to-2050 Accessed 5th December, 2020.
27- http://loadingdock.org/redo/Benefits_of_Reuse/body_benefits_of_reuse.html Accessed 15th. December 2020
28- https://www.scjohnson.com/ar-eg/our-purpose/social-responsibility-news/environment/sc-johnson-funds-sustainability-research-to-understand-environmental-perceptions-and-behaviors Accessed 13th. October 2020.
29- https://www.unenvironment.org/news-and-stories/press-release/exploring-alternative-materials-reduce-plastic-pollution Accessed 22th. January 2021.
30- https://video.nationalgeographic.com/video/short-film-showcase/00000155-a195-db77-a3dd-b3d7fc4e0000 Accessed 22th. October 2020.
31- https://www.greenolives.com.cn/product/mircowave-safe-rice-husk-mixed-corn-starch-biodegradable-bowls-eco-friendly-bowls-throw-away-bowls-eco-friendly-tableware/ Accessed 19th. January 2021.
32- https://www.ecosave.in/ Accessed 17th. November 2020.
33- https://www.newplasticseconomy.org/innovation-prize/winners/triocup Accessed 13th September 2020
34- https://www.bbc.com/news/business-40951041 Accessed 25th. November 2020.
35- https://www.boldbusiness.com/bold-living/seaweed-new-biodegradable-plastic/ Accessed 18th. October 2020. | ||||
|
Statistics Article View: 2,481 PDF Download: 1,086 |
||||
